Re: [Isisalsa-devel] Re: dmesg error with beta2
Status: Inactive
Brought to you by:
jeanseb
Menu
▾
▴
Re: [Isisalsa-devel] Re: dmesg error with beta2
|
From: Felipe S. <sol...@es...> - 2003-07-29 21:01:53
|
Pieter Palmers wrote:
> Please don't install gcc 3.1! Upgrading to gcc 3 is something you can
> easily spend a few days on.
> Besides, this isn't the problem in this case.
You are right, the problem isn't resolve.
Now I have RH9 (upgraded) with same kernel and gcc 3.2. (I have some
time thinking in upgrade, isn't a problem, BTW :)
>
> Did you load the pci64.bin firmware with maxiinit?
Maxinit don't have problems. When you release the firmware loader, I
haved 2 strange responses, but isis works. Now I have 0 strange responses.
Thank you again, Pieter.
Felipe.
PD: Other question: capture from your driver don't work because Maestro
driver from Alsa don't do it?
(Is this an extra problem for you?)
>
> Pieter
>
>
>
> Felipe Sologuren wrote:
>
> > I tried with both kernels and alsa recompiled.
> > I'll try tomorrow to install gcc 3.1 for testing.
> >
> > Thank you Pieter, your work is very usefull and important.
> >
> > Felipe
> >
> >------------------------------------------------------------------------
> >
> >Linux version 2.4.20-18.1.caps (ro...@cm...) (gcc version
> 2.96 20000731 (Red Hat Linux 7.2 2.96-112.7.2)) #1 Wed Jun 4 17:29:20
> PDT 2003
> >BIOS-provided physical RAM map:
> > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> > BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
> > BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
> > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> >0MB HIGHMEM available.
> >255MB LOWMEM available.
> >On node 0 totalpages: 65520
> >zone(0): 4096 pages.
> >zone(1): 61424 pages.
> >zone(2): 0 pages.
> >Kernel command line: ro root=/dev/hda2 hdd=ide-scsi
> >ide_setup: hdd=ide-scsi
> >Initializing CPU#0
> >Detected 950.024 MHz processor.
> >Console: colour VGA+ 80x25
> >Calibrating delay loop... 1893.99 BogoMIPS
> >Memory: 253312k/262080k available (1160k kernel code, 6336k reserved,
> 983k data, 120k init, 0k highmem)
> >Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
> >Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
> >Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> >Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
> >Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
> >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> >CPU: L2 Cache: 256K (64 bytes/line)
> >Intel machine check architecture supported.
> >Intel machine check reporting enabled on CPU#0.
> >CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
> >CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
> >CPU: AMD Athlon(tm) Processor stepping 02
> >Enabling fast FPU save and restore... done.
> >Checking 'hlt' instruction... OK.
> >POSIX conformance testing by UNIFIX
> >mtrr: v1.40 (20010327) Richard Gooch (rg...@at...)
> >mtrr: detected mtrr type: Intel
> >PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
> >PCI: Using configuration type 1
> >PCI: Probing PCI hardware
> >PCI: Using IRQ router default [1106/3074] at 00:11.0
> >isapnp: Scanning for PnP cards...
> >isapnp: No Plug & Play device found
> >Linux NET4.0 for Linux 2.4
> >Based upon Swansea University Computer Society NET3.039
> >Initializing RT netlink socket
> >apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
> >Starting kswapd
> >VFS: Disk quotas vdquot_6.5.1
> >pty: 2048 Unix98 ptys configured
> >Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
> SHARE_IRQ SERIAL_PCI ISAPNP enabled
> >Real Time Clock Driver v1.10e
> >Floppy drive(s): fd0 is 1.44M
> >FDC 0 is a post-1991 82077
> >NET4: Frame Diverter 0.46
> >RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> >Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
> >ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> >VP_IDE: IDE controller at PCI slot 00:11.1
> >VP_IDE: chipset revision 6
> >VP_IDE: not 100% native mode: will probe irqs later
> >VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
> > ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
> > ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
> >hda: MAXTOR 6L040J2, ATA DISK drive
> >blk: queue c0373d00, I/O limit 4095Mb (mask 0xffffffff)
> >hdc: QUANTUM FIREBALLlct10 10, ATA DISK drive
> >hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
> >blk: queue c0374164, I/O limit 4095Mb (mask 0xffffffff)
> >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >ide1 at 0x170-0x177,0x376 on irq 15
> >hda: attached ide-disk driver.
> >hda: host protected area => 1
> >hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=4866/255/63,
> UDMA(100)
> >hdc: attached ide-disk driver.
> >hdc: host protected area => 1
> >hdc: 20044080 sectors (10263 MB) w/418KiB Cache, CHS=19885/16/63
> >ide-floppy driver 0.99.newide
> >Partition check:
> > hda: hda1 hda2 hda3 hda4
> > hdc: [PTBL] [1247/255/63] hdc1
> >ide-floppy driver 0.99.newide
> >md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> >md: Autodetecting RAID arrays.
> >md: autorun ...
> >md: ... autorun DONE.
> >NET4: Linux TCP/IP 1.0 for NET4.0
> >IP Protocols: ICMP, UDP, TCP, IGMP
> >IP: routing cache hash table of 2048 buckets, 16Kbytes
> >TCP: Hash tables configured (established 16384 bind 32768)
> >Linux IP multicast router 0.06 plus PIM-SM
> >NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> >RAMDISK: Compressed image found at block 0
> >Freeing initrd memory: 120k freed
> >VFS: Mounted root (ext2 filesystem).
> >Journalled Block Device driver loaded
> >kjournald starting. Commit interval 5 seconds
> >EXT3-fs: mounted filesystem with ordered data mode.
> >Freeing unused kernel memory: 120k freed
> >Adding Swap: 522104k swap-space (priority -1)
> >EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
> >kjournald starting. Commit interval 5 seconds
> >EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
> >EXT3-fs: mounted filesystem with ordered data mode.
> >SCSI subsystem driver Revision: 1.00
> >hdd: attached ide-scsi driver.
> >scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> > Vendor: HL-DT-ST Model: CD-RW GCE-8400B Rev: 1.01
> > Type: CD-ROM ANSI SCSI revision: 02
> >hdd: DMA disabled
> >hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
> >hdd: drive_cmd: error=0x04
> >parport0: PC-style at 0x278 [PCSPP,TRISTATE,EPP]
> >dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
> >divert: allocating divert_blk for eth0
> >eth0: Davicom DM9102 at pci00:06.0, 00:80:ad:7a:03:17, irq 10.
> > isis: loading driver built on 21:04:13 Jul 27 2003
> >ALSA isis.c:2632: Entering ISIS create
> >ALSA isis.c:2822: isis: loading SAM driver
> >ALSA sam9407.c:27: sam9407: Creating chip
> >ALSA sam_pcm.c:937: creating 1/2 controls
> >ALSA sam_pcm.c:975: creating 3/4 controls
> >ALSA sam_ucode.c:324: new HWDEP
> >ALSA sam_mpu401.c:305: creating MIDI controls
> >ALSA sam9407.c:121: sam9407: Creating chip done
> >ALSA sam9407.c:154: sam9407: Init chip
> >ALSA sam_io.c:345: sam9407: command 0x3 ack timeout
> >ALSA sam_io.c:345: sam9407: command 0x2 ack timeout
> >ALSA sam_mem.c:128: sam9407: transfer 192 words from address 0x0 failed
> >ALSA isis.c:2215: isis: Error creating SAM chip
> >ALSA sam9407.c:327: sam9407: devfree chip
> >ALSA sam9407.c:285: sam9407: free chip
> >ALSA sam9407.c:268: sam9407: cleanup shadows
> >Maxi Studio ISIS soundcard not found or device busy
> >PCI: Setting latency timer of device 00:11.5 to 64
> >0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363
> Sat Apr 19 17:46:46 PDT 2003
> >Linux agpgart interface v0.99 (c) Jeff Hartmann
> >agpgart: Maximum main memory to use for agp memory: 203M
> >agpgart: Detected Via Apollo Pro KT266 chipset
> >agpgart: AGP aperture is 32M @ 0xe0000000
> >Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> >sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
> >Uniform CD-ROM driver Revision: 3.12
> >
> >
> >------------------------------------------------------------------------
> >
> >00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
> > Subsystem: VIA Technologies, Inc.: Unknown device 0000
> > Flags: bus master, medium devsel, latency 0
> > Memory at e0000000 (32-bit, prefetchable) [size=32M]
> > Capabilities: [a0] AGP version 2.0
> > Capabilities: [c0] Power Management version 2
> >
> >00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT333 AGP] (prog-if
> 00 [Normal decode])
> > Flags: bus master, 66Mhz, medium devsel, latency 0
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > Memory behind bridge: dde00000-dfefffff
> > Prefetchable memory behind bridge: d9c00000-ddcfffff
> > Capabilities: [80] Power Management version 2
> >
> >00:06.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet
> 100/10 MBit (rev 31)
> > Subsystem: Unknown device 3030:5032
> > Flags: bus master, medium devsel, latency 128, IRQ 10
> > I/O ports at ec00 [size=256]
> > Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
> > Expansion ROM at dff80000 [disabled] [size=256K]
> > Capabilities: [50] Power Management version 2
> >
> >00:07.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E
> (rev 10)
> > Subsystem: Guillemot Corporation: Unknown device 0010
> > Flags: bus master, medium devsel, latency 128, IRQ 9
> > I/O ports at e800 [size=256]
> > Capabilities: [c0] Power Management version 2
> >
> >00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
> > Subsystem: VIA Technologies, Inc.: Unknown device 0000
> > Flags: bus master, stepping, medium devsel, latency 0
> > Capabilities: [c0] Power Management version 2
> >
> >00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus
> Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
> > Subsystem: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
> > Flags: bus master, medium devsel, latency 32
> > I/O ports at fc00 [size=16]
> > Capabilities: [c0] Power Management version 2
> >
> >00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233
> AC97 Audio Controller (rev 10)
> > Subsystem: Avance Logic Inc.: Unknown device 4710
> > Flags: medium devsel, IRQ 9
> > I/O ports at e400 [size=256]
> > Capabilities: [c0] Power Management version 2
> >
> >01:00.0 VGA compatible controller: nVidia Corporation RIVA TNT2 Model
> 64 (rev 15) (prog-if 00 [VGA])
> > Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
> > Memory at de000000 (32-bit, non-prefetchable) [size=16M]
> > Memory at da000000 (32-bit, prefetchable) [size=32M]
> > Expansion ROM at dfef0000 [disabled] [size=64K]
> > Capabilities: [60] Power Management version 1
> > Capabilities: [44] AGP version 2.0
> >
> >
> >
>
>
>
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
> http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> _______________________________________________
> Isisalsa-devel mailing list
> Isi...@li...
> https://lists.sourceforge.net/lists/listinfo/isisalsa-devel
>
>
|
