Ok, after alot of investigation I've found where the problem
I spoke about in October this year originates...
found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
SMsC IrDA Controller found
IrCC version 2.0, firport 0x158, sirport 0x2f8 dma=1, irq=3
smsc_ircc_setup_io(), can't get iobase of 0x2f8
all i did above is build smsc-ircc2, modprobe irda, and
insmod smsc-ircc2. (enabling that line of debugging info)
it sems to detect the chip, but fails on that call.
could it be conflicting with the serial driver? any suggestions
would be very very appreciated. Today i bought myself a USB->IRDA
device (about $70USD) and found it was based on the sigmatel chipset
which isn't supported :(
Nigel Kukard (Chief Executive Officer)
Lando Technologies Africa (Pty) Ltd
Tel: 083 399 5822 Fax: 086 1100036
Hoheisen Park Bellville, Cape Town
National Internet Service Provider
The best language to use is the language that was designed for
what you want to use it for - 1997
The contents of this message and any attachments are intended
solely for the addressee's use and may be legally privileged and/or
confidential information. This message may not be retained,
distributed, copied or used if you are not he addressee of this
message. If this message was sent to you in error, please notify
the sender immediately by reply e-mail and then destroy the message
and any copies thereof.
Opinions, conclusions and other information in this message may be
personal to the sender and is not that of Lando Technologies Africa
or any of it's subsideries, associated companies or principals and
is therefore not endorsed by any of the Lando groups of companies.
Due to e-maill communication being insecure, Lando groups of
companies do not guarantee confidentiality, security, accuracy or
performance of the e-mail. Any liability for viruses is excluded
to the fullest extent.
Get latest updates about Open Source Projects, Conferences and News.