[IRC-Dev CVS] [CVS] Module ircd-ircdev: Change committed
Brought to you by:
zolty
Menu
▾
▴
[IRC-Dev CVS] [CVS] Module ircd-ircdev: Change committed
|
From: Toni G. <zo...@us...> - 2004-05-28 09:53:13
|
CVSROOT : /cvsroot/irc-dev
Module : ircd-ircdev
Commit time: 2004-05-28 09:53:06 UTC
Modified files:
doc/ircd.sample-en.conf
Log message:
Actualizacion ircd.conf en ingles
---------------------- diff included ----------------------
Index: ircd-ircdev/doc/ircd.sample-en.conf
diff -u ircd-ircdev/doc/ircd.sample-en.conf:1.4 ircd-ircdev/doc/ircd.sample-en.conf:1.5
--- ircd-ircdev/doc/ircd.sample-en.conf:1.4 Fri May 21 09:21:23 2004
+++ ircd-ircdev/doc/ircd.sample-en.conf Fri May 28 02:52:55 2004
@@ -1,6 +1,6 @@
# ircd.conf - configuration file for IRC-Dev's IRCD.
#
-# Last Updated: 21, May 2004.
+# Last Updated: 28, May 2004.
#
# Written by Niels <ni...@un...>, based on the original example.conf,
# server code and some real-life (ahem) experience.
@@ -40,9 +40,9 @@
# There is a difference between the "hostname" and the "server name"
# of the machine that the server is run on. For example, the host can
# have "83.Red-80-59-255.pooles.rima-tde.net" as FQDN, and
-# "zoltan.irc-dev.net" as server name.
+# "gmsis.irc-dev.net" as server name.
# A "server mask" is something like "*.EU.irc-dev.net", which is
-# matched by "Vigo.ES.EU.irc-dev.net" but not by "Porto.PT.US.irc-dev.net".
+# matched by "Vigo.ES.EU.irc-dev.net" but not by "Miami.FL.US.irc-dev.net".
#
# Please do NOT just rename the ircd.sample-en.conf to ircd.conf and expect
# it to work.
@@ -58,15 +58,15 @@
# numeric = numericnumber;
# };
#
-# <virtual host> must contain either a * or a valid IPv4 address in
+# The "vhost" field must contain either a * or a valid IPv4 address in
# dotted quad notation. (127.0.0.1) The address MUST be the address
# of a physical interface on the host. This address is used for outgoing
-# connections only, see Port{} for listener virtual hosting.
+# connections only, see "Port" block for listener virtual hosting.
# If in doubt put a * or the IP of your primary interface here.
# The server must be compiled with virtual hosting turned on to get this
# to work correctly.
#
-# Note that <server numeric> has to be unique on the network your server
+# Note that "numeric" field has to be unique on the network your server
# is running on, must be between 0 and 4095, and is not updated on a rehash.
General {
name = "gmsis.irc-dev.net";
@@ -102,10 +102,10 @@
# usermode = "+i";
# };
#
-# <connect freq> applies only to servers, and specifies the frequency
-# that the server tries to autoconnect. setting this to 0 will cause
-# the server to attempt to connect repeatedly with no delay until the
-# <maximum links> condition is satisfied. This is a Bad Thing(tm).
+# The "connectfreq" field applies only to servers, and specifies the
+# frequency that the server tries to autoconnect. setting this to 0 will
+# cause the server to attempt to connect repeatedly with no delay until the
+# "maxlinks" condition is satisfied. This is a Bad Thing(tm).
# Note that times can be specified as a number, or by giving something
# like: 1 minutes 20 seconds, or 1*60+20.
# Client {
@@ -115,7 +115,7 @@
# class = "classname";
# };
#
-# <maximum links> should be set at either 0 or 1.
+# The "maxlinks" field should be set at either 0 or 1.
#
# Recommended server classes:
# All your server uplinks you are not a hub for.
@@ -218,8 +218,8 @@
# To allow clients to connect, they need authorization. This can be
# done based on hostmask, address mask, and/or with a password.
# With intelligent use of classes and the maxconnections field in the
-# Client blocks, you can let in a specific domain, but get rid of all other
-# domains in the same toplevel, thus setting up some sort of "reverse
+# "Client" blocks, you can let in a specific domain, but get rid of all
+# other domains in the same toplevel, thus setting up some sort of "reverse
# Kill block".
# Client {
# host = "user@host";
@@ -232,7 +232,9 @@
# For every connecting client, the IP address is known. A reverse lookup
# on this IP-number is done to get the (/all) hostname(s).
# Each hostname that belongs to this IP-number is matched to <hostmask>,
-# and the Client {} is used when any matches; the client will then show
+# and the "Client" block is used when any matches; the client will then
+show
+FIX FIX
# with this particular hostname. If none of the hostnames match, then
# the IP-number is matched against the <IP mask ...> field, if this matches
# then the Client{} is used nevertheless and the client will show with the
@@ -339,7 +341,7 @@
};
-# [motd]
+# [Motd]
#
# It is possible to show a different Message of the Day to a connecting
# client depending on its origin.
@@ -350,26 +352,26 @@
# };
#
# DPATH/net_com.motd contains a special MOTD where users are encouraged
-# to register their domains and get their own client{} lines if they're in
+# to register their domains and get their own "Client" blocks if they're in
# Europe, or move to US.irc-dev.net if they're in the USA.
-motd {
+Motd {
host = "*.net";
file = "net_com.motd";
};
-motd {
+Motd {
host = "*.com";
file = "net_com.motd";
};
-motd {
+Motd {
host = "Telefonica";
file = "telefonica.motd";
};
# A different MOTD for ourselves, where we point out that the helpdesk
# better not be bothered with questions regarding irc...
-motd {
- host = "*.london.ac.uk";
- file = "london.motd";
+Motd {
+ host = "*.irc-dev.net";
+ file = "irc-dev.motd";
};
# [Server]
@@ -493,7 +495,7 @@
# The realname field lets you ban by realname...
Kill
{
- host = "*sub7*";
+ realname = "*sub7*";
reason = "You are infected with a Trojan";
};
@@ -510,7 +512,7 @@
# server links is provided for ircd to decide what links to allow, what
# to let humans do themselves, and what links to (forcefully) disallow.
#
-# The Connect blocks
+# The "Connect" blocks
# define what servers the server connect to, and which servers are
# allowed to connect.
# Connect {
@@ -524,11 +526,11 @@
# The "port" field defines the default port the server tries to connect
# to if an operator uses /connect without specifying a port. This is also
# the port used when the server attempts to auto-connect to the remote
-# server. (See Class blocks for more informationa about auto-connects).
+# server. (See "Class" blocks for more informationa about auto-connects).
#
# Our primary uplink.
Connect {
- name = "gmsis.irc-dev.net";
+ name = "devel.irc-dev.net";
host = "1.2.3.4";
password = "passwd";
port = 4400;
@@ -536,11 +538,11 @@
};
-# [crule]
+# [Crule]
#
# For an advanced, real-time rule-based routing decision making system
-# you can use crule blocks. For more information, see doc/readme.crules.
-# CRULE
+# you can use "Crule" blocks. For more information, see doc/*/crules.txt.
+# Crule
# {
# server = "servermask";
# rule = "connectrule";
@@ -548,19 +550,19 @@
# # applies to autoconnects.
# all = yes;
# };
-CRULE
+Crule
{
server = "*.US.irc-dev.net";
rule = "connected(*.US.irc-dev.net)";
};
-CRULE
+Crule
{
server = "*.EU.irc-dev.net";
rule = "connected(Vigo.ES.EU.*)";
};
# The following block is recommended for leaf servers:
-CRULE
+Crule
{
server = "*";
rule = "directcon(*)";
@@ -587,7 +589,7 @@
# name = "opername";
# password = "encryptedpass";
# class = "classname";
-# # You can also set any operator privilege; see the Class block
+# # You can also set any operator privilege; see the "Class" block
# # documentation for details. A privilege defined for a single
# # Operator will override the privilege settings for the Class
# # and the default setting.
@@ -614,15 +616,15 @@
class = "Opers";
};
-# Note that the <connection class> is optional, but leaving it away
-# puts the opers in class "default", which usually only accepts one
-# connection at a time. If you want users to Oper up more then once per
-# block, then use a connection class that allows more then one connection,
-# for example (using class Local as in the example above):
+# Note that the "class" field is optional, but leaving it away puts the
+# opers in class "default", which usually only accepts one connection at
+# a time. If you want users to Oper up more then once per block, then use
+# a connection class that allows more then one connection, for example
+# (using class Local as in the example above):
#
# Once you OPER your connection class changes no matter where you are or
# your previous connection classes. If the defined connection class is
-# Local for the operator block, then your new connection class is Local.
+# Local for the "Operator" block, then your new connection class is Local.
# [Port]
# When your server gets more full, you will notice delays when trying to
@@ -704,12 +706,12 @@
nick = "X...@ch...";
};
-# [features]
+# [Features]
# IRC servers have a large number of options and features. Most of these
# are set at compile time through the use of #define's--see "make config"
# for more details--but we are working to move many of these into the
# configuration file. Features let you configure these at runtime.
-# You only need one feature block in which you use
+# You only need one "features" block in which you use
# "featurename" = "value1" , "value2", ..., "valuen-1", "valuen";
#
# The entire purpose of F:lines are so that you do not have to recompile
@@ -720,7 +722,7 @@
# be found at doc/*/features.txt and the logging documentation can be found
# at doc/*/log.txt. The defaults used by the IRC-Dev.Net network are below.
#
-features
+Features
{
# "LOG" = "SYSTEM:FILE:ircd.log";
# "LOG" = "SYSTEM:LEVEL:CRIT";
@@ -838,7 +840,7 @@
# Well, you have now reached the end of this sample configuration
# file. If you have any questions, visit http://www.irc-dev.net,
-# or join the channel #irc-dev at IRC-Hispano or Undernet, and feel :-)
+# or join the channel #irc-dev at Undernet, and feel :-)
#
# Upgrades of the ircd can be found via CVS or download on
# http://www.irc-dev.net
----------------------- End of diff -----------------------
|
