ipsec update error updating remote gateway

[deville]

I use monowall 1.23, windows xp sp3 with xampp

I setup the ipsecupdate as below:

/**********************************************************************/
//Adjust these settings
$hostname = 'willstrong.com';
$filename = 'd:\php\ipsecUpdate.dat';
$monowall_hostname = '192.168.1.254';
$monowall_username = 'admin';
$monowall_password = 'mono';
/***********************************************************************/

    /*****************************************************************************************/
    //Adjust the lines below to match your settings
    $postArray = array (
         'interface' => 'wan',
         'localnettype' => 'lan',
//??         'localnet' => 'lan',
         'remotenet' => '192.168.18.0',
         'remotebits' => '24',
         'remotegw' => $newIPAddress,
         'descr' => 'dynamic ip',
         'p1mode' => 'aggressive',
         'p1myidentt' => 'user_fqdn',
         'p1myident' => 'vpn@sunlick.com',
         'p1ealgo' => 'blowfish',
         'p1halgo' => 'hmac_md5',
         'p1dhgroup' => '2',
         'p1lifetime' => '86400',
         'p1authentication_method' => 'pre_shared_key',
         'p1pskey' => '31046289',
         'p2proto' => 'esp',
         'p2ealgos' => array ( 0 => '3des', 1 => 'blowfish', ),
         'p2halgos' => array ( 0 => 'hmac_md5', ),
         'p2pfsgroup' => '0',
         'p2lifetime' => '86400',
         'Submit' => 'Save',
         'id' => '5',
     );
     /****************************************************************************************/

I run the php under command window : c:\xampp\php\php d:\php\ipsecupdate.php.

The ipsecupdate.dat created and the dynamic address is detected,
but I get "Error updating remote gateway" everytime, even I use the original seeting from download.

anything wrong, please help !!

[hulk]

Hi, I am not sure if the project is dead or......

I have got the similar error and the post data I received was "Bad request token. Please make sure cookies are enabled and try again"

I googled the error message and found since 1.34, The CSRF magic token that has been introduced......

Thanks Regards RW