Red Hat Linux
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
You seem to have CSS turned off.
Please don't fill out this field.
Briefly describe the problem (required):
Please provide the ad click URL, if possible:
Hi, i have some problem about setkey.
if i have the following scenario:
pc-alice=========Gatway moon==================Gatway sun=========pc-bob
10.1.0.1 eth0 eth1 eth0 eth1 10.2.0.10
10.1.0.1 184.108.40.206 220.127.116.11 10.2.0.1
step1 i run strongswan to build ipsec tunnel from alice to sun
and alice can ping bob under ipsec protect.
step2 i use setkey -D and setkey -DP to dump spd entries and sad entries
step3 flush spd and sad
step4 i want using setkey to build the same ipsec tunnel.
i find that the packet without send to bob.
an interesting thing is that before step4 if i first start
strongswan(without build any connect) and
there are some per-socket policy in spd and step4 will success
so i have some question about that how to set per-sock policy to SPD
just like strongswan do by using setkey??
Could anyone point me in the right direction, thanks
ps. the following are result of step2 and setkey instruction
alice setkey -D --> http://is.cs.nthu.edu.tw/~ckshjerho/alice/sad.txt
setkey -DP -> http://is.cs.nthu.edu.tw/~ckshjerho/alice/spd.txt
sun setkey -D --> http://is.cs.nthu.edu.tw/~ckshjerho/sun/sad.txt
setkey -DP -> http://is.cs.nthu.edu.tw/~ckshjerho/sun/spd.txt
step4 setkey command