From: Jonathan C. R. <jon...@ba...> - 2004-03-29 21:21:43
|
Hi All, I'm in a similar spot to Mathieu, perhaps a little further. I just managed to compile a 2.4.24 UP kernel with the old 2.4.20 eth1394 driver (I can verify the SMP / eth1394 driver problem! Total system hang as soon as the module is inserted!) I can now ping my ipod. Yay! I had to unplug my crossfire firewire drive first though, presumably to make sure the ipod was node [1]. The telnetd daemon on the iPod doesn't seem to want to bind to port 25. I tried running it from inittab and from the shell (with the cunningly wired shell script 'f'.) I _think_ I saw something about all ports being in use? Is any other configuration needed on the iPod other than inserting the two modules and configuring ethernet? Thanks for any advice, Jonathan. On Mon, 2004-03-29 at 22:11, Bernard Leach wrote: > Some random thoughts/questions: > > Are there errors on the iPod during boot? > > If you start podzilla from /etc/rc, you need to exit podzilla before you > can use telnet (although ping should work). > > You need to modprobe the eth1394 driver on your pc with the iPod > connected (or at least stop and restart it if you disconnect the iPod). > > On Mon, 2004-03-29 at 21:08, Mathieu wrote: > > Hi everybody ! > > I have successfully compiled the 2.6.4 kernel for my computer and I > > have addded the ipodeth1394 driver on the CVS server but I cannot ping > > the ipod it doesn't work ! > > Any ide will be aprecied ! > > > > Thank you > > CHeers, > > Mathieu > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > iPodlinux-devel mailing list > iPo...@li... > https://lists.sourceforge.net/lists/listinfo/ipodlinux-devel |