#40 iperf 3.1.5 not showing server summary for UDP

[Kevin White]

Server running on Android:
iperf3-arm --server --bind 192.168.1.6 --port 5001 --interval 1 -f k

Summary is 0
[ 6] 9.00-10.00 sec 5.51 MBytes 46225 Kbits/sec 0.071 ms 250/4239 (5.9%)
[ 6] 10.00-10.02 sec 105 KBytes 36572 Kbits/sec 0.112 ms 0/74 (0%)

---

[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 6] 0.00-10.02 sec 0.00 Bytes 0.00 Kbits/sec 0.112 ms 2117/42753 (5%)

Client running on Linux:
iperf3-x86 --client 192.168.1.6 --time 10 --bind 192.168.1.8 --port 5001 --interval 1 --parallel 1 --udp --bandwidth 50M -f k

Shows good summary:
[ 4] 8.00-9.00 sec 5.96 MBytes 49976 Kbits/sec 4315
[ 4] 9.00-10.00 sec 5.96 MBytes 49972 Kbits/sec 4313

---

[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-10.00 sec 59.0 MBytes 49524 Kbits/sec 0.112 ms 2117/42753 (5%)
[ 4] Sent 42753 datagrams

Any idea why the server summary is 0?