[IPCop-cvs] ipcop/src/patches mii-diag.multi-line-string.patch,NONE,1.1.2.1

[Gilles E. <ges...@us...>]

Update of /cvsroot/ipcop/ipcop/src/patches
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv14261/src/patches

Added Files:
      Tag: IPCOP_v1_4_0
	mii-diag.multi-line-string.patch 
Log Message:
Add mii-diag to allow ethernet link speed setup on most of pci cards when autonegociation had failed

--- NEW FILE: mii-diag.multi-line-string.patch ---
--- mii-diag_old.c	Sat Jul 10 14:39:10 2004
+++ mii-diag.c	Sat Jul 10 14:39:38 2004
@@ -37,46 +37,45 @@
 static const char usage_msg[] =
 "Usage: %s [--help] [-aDfrRvVw] [-AF <speed+duplex>] [--watch] <interface>.\n";
 static const char long_usage_msg[] =
-"Usage: %s [-aDfrRvVw] [-AF <speed+duplex>] [--watch] <interface>.
-
-  This program configures and monitors the transceiver management registers
-  for network interfaces.  It uses the Media Independent Interface (MII)
-  standard with additional Linux-specific controls to communicate with the
-  underlying device driver.  The MII registers control and report network
-  link settings and errors.  Examples are link speed, duplex, capabilities
-  advertised to the link partner, status LED indications and link error
-  counters.
-
-   The common usage is
-      mii-diag eth0
-
-   The default interface is \"eth0\".
- Frequently used options are
-   -A  --advertise <speed|setting>
-   -F  --fixed-speed <speed>
-	Speed is one of: 100baseT4, 100baseTx, 100baseTx-FD, 100baseTx-HD,
-	                 10baseT, 10baseT-FD, 10baseT-HD
-   -s  --status     Return exit status 2 if there is no link beat.
-
- Less frequently used options are
-   -a  --all-interfaces  Show the status all interfaces
-              (Not recommended with options that change settings.)
-   -D  --debug
-   -g  --read-parameters 	Get driver-specific parameters.
-   -G  --set-parameters PARMS	Set driver-specific parameters.
-       Parameters are comma separated, missing elements retain existing value.
-   -M  --msg-level LEVEL 	Set the driver message bit map.
-   -p  --phy ADDR		Set the PHY (MII address) to report.
-   -r  --restart	Restart the link autonegotiation.
-   -R  --reset		Reset the transceiver.
-   -v  --verbose	Report each action taken.
-   -V  --version	Emit version information.
-   -w  --watch		Continuously monitor the transceiver and report changes.
-
-   This command returns success (zero) if the interface information can be
-   read.  If the --status option is passed, a zero return means that the
-   interface has link beat.
-";
+"Usage: %s [-aDfrRvVw] [-AF <speed+duplex>] [--watch] <interface>.\n"
+"\n"
+"  This program configures and monitors the transceiver management registers\n"
+"  for network interfaces.  It uses the Media Independent Interface (MII)\n"
+"  standard with additional Linux-specific controls to communicate with the\n"
+"  underlying device driver.  The MII registers control and report network\n"
+"  link settings and errors.  Examples are link speed, duplex, capabilities\n"
+"  advertised to the link partner, status LED indications and link error\n"
+"  counters.\n"
+"\n"
+"   The common usage is\n"
+"      mii-diag eth0\n"
+"\n"
+"   The default interface is \"eth0\".\n"
+" Frequently used options are\n"
+"   -A  --advertise <speed|setting>\n"
+"   -F  --fixed-speed <speed>\n"
+"	Speed is one of: 100baseT4, 100baseTx, 100baseTx-FD, 100baseTx-HD,\n"
+"	                 10baseT, 10baseT-FD, 10baseT-HD\n"
+"   -s  --status     Return exit status 2 if there is no link beat.\n"
+"\n"
+" Less frequently used options are\n"
+"   -a  --all-interfaces  Show the status all interfaces\n"
+"              (Not recommended with options that change settings.)\n"
+"   -D  --debug\n"
+"   -g  --read-parameters 	Get driver-specific parameters.\n"
+"   -G  --set-parameters PARMS	Set driver-specific parameters.\n"
+"       Parameters are comma separated, missing elements retain existing value.\n"
+"   -M  --msg-level LEVEL 	Set the driver message bit map.\n"
+"   -p  --phy ADDR		Set the PHY (MII address) to report.\n"
+"   -r  --restart	Restart the link autonegotiation.\n"
+"   -R  --reset		Reset the transceiver.\n"
+"   -v  --verbose	Report each action taken.\n"
+"   -V  --version	Emit version information.\n"
+"   -w  --watch		Continuously monitor the transceiver and report changes.\n"
+"\n"
+"   This command returns success (zero) if the interface information can be\n"
+"   read.  If the --status option is passed, a zero return means that the\n"
+"   interface has link beat.\n";
 
 #include <unistd.h>
 #include <stdlib.h>