Darren - 2008-05-18

Hi,

does infrarecorder support dual layer 8.5gb DVDs?

i tried burning a 2.5gb dmg file to a dvd+r 8.5gb and got the error below

os is windows vista x64, 4gb ram
infrarecorder 0.45.0.0

the interesting bit i think is
"Waiting for reader process to fill input buffer ... /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Layer 0 size 2086912 is bigger than expected disk size 1364352."

seems it may be reading the two layers as one and then failing?

Opened device 'E' using SPTI.
Error: SCSI command failed, returned: 0x02.
CDB: 0xAD,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x08,0x00,0x00
Sense: 0x70,0x00,0x05,0x00,0x00,0x00,0x00,0x0A
0x00,0x00,0x00,0x00,0x24,0x00,0x00,0x00
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
CCore2Info::GetTotalDiscCapacity
Current profile: 0x002B.
Capacity list length: 8 bytes.
Opened device 'E' using SPTI.
Opened device 'E' using SPTI.
CDiscImageWriter::Create
Sector offset: 0.
Allocated directory entries 2 sectors.
CCore::BurnTracks
[0,0,0] TSSTcorp CD/DVDW SH-W163A TS01
File = C:\Users\Darren\AppData\Local\Temp\irIBA62.tmp.
Eject = 0, Simulate = 0, BUP = 1, Pad tracks = 1, Fixate = 1, Method = 0, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Mode = 0.
CConsolePipe::Launch
CConsolePipe::CreateProcess
Command line = "C:\Program Files\InfraRecorder\cdrtools\cdrecord.exe" -v dev=0,0,0 gracetime=5 -sao driveropts=burnfree -pad -data "/cygdrive/C/Users/Darren/AppData/Local/Temp/irIBA62.tmp".
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> SCSI buffer size: 64512
> Cdrecord-ProDVD-ProBD-Clone 2.01.01a38 (i686-pc-cygwin) Copyright (C) 1995-2008 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.9'.
> Driveropts: 'burnfree'
> atapi: -1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'TSSTcorp'
> Identifikation : 'CD/DVDW SH-W163A'
> Revision : 'TS01'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD+R/DL
> Profile: DVD-R/DL sequential recording
> Profile: DVD-R/DL layer jump recording
> Profile: DVD+R/DL (current)
> Profile: DVD+R
> Profile: DVD+RW
> Profile: DVD-RW sequential recording
> Profile: DVD-RW restricted overwrite
> Profile: DVD-R sequential recording
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
> Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 1048576 = 1024 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 2664 MB padsize: 30 KB
> Total size: 2664 MB = 1364344 sectors
> Current Secsize: 2048
> Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 2809480
> Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
> Last chance to quit, starting real write in 5 seconds
> Operation starts.
> Waiting for reader process to fill input buffer ... /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Layer 0 size 2086912 is bigger than expected disk size 1364352.
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Use single layer medium.
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Cannot open next track.
> input buffer ready.
> Writing time: 0.023s
> Average write speed 999.0x.
> Fixating...
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Input/Output error. close track/session: scsi sendcmd: no error
> CDB: 5B 01 06 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.002s timeout 1000s
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Input/Output error. close track/session: scsi sendcmd: no error
> CDB: 5B 01 06 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.002s timeout 1000s
> cmd finished after 0.002s timeout 1000s
> Trouble closing the last session
> Fixating time: 0.009s
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: fifo had 64 puts and 0 gets.
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100
> BURN-Free was 1 times used.
CCore::ProcessEnded

device scan shows
CDiagnostics::DeviceScan
CConsolePipe::Launch
CConsolePipe::CreateProcess
Command line = "C:\Program Files\InfraRecorder\cdrtools\cdrecord.exe" -scanbus.
> Cdrecord-ProDVD-ProBD-Clone 2.01.01a38 (i686-pc-cygwin) Copyright (C) 1995-2008 Jörg Schilling
> Using libscg version 'schily-0.9'.
> scsibus0:
> 0,0,0 0) 'TSSTcorp' 'CD/DVDW SH-W163A' 'TS01' Removable CD-ROM
> 0,1,0 1)
> 0,2,0 2)

> 0,3,0 3)
> 0,4,0 4)

> 0,5,0 5)
> 0,6,0 6)

> 0,7,0 7) HOST ADAPTOR
CDiagnostics::ProcessEnded