Had a perfectly running setup for quite a while and once I upgraded my sound card, I'm not getting any sound through my headphones or speakers. Can see soundlevels as I play music and when I record I can hear everything in the playback but I'm not getting any audio at all in IDJC. What am I missing?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The sound could be going to your on board audio. Install and run the program called qjackctl.
Select Setup, then choose the input device and output device. Hit the save button then exit the program.
If that doesn't work inside IDJC in the JACK Ports menu select Reset.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have directed output to my appropriate soundcard in qjackctl, I've reset the ports in IDJC, still nothing.
If it helps at all, I disabled my onboard audio in the BIOS and installed an Audigy RX. I have a Yeti Blue USB mic that also shows up as a sound card. Yeti is set up as the input in jack and I can see it working in the channel 1 meter. I've plugged my headphones into the jack in the mic to see if by any chance it was going there and still nothing. Output in qjackctl is pointing at the Audigy, there are a few entries for it there and I've tried them all with the same results.
I never thought to try plugging into my onboard for some reason, I'll try that this evening when I get home from work.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I've set output to every different option listed in qjackctl, plugged my headphones into every jack on every soundcard on the system. Reset ports in IDJC. Still nothing through the headphones. Is there somewhere I can look to see where the output is being routed?
I am getting some errors in the qjackctl messages console. Would that be helpful?
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pl_out_l' to 'idjc_default:pl_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pl_out_r' to 'idjc_default:pl_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 24 port_dst = 34
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 25 port_dst = 35
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pr_out_l' to 'idjc_default:pr_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pr_out_r' to 'idjc_default:pr_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 26 port_dst = 36
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 27 port_dst = 37
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pi_out_l' to 'idjc_default:pi_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pi_out_r' to 'idjc_default:pi_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 28 port_dst = 38
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 29 port_dst = 39
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe01-12_out_l' to 'idjc_default:pe_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe01-12_out_r' to 'idjc_default:pe_in_r'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe13-24_out_l' to 'idjc_default:pe_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe13-24_out_r' to 'idjc_default:pe_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 30 port_dst = 40
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 32 port_dst = 40
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 31 port_dst = 41
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 33 port_dst = 41
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dsp_out_l' to 'jamin:in_L'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dsp_out_r' to 'jamin:in_R'
Mon Oct 10 20:37:52 2016: Connecting 'jamin:out_L' to 'idjc_default:dsp_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'jamin:out_R' to 'idjc_default:dsp_in_r'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dj_out_l' to 'system:playback_1'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dj_out_r' to 'system:playback_2'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:str_out_l' to 'idjc_default:output_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:str_out_r' to 'idjc_default:output_in_r'
Mon Oct 10 20:37:52 2016: Connecting 'system:capture_1' to 'idjc_default:ch_in_1'
Mon Oct 10 20:37:52 2016: Connecting 'system:capture_2' to 'idjc_default:ch_in_2'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 17 port_dst = 43
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 18 port_dst = 44
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:alarm_out' to 'system:playback_1'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:alarm_out' to 'system:playback_2'
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Had a perfectly running setup for quite a while and once I upgraded my sound card, I'm not getting any sound through my headphones or speakers. Can see soundlevels as I play music and when I record I can hear everything in the playback but I'm not getting any audio at all in IDJC. What am I missing?
The sound could be going to your on board audio. Install and run the program called qjackctl.
Select Setup, then choose the input device and output device. Hit the save button then exit the program.
If that doesn't work inside IDJC in the JACK Ports menu select Reset.
I have directed output to my appropriate soundcard in qjackctl, I've reset the ports in IDJC, still nothing.
If it helps at all, I disabled my onboard audio in the BIOS and installed an Audigy RX. I have a Yeti Blue USB mic that also shows up as a sound card. Yeti is set up as the input in jack and I can see it working in the channel 1 meter. I've plugged my headphones into the jack in the mic to see if by any chance it was going there and still nothing. Output in qjackctl is pointing at the Audigy, there are a few entries for it there and I've tried them all with the same results.
I never thought to try plugging into my onboard for some reason, I'll try that this evening when I get home from work.
I've set output to every different option listed in qjackctl, plugged my headphones into every jack on every soundcard on the system. Reset ports in IDJC. Still nothing through the headphones. Is there somewhere I can look to see where the output is being routed?
I am getting some errors in the qjackctl messages console. Would that be helpful?
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pl_out_l' to 'idjc_default:pl_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pl_out_r' to 'idjc_default:pl_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 24 port_dst = 34
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 25 port_dst = 35
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pr_out_l' to 'idjc_default:pr_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pr_out_r' to 'idjc_default:pr_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 26 port_dst = 36
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 27 port_dst = 37
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pi_out_l' to 'idjc_default:pi_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pi_out_r' to 'idjc_default:pi_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 28 port_dst = 38
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 29 port_dst = 39
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe01-12_out_l' to 'idjc_default:pe_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe01-12_out_r' to 'idjc_default:pe_in_r'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe13-24_out_l' to 'idjc_default:pe_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:pe13-24_out_r' to 'idjc_default:pe_in_r'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 30 port_dst = 40
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 32 port_dst = 40
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 31 port_dst = 41
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 33 port_dst = 41
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dsp_out_l' to 'jamin:in_L'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dsp_out_r' to 'jamin:in_R'
Mon Oct 10 20:37:52 2016: Connecting 'jamin:out_L' to 'idjc_default:dsp_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'jamin:out_R' to 'idjc_default:dsp_in_r'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dj_out_l' to 'system:playback_1'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:dj_out_r' to 'system:playback_2'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:str_out_l' to 'idjc_default:output_in_l'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:str_out_r' to 'idjc_default:output_in_r'
Mon Oct 10 20:37:52 2016: Connecting 'system:capture_1' to 'idjc_default:ch_in_1'
Mon Oct 10 20:37:52 2016: Connecting 'system:capture_2' to 'idjc_default:ch_in_2'
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 17 port_dst = 43
Mon Oct 10 20:37:52 2016: ERROR: JackGraphManager::Connect already connected port_src = 18 port_dst = 44
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:alarm_out' to 'system:playback_1'
Mon Oct 10 20:37:52 2016: Connecting 'idjc_default:alarm_out' to 'system:playback_2'