|
From: Rafael J. W. <rj...@rj...> - 2020-05-18 10:53:36
|
On Friday, May 15, 2020 11:41:16 PM CEST Andy Shevchenko wrote: > +Cc: ACPI ML and Rafael +Cc: David Box > On Fri, May 15, 2020 at 8:36 PM la...@ap... <la...@ap...> wrote: > > > > Hi. I hope this is the right forum to raise this... > > > > For a while I have noticed that my CPU (i9-9880H in a Lenovo X1 Extreme Gen2) never enters any sleep mode below pc2. > > (Confirmed with powertop and /sys/kernel/debug/pmc_core/package_cstate_show) > > > > Interestingly the CPU *can* reachers deeper C states *after* a resume from sleep (either S0ix or S3, i.e. freeze or mem). > > > > This article finally pointed me in the right direction: https://01.org/blogs/qwang59/2020/linux-s0ix-troubleshooting > > > > Somehow SOUTHPORT_A is requesting a max latency of 1 us. > > There are no external devices attached. > > > > This is before a resume: > > > > $ cat /sys/kernel/debug/pmc_core/ltr_show > > SOUTHPORT_A LTR: RAW: 0x88018c01 Non-Snoop(ns): 1024 Snoop(ns): 32768 <------- > > SOUTHPORT_B LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SATA LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > GIGABIT_ETHERNET LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > XHCI LTR: RAW: 0x13ff Non-Snoop(ns): 0 Snoop(ns): 0 > > Reserved LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > ME LTR: RAW: 0x8000800 Non-Snoop(ns): 0 Snoop(ns): 0 > > EVA LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SOUTHPORT_C LTR: RAW: 0x9f409f4 Non-Snoop(ns): 0 Snoop(ns): 0 > > HD_AUDIO LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > CNV LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > LPSS LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SOUTHPORT_D LTR: RAW: 0x8c548c54 Non-Snoop(ns): 2752512 Snoop(ns): 2752512 > > SOUTHPORT_E LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > CAMERA LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > ESPI LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SCC LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > ISH LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > UFSX2 LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > EMMC LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > WIGIG LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > CURRENT_PLATFORM LTR: RAW: 0x40201 Non-Snoop(ns): 0 Snoop(ns): 0 > > AGGREGATED_SYSTEM LTR: RAW: 0x7fbfdfe Non-Snoop(ns): 0 Snoop(ns): 0 > > > > Notice the 1000ns max latency requirement for SOUTHPORT_A. > > > > Ignoring SOUTHPORT_A via /sys/kernel/debug/pmc_core/ltr_ignore subsequently allows the CPU to reach deep sleep states. > > > > After a resume it looks like suddenly SOUTHPORT_C is active and with a less tight latency requirement: > > > > $ cat /sys/kernel/debug/pmc_core/ltr_show > > SOUTHPORT_A LTR: RAW: 0x8010c01 Non-Snoop(ns): 0 Snoop(ns): 0 <-------- > > SOUTHPORT_B LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SATA LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > GIGABIT_ETHERNET LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > XHCI LTR: RAW: 0x13ff Non-Snoop(ns): 0 Snoop(ns): 0 > > Reserved LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > ME LTR: RAW: 0x8000800 Non-Snoop(ns): 0 Snoop(ns): 0 > > EVA LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SOUTHPORT_C LTR: RAW: 0x88468846 Non-Snoop(ns): 71680 Snoop(ns): 71680 <--------- > > HD_AUDIO LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > CNV LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > LPSS LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SOUTHPORT_D LTR: RAW: 0x8c548c54 Non-Snoop(ns): 2752512 Snoop(ns): 2752512 > > SOUTHPORT_E LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > CAMERA LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > ESPI LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > SCC LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > ISH LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > UFSX2 LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > EMMC LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > WIGIG LTR: RAW: 0x0 Non-Snoop(ns): 0 Snoop(ns): 0 > > CURRENT_PLATFORM LTR: RAW: 0x40201 Non-Snoop(ns): 0 Snoop(ns): 0 > > AGGREGATED_SYSTEM LTR: RAW: 0x904824 Non-Snoop(ns): 0 Snoop(ns): 0 > > > > Does anybody know what's going on or how to debug this further? > > > > As stated above, I was able to work around this problem by ignoring SOUTHPORT_A via /sys/kernel/debug/pmc_core/ltr_ignore. > > There has to be a better way, and I'm sure I'm not the only one running into this. > > > > Thanks. > > > > -- Lars > > > > |
