|
From: Andy S. <and...@gm...> - 2020-04-24 09:59:44
|
On Fri, Apr 24, 2020 at 12:57 AM Lars <la...@ap...> wrote: > > This adds dual fan control for the following models: > P50, P51, P52, P70, P71, P72, P1 gen1, X1E gen1, P2 gen2, and X1E gen2. > > Both fans are controlled together as if they were a single fan. > > Tested on an X1 Extreme Gen1, an X1 Extreme Gen2, and a P50. > > The patch is defensive, it adds only specific supported machines, and falls > back to the old behavior if both fans cannot be controlled. > > Background: > I tested the BIOS default behavior on my X1E gen2 and both fans are always > changed together. So rather than adding controls for each fan, this controls > both fans together as the BIOS would do. > > This was inspired by a discussion on dual fan support for the thinkfan tool > [1]. > All BIOS ids are taken from there. The X1E gen2 id is verified on my machine. > > Thanks to GitHub users voidworker and civic9 for the earlier patches and BIOS > ids, and to users peter-stoll and sassman for testing the patch on their > machines. > Pushed to my review and testing queue, thank you! > [1]: https://github.com/vmatare/thinkfan/issues/58 > > Signed-off-by: Lars <la...@ap...> > --- > drivers/platform/x86/thinkpad_acpi.c | 43 ++++++++++++++++++++++++---- > 1 file changed, 37 insertions(+), 6 deletions(-) > > diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c > index da794dcfdd92..9e0f65e567be 100644 > --- a/drivers/platform/x86/thinkpad_acpi.c > +++ b/drivers/platform/x86/thinkpad_acpi.c > @@ -318,6 +318,7 @@ static struct { > u32 uwb:1; > u32 fan_ctrl_status_undef:1; > u32 second_fan:1; > + u32 second_fan_ctl:1; > u32 beep_needs_two_args:1; > u32 mixer_no_level_control:1; > u32 battery_force_primary:1; > @@ -8325,11 +8326,19 @@ static int fan_set_level(int level) > > switch (fan_control_access_mode) { > case TPACPI_FAN_WR_ACPI_SFAN: > - if (level >= 0 && level <= 7) { > - if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) > - return -EIO; > - } else > + if ((level < 0) || (level > 7)) > return -EINVAL; > + > + if (tp_features.second_fan_ctl) { > + if (!fan_select_fan2() || > + !acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) { > + pr_warn("Couldn't set 2nd fan level, disabling support\n"); > + tp_features.second_fan_ctl = 0; > + } > + fan_select_fan1(); > + } > + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) > + return -EIO; > break; > > case TPACPI_FAN_WR_ACPI_FANS: > @@ -8346,6 +8355,15 @@ static int fan_set_level(int level) > else if (level & TP_EC_FAN_AUTO) > level |= 4; /* safety min speed 4 */ > > + if (tp_features.second_fan_ctl) { > + if (!fan_select_fan2() || > + !acpi_ec_write(fan_status_offset, level)) { > + pr_warn("Couldn't set 2nd fan level, disabling support\n"); > + tp_features.second_fan_ctl = 0; > + } > + fan_select_fan1(); > + > + } > if (!acpi_ec_write(fan_status_offset, level)) > return -EIO; > else > @@ -8764,6 +8782,7 @@ static const struct attribute_group fan_attr_group = { > > #define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */ > #define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */ > +#define TPACPI_FAN_2CTL 0x0004 /* selects fan2 control */ > > static const struct tpacpi_quirk fan_quirk_table[] __initconst = { > TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1), > @@ -8772,6 +8791,13 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { > TPACPI_QEC_IBM('7', '0', TPACPI_FAN_Q1), > TPACPI_QEC_LNV('7', 'M', TPACPI_FAN_2FAN), > TPACPI_Q_LNV('N', '1', TPACPI_FAN_2FAN), > + TPACPI_Q_LNV3('N', '1', 'D', TPACPI_FAN_2CTL), /* P70 */ > + TPACPI_Q_LNV3('N', '1', 'E', TPACPI_FAN_2CTL), /* P50 */ > + TPACPI_Q_LNV3('N', '1', 'T', TPACPI_FAN_2CTL), /* P71 */ > + TPACPI_Q_LNV3('N', '1', 'U', TPACPI_FAN_2CTL), /* P51 */ > + TPACPI_Q_LNV3('N', '2', 'C', TPACPI_FAN_2CTL), /* P52 / P72 */ > + TPACPI_Q_LNV3('N', '2', 'E', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (1st gen) */ > + TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */ > }; > > static int __init fan_init(struct ibm_init_struct *iibm) > @@ -8789,6 +8815,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) > fan_watchdog_maxinterval = 0; > tp_features.fan_ctrl_status_undef = 0; > tp_features.second_fan = 0; > + tp_features.second_fan_ctl = 0; > fan_control_desired_level = 7; > > if (tpacpi_is_ibm()) { > @@ -8813,8 +8840,12 @@ static int __init fan_init(struct ibm_init_struct *iibm) > fan_quirk1_setup(); > if (quirks & TPACPI_FAN_2FAN) { > tp_features.second_fan = 1; > - dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, > - "secondary fan support enabled\n"); > + pr_info("secondary fan support enabled\n"); > + } > + if (quirks & TPACPI_FAN_2CTL) { > + tp_features.second_fan = 1; > + tp_features.second_fan_ctl = 1; > + pr_info("secondary fan control enabled\n"); > } > } else { > pr_err("ThinkPad ACPI EC access misbehaving, fan status and control unavailable\n"); > -- > 2.25.3 > -- With Best Regards, Andy Shevchenko |
