|
From: Marco M. <ma...@la...> - 2017-05-03 20:54:03
|
Hello, For some reason /proc/acpi/button/lid/LID/state is always open even if the lid is closed. I am quite annoyed by the issue, but i ran out of options pretty fast Hardware is Lenovo X1 Carbon 2nd edition. Below you can find: - dmesg - dmidecode - /proc/acpi/wakeup Please note that everything works as expected (buttons, microphone, speakers, brightness, etc.. ). if i run acpi_listen it spots every button, but no event is reported for lid open/close. Please note that the same issue happens with 4.9.0-2 Do you have any ideas why? Thank you ********* dmesg ********* [ 0.000000] Linux version 4.9.0-1-amd64 (deb...@li...) (gcc version 6.3.0 20170124 (Debian 6.3.0-5) ) #1 SMP Debian 4.9.6-3 (2017-01-28) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=33df3ba6-798a-4442-9f44-6aca56fae1d8 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca7adfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca7ae000-0x00000000ca9adfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ca9ae000-0x00000000ccbfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xccdfe000 ACPI 2.0=0xccdfe014 SMBIOS=0xccbfe000 ESRT=0xcab39000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20BSCTO1WW/20BSCTO1WW, BIOS N14ET38W (1.16 ) 12/07/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FF0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00CD000000 mask 7FFF000000 uncachable [ 0.000000] 4 base 00CCE00000 mask 7FFFE00000 uncachable [ 0.000000] 5 base 00F0000000 mask 7FF0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xcce00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000cab39000 to 0x00000000cab39088. [ 0.000000] Base memory trampoline at [ffff8cf100085000] 85000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x21cf4c000, 0x21cf4cfff] PGTABLE [ 0.000000] BRK [0x21cf4d000, 0x21cf4dfff] PGTABLE [ 0.000000] BRK [0x21cf4e000, 0x21cf4efff] PGTABLE [ 0.000000] BRK [0x21cf4f000, 0x21cf4ffff] PGTABLE [ 0.000000] BRK [0x21cf50000, 0x21cf50fff] PGTABLE [ 0.000000] BRK [0x21cf51000, 0x21cf51fff] PGTABLE [ 0.000000] BRK [0x21cf52000, 0x21cf52fff] PGTABLE [ 0.000000] BRK [0x21cf53000, 0x21cf53fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35a79000-0x36d33fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000CCDFE1C0 0000F4 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000CCDF9000 00010C (v05 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000CCDE3000 0112AD (v02 LENOVO TP-N14 00001160 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000CCD68000 000040 [ 0.000000] ACPI: ASF! 0x00000000CCDFD000 0000A5 (v32 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000CCDFC000 000038 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: ECDT 0x00000000CCDFB000 000052 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000CCDF8000 000098 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000CCDF7000 00003C (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCDF6000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDF5000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE2000 000290 (v01 LENOVO PcieAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDF000 000691 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDE000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDD000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDB000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDA000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000CCDD9000 00006E (v05 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCDD8000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000CCDD7000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000CCDD6000 0006B0 (v02 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x00000000CCDD5000 000042 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000CCCB1000 000055 (v03 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000CCDD4000 000046 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000CCDD3000 000064 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000CCDD2000 00030A (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: DMAR 0x00000000CCDD1000 0000B0 (v01 LENOVO TP-N14 00001160 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22dffb000-0x22dffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000008bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ca7adfff] [ 0.000000] node 0: [mem 0x00000000ccdff000-0x00000000ccdfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022dffffff] [ 0.000000] On node 0 totalpages: 2066233 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 41 pages reserved [ 0.000000] DMA zone: 3978 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12895 pages used for memmap [ 0.000000] DMA32 zone: 825263 pages, LIFO batch:31 [ 0.000000] Normal zone: 19328 pages used for memmap [ 0.000000] Normal zone: 1236992 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000ce000000-0x00000000cfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xca7ae000-0xca9adfff] [ 0.000000] PM: Registered nosave memory: [mem 0xca9ae000-0xccbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcce00000-0xcdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff8cf32dc00000 s103768 r8192 d31400 u262144 [ 0.000000] pcpu-alloc: s103768 r8192 d31400 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033905 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=33df3ba6-798a-4442-9f44-6aca56fae1d8 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7946052K/8264932K available (6146K kernel code, 1134K rwdata, 2844K rodata, 1392K init, 812K bss, 318880K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:760 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.904 MHz processor [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.80 BogoMIPS (lpj=8779616) [ 0.000026] pid_max: default: 32768 minimum: 301 [ 0.000043] ACPI: Core revision 20160831 [ 0.018547] ACPI: 13 ACPI AML tables successfully acquired and loaded [ 0.048678] Security Framework initialized [ 0.048680] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.048684] AppArmor: AppArmor disabled by boot time parameter [ 0.049124] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.050756] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.051467] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.051475] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.051733] CPU: Physical Processor ID: 0 [ 0.051734] CPU: Processor Core ID: 0 [ 0.051738] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.051738] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.051742] mce: CPU supports 7 MCE banks [ 0.051751] CPU0: Thermal monitoring enabled (TM1) [ 0.051763] process: using mwait in idle threads [ 0.051766] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.051767] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.052125] Freeing SMP alternatives memory: 24K (ffffffff88a79000 - ffffffff88a7f000) [ 0.056640] ftrace: allocating 24999 entries in 98 pages [ 0.067743] smpboot: Max logical packages: 4 [ 0.067753] DMAR: Host address width 39 [ 0.067755] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.067760] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.067761] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.067765] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.067766] DMAR: RMRR base: 0x000000cb3fc000 end: 0x000000cb412fff [ 0.067767] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff [ 0.067769] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.067769] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.067770] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.067771] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.068200] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.068200] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.068826] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.108515] TSC deadline timer enabled [ 0.108517] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.108521] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.108564] ... version: 3 [ 0.108564] ... bit width: 48 [ 0.108565] ... generic registers: 4 [ 0.108565] ... value mask: 0000ffffffffffff [ 0.108566] ... max period: 00007fffffffffff [ 0.108566] ... fixed-purpose events: 3 [ 0.108567] ... event mask: 000000070000000f [ 0.109234] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.109330] x86: Booting SMP configuration: [ 0.109330] .... node #0, CPUs: #1 #2 #3 [ 0.350643] x86: Booted up 1 node, 4 CPUs [ 0.350645] smpboot: Total of 4 processors activated (17562.91 BogoMIPS) [ 0.354470] devtmpfs: initialized [ 0.354534] x86/mm: Memory block size: 128MB [ 0.357050] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes) [ 0.357138] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.357178] pinctrl core: initialized pinctrl subsystem [ 0.357287] NET: Registered protocol family 16 [ 0.366186] cpuidle: using governor ladder [ 0.382204] cpuidle: using governor menu [ 0.382231] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.382232] ACPI: bus type PCI registered [ 0.382233] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.382423] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.382424] PCI: not using MMCONFIG [ 0.382425] PCI: Using configuration type 1 for base access [ 0.398341] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.398341] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.398582] ACPI: Added _OSI(Module Device) [ 0.398583] ACPI: Added _OSI(Processor Device) [ 0.398584] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.398585] ACPI: Added _OSI(Processor Aggregator Device) [ 0.398592] ACPI : EC: EC started [ 0.399544] ACPI: \: Used as first EC [ 0.399545] ACPI: \: GPE=0x24, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.399547] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.403729] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.547735] ACPI: Dynamic OEM Table Load: [ 0.547745] ACPI: SSDT 0xFFFF8CF323892000 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.548130] ACPI: Dynamic OEM Table Load: [ 0.548138] ACPI: SSDT 0xFFFF8CF3238C0000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.548587] ACPI: Dynamic OEM Table Load: [ 0.548593] ACPI: SSDT 0xFFFF8CF323882E00 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.549568] ACPI : EC: EC stopped [ 0.549569] ACPI : EC: EC started [ 0.549712] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC [ 0.549713] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x24, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.549714] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions [ 0.549715] ACPI: Interpreter enabled [ 0.549749] ACPI: (supports S0 S3 S4 S5) [ 0.549750] ACPI: Using IOAPIC for interrupt routing [ 0.549780] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.550254] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.550261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.646573] ACPI: Power Resource [PUBS] (on) [ 0.710719] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.711044] ACPI: Power Resource [NVP3] (on) [ 0.711075] ACPI: Power Resource [NVP2] (on) [ 0.816018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.816083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816144] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816205] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816265] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816325] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816385] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816531] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.816535] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.816647] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.816696] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.816698] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.816699] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.816700] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.816893] PCI host bridge to bus 0000:00 [ 0.816895] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.816896] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.816897] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.816898] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.816899] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.816901] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.816909] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.816997] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.817008] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.817014] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.817018] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.817100] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.817107] pci 0000:00:03.0: reg 0x10: [mem 0xf1130000-0xf1133fff 64bit] [ 0.817210] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.817224] pci 0000:00:14.0: reg 0x10: [mem 0xf1120000-0xf112ffff 64bit] [ 0.817278] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.817311] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.817350] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.817367] pci 0000:00:16.0: reg 0x10: [mem 0xf1139000-0xf113901f 64bit] [ 0.817431] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.817503] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000 [ 0.817515] pci 0000:00:19.0: reg 0x10: [mem 0xf1100000-0xf111ffff] [ 0.817522] pci 0000:00:19.0: reg 0x14: [mem 0xf113e000-0xf113efff] [ 0.817529] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.817580] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.817613] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.817651] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.817666] pci 0000:00:1b.0: reg 0x10: [mem 0xf1134000-0xf1137fff 64bit] [ 0.817719] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.817792] pci 0000:00:1c.0: [8086:9c92] type 01 class 0x060400 [ 0.817860] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.817977] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400 [ 0.818049] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.818121] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.818166] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.818182] pci 0000:00:1d.0: reg 0x10: [mem 0xf113d000-0xf113d3ff] [ 0.818263] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.818300] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.818343] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.818515] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.818527] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.818533] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.818539] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.818546] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.818552] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.818558] pci 0000:00:1f.2: reg 0x24: [mem 0xf113c000-0xf113c7ff] [ 0.818590] pci 0000:00:1f.2: PME# supported from D3hot [ 0.818657] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.818671] pci 0000:00:1f.3: reg 0x10: [mem 0xf1138000-0xf11380ff 64bit] [ 0.818688] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.818781] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.818808] pci 0000:00:1f.6: reg 0x10: [mem 0xf113b000-0xf113bfff 64bit] [ 0.819016] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.819304] pci 0000:04:00.0: [8086:095b] type 00 class 0x028000 [ 0.819388] pci 0000:04:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit] [ 0.819668] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.830994] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.830998] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff] [ 0.879252] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.879333] ACPI : EC: event unblocked [ 0.879340] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x24, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.879341] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.879520] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.879521] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.879524] vgaarb: loaded [ 0.879524] vgaarb: bridge control possible 0000:00:02.0 [ 0.879561] Registered efivars operations [ 0.925626] PCI: Using ACPI for IRQ routing [ 0.926894] PCI: pci_cache_line_size set to 64 bytes [ 0.927238] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.927239] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff] [ 0.927239] e820: reserve RAM buffer [mem 0xca7ae000-0xcbffffff] [ 0.927240] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff] [ 0.927241] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff] [ 0.927383] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.927388] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.929407] clocksource: Switched to clocksource hpet [ 0.935567] VFS: Disk quotas dquot_6.6.0 [ 0.935591] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.935671] pnp: PnP ACPI init [ 0.936096] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.936098] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.936099] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.936100] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.936102] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.936103] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.936104] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.936105] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.936106] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.936108] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.936109] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.936110] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.936112] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.936113] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.936114] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.936116] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.936117] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.936120] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.936208] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.936229] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.936231] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.936233] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.936234] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.936235] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.936236] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.936240] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.936241] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.936243] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.936244] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.936245] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.936246] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.936248] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.936250] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.936251] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.936252] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.936254] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.936255] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.936257] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.936319] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.936340] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.936361] pnp 00:04: Plug and Play ACPI device, IDs LEN0048 PNP0f13 (active) [ 0.936645] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.936827] system 00:06: [mem 0xd0010000-0xd001ffff] has been reserved [ 0.936828] system 00:06: [mem 0xd0000000-0xd000ffff] has been reserved [ 0.936830] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.936860] pnp: PnP ACPI: found 7 devices [ 0.943049] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.943068] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.943070] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.943071] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.943083] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.943084] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.943086] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.943087] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.943088] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.943089] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.943092] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff] [ 0.943097] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.943099] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.943101] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.943110] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.943114] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd02fffff] [ 0.943117] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.943122] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.943126] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff] [ 0.943134] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.943135] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.943136] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.943137] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window] [ 0.943138] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.943140] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.943141] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd02fffff] [ 0.943142] pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.943143] pci_bus 0000:04: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.943259] NET: Registered protocol family 2 [ 0.943427] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.943542] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.943650] TCP: Hash tables configured (established 65536 bind 65536) [ 0.943672] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.943693] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.943745] NET: Registered protocol family 1 [ 0.943756] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.944247] PCI: CLS 64 bytes, default 64 [ 0.944289] Unpacking initramfs... [ 1.306499] Freeing initrd memory: 19180K (ffff8cf135a79000 - ffff8cf136d34000) [ 1.306548] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.306550] software IO TLB [mem 0xba57f000-0xbe57f000] (64MB) mapped at [ffff8cf1ba57f000-ffff8cf1be57efff] [ 1.306912] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.306944] audit: initializing netlink subsys (disabled) [ 1.306959] audit: type=2000 audit(1493842262.268:1): initialized [ 1.307309] Initialise system trusted keyrings [ 1.307401] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.307433] zbud: loaded [ 1.349947] Key type asymmetric registered [ 1.349949] Asymmetric key parser 'x509' registered [ 1.349969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.349996] io scheduler noop registered [ 1.349997] io scheduler deadline registered [ 1.350002] io scheduler cfq registered (default) [ 1.350321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.350326] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.350340] efifb: probing for efifb [ 1.350351] efifb: framebuffer at 0xe0000000, using 1216k, total 1216k [ 1.350351] efifb: mode is 640x480x32, linelength=2560, pages=1 [ 1.350352] efifb: scrolling: redraw [ 1.350353] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.351099] Console: switching to colour frame buffer device 80x30 [ 1.351749] fb0: EFI VGA frame buffer device [ 1.351757] intel_idle: MWAIT substates: 0x11142120 [ 1.351757] intel_idle: v0.4.1 model 0x3D [ 1.351990] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.352171] GHES: HEST is not enabled! [ 1.352227] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.352575] Linux agpgart interface v0.103 [ 1.352615] AMD IOMMUv2 driver by Joerg Roedel <jr...@su...> [ 1.352616] AMD IOMMUv2 functionality not available on this system [ 1.352944] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.354537] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.354541] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.354656] mousedev: PS/2 mouse device common for all mice [ 1.354699] rtc_cmos 00:02: RTC can wake from S4 [ 1.354837] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.354866] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.354877] intel_pstate: Intel P-state driver initializing [ 1.355079] ledtrig-cpu: registered to indicate activity on CPUs [ 1.356127] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.356817] NET: Registered protocol family 10 [ 1.357359] mip6: Mobile IPv6 [ 1.357364] NET: Registered protocol family 17 [ 1.357369] mpls_gso: MPLS GSO support [ 1.357849] microcode: sig=0x306d4, pf=0x40, revision=0x24 [ 1.358001] microcode: Microcode Update Driver: v2.01 <ti...@ai...>, Peter Oruba [ 1.358333] registered taskstats version 1 [ 1.358336] Loading compiled-in X.509 certificates [ 1.361298] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 1.361996] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 1.362035] zswap: loaded using pool lzo/zbud [ 1.363099] rtc_cmos 00:02: setting system clock to 2017-05-03 20:11:02 UTC (1493842262) [ 1.363212] PM: Hibernation image not present or could not be loaded. [ 1.365938] Freeing unused kernel memory: 1392K (ffffffff8891d000 - ffffffff88a79000) [ 1.365941] Write protecting the kernel read-only data: 12288k [ 1.367171] Freeing unused kernel memory: 2028K (ffff8cf31c605000 - ffff8cf31c800000) [ 1.371703] Freeing unused kernel memory: 1252K (ffff8cf31cac7000 - ffff8cf31cc00000) [ 1.378085] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.391803] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.391868] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.391876] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.391885] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.392698] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.392726] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.393709] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.393750] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.393760] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.393982] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.407482] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.413319] pps_core: LinuxPPS API ver. 1 registered [ 1.413321] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <gio...@li...> [ 1.414188] PTP clock support registered [ 1.419872] ACPI: bus type USB registered [ 1.419894] usbcore: registered new interface driver usbfs [ 1.419906] usbcore: registered new interface driver hub [ 1.419998] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.420000] ACPI: Thermal Zone [THM0] (49 C) [ 1.420065] usbcore: registered new device driver usb [ 1.420699] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.420699] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.420866] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.421271] SCSI subsystem initialized [ 1.422507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.423172] ehci-pci: EHCI PCI platform driver [ 1.433272] libata version 3.00 loaded. [ 1.440706] AVX2 version of gcm_enc/dec engaged. [ 1.440707] AES CTR mode by8 optimization enabled [ 1.511702] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.594301] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:5b:b6:64 [ 1.594303] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.594331] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 1.594505] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.594513] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.595579] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 1.595582] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.596017] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.596018] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.596020] usb usb1: Product: xHCI Host Controller [ 1.596020] usb usb1: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd [ 1.596031] usb usb1: SerialNumber: 0000:00:14.0 [ 1.596282] hub 1-0:1.0: USB hub found [ 1.596308] hub 1-0:1.0: 11 ports detected [ 1.597300] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.597303] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.597361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.597362] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.597363] usb usb2: Product: xHCI Host Controller [ 1.597364] usb usb2: Manufacturer: Linux 4.9.0-1-amd64 xhci-hcd [ 1.597364] usb usb2: SerialNumber: 0000:00:14.0 [ 1.597501] hub 2-0:1.0: USB hub found [ 1.597516] hub 2-0:1.0: 4 ports detected [ 1.598289] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 1.598310] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.599806] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.599811] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.599822] ehci-pci 0000:00:1d.0: debug port 2 [ 1.603731] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.603743] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf113d000 [ 1.617486] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.617534] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.617535] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.617536] usb usb3: Product: EHCI Host Controller [ 1.617537] usb usb3: Manufacturer: Linux 4.9.0-1-amd64 ehci_hcd [ 1.617538] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.617682] hub 3-0:1.0: USB hub found [ 1.617686] hub 3-0:1.0: 3 ports detected [ 1.617977] ahci 0000:00:1f.2: version 3.0 [ 1.628273] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x8 impl SATA mode [ 1.628275] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.628955] scsi host0: ahci [ 1.629069] scsi host1: ahci [ 1.629152] scsi host2: ahci [ 1.629228] scsi host3: ahci [ 1.629271] ata1: DUMMY [ 1.629272] ata2: DUMMY [ 1.629272] ata3: DUMMY [ 1.629275] ata4: SATA max UDMA/133 abar m2048@0xf113c000 port 0xf113c280 irq 44 [ 1.921453] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.945093] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.945486] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.947754] ata4.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.947756] ata4.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.948109] ata4.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.949641] ata4.00: supports DRM functions and may not be fully accessible [ 1.950319] ata4.00: ATA-10: INTEL SSDSCKJF240A5L, LTVi, max UDMA/133 [ 1.950320] ata4.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.957535] ata4.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.957538] ata4.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.957856] ata4.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.959422] ata4.00: supports DRM functions and may not be fully accessible [ 1.965110] ata4.00: configured for UDMA/133 [ 1.965407] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSCKJF24 LTVi PQ: 0 ANSI: 5 [ 1.999897] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.000063] sd 3:0:0:0: [sda] Write Protect is off [ 2.000065] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.000086] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.001063] sda: sda1 sda2 sda3 [ 2.001391] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.026816] PM: Starting manual resume from disk [ 2.026818] PM: Hibernation image partition 8:3 present [ 2.026818] PM: Looking for hibernation image. [ 2.026987] PM: Image not found (code -22) [ 2.026987] PM: Hibernation image not present or could not be loaded. [ 2.062185] usb 1-1: New USB device found, idVendor=8644, idProduct=8003 [ 2.062187] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.062188] usb 1-1: Product: USB Flash Disk [ 2.062189] usb 1-1: Manufacturer: General [ 2.062190] usb 1-1: SerialNumber: 0411151000056747 [ 2.062470] random: fast init done [ 2.073928] usb-storage 1-1:1.0: USB Mass Storage device detected [ 2.074019] scsi host4: usb-storage 1-1:1.0 [ 2.074092] usbcore: registered new interface driver usb-storage [ 2.075052] usbcore: registered new interface driver uas [ 2.101809] usb 3-1: New USB device found, idVendor=8087, idProduct=8001 [ 2.101811] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.102093] hub 3-1:1.0: USB hub found [ 2.102169] hub 3-1:1.0: 8 ports detected [ 2.115475] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.181429] usb 1-2: new full-speed USB device number 3 using xhci_hcd [ 2.199680] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.208889] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 2.241089] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 2.268378] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.268526] systemd[1]: Detected architecture x86-64. [ 2.268743] systemd[1]: Set hostname to <lilith>. [ 2.287048] systemd-sysv-generator[206]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory [ 2.298735] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3072, fw id: 1795685 [ 2.298742] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.309468] tsc: Refined TSC clocksource calibration: 2194.922 MHz [ 2.309474] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa375eb081, max_idle_ns: 440795260500 ns [ 2.326529] usb 1-2: New USB device found, idVendor=1050, idProduct=0116 [ 2.326531] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.326532] usb 1-2: Product: Yubikey NEO OTP+U2F+CCID [ 2.326532] usb 1-2: Manufacturer: Yubico [ 2.333405] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 2.335976] systemd[1]: nullmailer.service: Cannot add dependency job, ignoring: Unit nullmailer.service is masked. [ 2.335979] systemd[1]: postgresql.service: Cannot add dependency job, ignoring: Unit postgresql.service is masked. [ 2.336756] systemd[1]: Listening on udev Control Socket. [ 2.337485] systemd[1]: Created slice System Slice. [ 2.337706] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.337744] systemd[1]: Listening on Syslog Socket. [ 2.337774] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 2.353710] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 2.379446] lp: driver loaded but no devices found [ 2.382719] ppdev: user-space parallel port driver [ 2.413107] systemd-journald[231]: Received request to flush runtime journal from PID 1 [ 2.445444] usb 1-6: new full-speed USB device number 4 using xhci_hcd [ 2.486799] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 [ 2.486919] ACPI: Lid Switch [LID] [ 2.486980] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 2.486983] ACPI: Sleep Button [SLPB] [ 2.487054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 2.487055] ACPI: Power Button [PWRF] [ 2.492676] wmi: Mapper loaded [ 2.497557] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 2.516624] [drm] Initialized [ 2.519519] Non-volatile memory driver v1.3 [ 2.528113] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 2.528114] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 2.528115] thinkpad_acpi: ThinkPad BIOS N14ET38W (1.16 ), EC unknown [ 2.528116] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 3rd, model 20BSCTO1WW [ 2.530081] thinkpad_acpi: radio switch found; radios are enabled [ 2.530212] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 2.530213] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 2.547734] ACPI: Battery Slot [BAT0] (battery present) [ 2.548901] ACPI: AC Adapter [AC] (on-line) [ 2.551633] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 2.559762] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 2.567576] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.567579] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.567580] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 2.567582] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 2.567583] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 2.567585] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 2.567587] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 2.569023] [drm] Memory usable by graphics device = 4096M [ 2.569026] checking generic (e0000000 130000) vs hw (e0000000 10000000) [ 2.569027] fb: switching to inteldrmfb from EFI VGA [ 2.569066] Console: switching to colour dummy device 80x25 [ 2.591645] usb 1-6: New USB device found, idVendor=138a, idProduct=0017 [ 2.591648] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.591649] usb 1-6: SerialNumber: e7fb863681fb [ 2.592034] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 2.592661] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 2.592711] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 2.593512] [drm] Replacing VGA console driver [ 2.603502] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.603503] [drm] Driver supports precise vblank timestamp query. [ 2.603787] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.635373] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.635788] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 2.638046] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.638054] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 2.638096] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.641018] fbcon: inteldrmfb (fb0) is primary device [ 2.673901] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 2.673911] EFI Variables Facility v0.08 2004-May-17 [ 2.694304] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 2.694305] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.694306] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.694306] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 2.694307] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.719368] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 2.720891] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 2.720936] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 2.720978] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 2.725798] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 2.745675] pstore: using zlib compression [ 2.784685] pstore: Registered efi as persistent store backend [ 2.786892] Intel(R) Wireless WiFi driver for Linux [ 2.786892] Copyright(c) 2003- 2015 Intel Corporation [ 2.793613] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2) [ 2.793615] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2 [ 2.793631] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2) [ 2.793632] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2 [ 2.793821] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2) [ 2.793822] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2 [ 2.793835] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2) [ 2.793837] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2 [ 2.797100] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-7265D-22.ucode [ 2.797404] iwlwifi 0000:04:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm [ 2.811504] intel_rapl: Found RAPL domain package [ 2.811505] intel_rapl: Found RAPL domain core [ 2.811506] intel_rapl: Found RAPL domain uncore [ 2.811506] intel_rapl: Found RAPL domain dram [ 2.854509] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 2.854886] iTCO_vendor_support: vendor-support=0 [ 2.855887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.855932] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.856047] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.856846] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 2.857305] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 2.858608] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a [ 2.858610] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.920782] Adding 8264700k swap on /dev/sda3. Priority:-1 extents:1 across:8264700k SSFS [ 2.930846] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.977438] usb 1-8: new high-speed USB device number 6 using xhci_hcd [ 2.985328] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.078007] scsi 4:0:0:0: Direct-Access General USB Flash Disk 1.00 PQ: 0 ANSI: 2 [ 3.078358] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3.078760] sd 4:0:0:0: [sdb] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 3.078990] sd 4:0:0:0: [sdb] Write Protect is off [ 3.078992] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3.079207] sd 4:0:0:0: [sdb] No Caching mode page found [ 3.079208] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 3.081060] sdb: sdb1 [ 3.082424] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 3.156285] usb 1-8: New USB device found, idVendor=04f2, idProduct=b45d [ 3.156286] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.156287] usb 1-8: Product: Integrated Camera [ 3.156288] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd. [ 3.156288] usb 1-8: SerialNumber: 0x0001 [ 3.178799] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 [ 3.333632] clocksource: Switched to clocksource tsc [ 3.687877] Console: switching to colour frame buffer device 240x67 [ 3.708339] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.887667] systemd-sysv-generator[688]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory [ 3.938737] systemd-sysv-generator[732]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory [ 4.196518] hidraw: raw HID events driver (C) Jiri Kosina [ 4.212021] usbcore: registered new interface driver usbhid [ 4.212023] usbhid: USB HID core driver [ 4.217197] media: Linux media interface: v0.10 [ 4.224324] Bluetooth: Core ver 2.22 [ 4.224340] NET: Registered protocol family 31 [ 4.224341] Bluetooth: HCI device and connection manager initialized [ 4.224343] Bluetooth: HCI socket layer initialized [ 4.224345] Bluetooth: L2CAP socket layer initialized [ 4.224348] Bluetooth: SCO socket layer initialized [ 4.227279] input: Yubico Yubikey NEO OTP+U2F+CCID as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1050:0116.0001/input/input16 [ 4.231382] Linux video capture interface: v2.00 [ 4.235510] usbcore: registered new interface driver btusb [ 4.247474] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b45d) [ 4.249997] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized! [ 4.250001] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized! [ 4.250003] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized! [ 4.250040] Bluetooth: hci0: read Intel version: 370810011003110e25 [ 4.250041] Bluetooth: hci0: Intel device is already patched. patch num: 25 [ 4.250113] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input17 [ 4.266635] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.266636] Bluetooth: BNEP filters: protocol multicast [ 4.266641] Bluetooth: BNEP socket layer initialized [ 4.290116] hid-generic 0003:1050:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:14.0-2/input0 [ 4.290257] usbcore: registered new interface driver uvcvideo [ 4.290259] USB Video Class driver (1.1.1) [ 4.290485] hid-generic 0003:1050:0116.0002: hiddev0,hidraw1: USB HID v1.10 Device [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:14.0-2/input1 [ 4.373393] random: crng init done [ 5.369791] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.589608] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.595343] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.597629] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.598087] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.663938] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.664395] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.695022] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.705636] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.706093] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.779829] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.780287] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.803503] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.999577] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.019822] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.028506] Ebtables v2.0 registered [ 6.286594] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.290452] tun: Universal TUN/TAP device driver, 1.6 [ 6.290453] tun: (C) 1999-2004 Max Krasnyansky <ma...@qu...> [ 6.345607] virbr0: port 1(virbr0-nic) entered blocking state [ 6.345608] virbr0: port 1(virbr0-nic) entered disabled state [ 6.345682] device virbr0-nic entered promiscuous mode [ 6.452860] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 6.476870] virbr0: port 1(virbr0-nic) entered blocking state [ 6.476872] virbr0: port 1(virbr0-nic) entered listening state [ 6.529775] virbr0: port 1(virbr0-nic) entered disabled state [ 6.613527] systemd-sysv-generator[1140]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory [ 6.840130] systemd-sysv-generator[1209]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory [ 9.791422] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.840453] wlan0: authenticate with dc:9f:db:62:e8:a2 [ 9.849065] wlan0: send auth to dc:9f:db:62:e8:a2 (try 1/3) [ 9.855027] wlan0: authenticated [ 9.857551] wlan0: associate with dc:9f:db:62:e8:a2 (try 1/3) [ 9.861043] wlan0: RX AssocResp from dc:9f:db:62:e8:a2 (capab=0x431 status=0 aid=4) [ 9.862717] wlan0: associated [ 9.862755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.117593] systemd-sysv-generator[1338]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory [ 10.285644] systemd-sysv-generator[1409]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory [ 12.288429] Bluetooth: RFCOMM TTY layer initialized [ 12.288435] Bluetooth: RFCOMM socket layer initialized [ 12.288440] Bluetooth: RFCOMM ver 1.11 [ 19.398953] fuse init (API version 7.26) ********* dmesg ********* # dmidecode 3.0 Getting SMBIOS data from sysfs. SMBIOS 2.7 present. 66 structures occupying 3190 bytes. Table at 0xCCBFD000. Handle 0x0000, DMI type 222, 14 bytes OEM-specific Type Header and Data: DE 0E 00 00 01 99 00 03 10 01 20 02 30 03 Strings: Memory Init Complete End of DXE Phase BIOS Boot Complete Handle 0x0001, DMI type 14, 8 bytes Group Associations Name: Intel(R) Silicon View Technology Items: 1 0x0000 (<OUT OF SPEC>) Handle 0x0002, DMI type 134, 13 bytes OEM-specific Type Header and Data: 86 0D 02 00 08 07 15 20 00 00 00 00 00 Handle 0x0003, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Parity System Type: Data Associativity: 8-way Set-associative Handle 0x0004, DMI type 4, 42 bytes... [truncated message content] |
