|
From: Henrique de M. H. <hm...@hm...> - 2007-03-12 00:21:46
|
Update documentation header, and relocate a hunk of text that was missplaced.
Signed-off-by: Henrique de Moraes Holschuh <hm...@hm...>
---
Documentation/ibm-acpi.txt | 85 +++++++++++++-------------------------------
1 files changed, 25 insertions(+), 60 deletions(-)
diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt
index cdcef01..f409f4b 100644
--- a/Documentation/ibm-acpi.txt
+++ b/Documentation/ibm-acpi.txt
@@ -1,16 +1,17 @@
IBM ThinkPad ACPI Extras Driver
- Version 0.12
- 17 August 2005
+ Version 0.13
+ 31 December 2006
Borislav Deianov <bor...@us...>
+ Henrique de Moraes Holschuh <hm...@hm...>
http://ibm-acpi.sf.net/
This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports
various features of these laptops which are accessible through the
-ACPI framework but not otherwise supported by the generic Linux ACPI
-drivers.
+ACPI framework but not otherwise fully supported by the generic Linux
+ACPI drivers.
Status
@@ -638,6 +639,26 @@ The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
certain conditions are met. It will override any fan programming done
through ibm-acpi.
+The ibm-acpi kernel driver can be programmed to revert the fan level
+to a safe setting if userspace does not issue one of the fan commands:
+"enable", "disable", "level" or "watchdog" within a configurable
+ammount of time. To do this, use the "watchdog" command.
+
+ echo 'watchdog <interval>' > /proc/acpi/ibm/fan
+
+Interval is the ammount of time in seconds to wait for one of the
+above mentioned fan commands before reseting the fan level to a safe
+one. If set to zero, the watchdog is disabled (default). When the
+watchdog timer runs out, it does the exact equivalent of the "enable"
+fan command.
+
+Note that the watchdog timer stops after it enables the fan. It will
+be rearmed again automatically (using the same interval) when one of
+the above mentioned fan commands is received. The fan watchdog is,
+therefore, not suitable to protect against fan mode changes made
+through means other than the "enable", "disable", and "level" fan
+commands.
+
EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
---------------------------------------
@@ -670,59 +691,3 @@ example:
modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable
-The ibm-acpi kernel driver can be programmed to revert the fan level
-to a safe setting if userspace does not issue one of the fan commands:
-"enable", "disable", "level" or "watchdog" within a configurable
-ammount of time. To do this, use the "watchdog" command.
-
- echo 'watchdog <interval>' > /proc/acpi/ibm/fan
-
-Interval is the ammount of time in seconds to wait for one of the
-above mentioned fan commands before reseting the fan level to a safe
-one. If set to zero, the watchdog is disabled (default). When the
-watchdog timer runs out, it does the exact equivalent of the "enable"
-fan command.
-
-Note that the watchdog timer stops after it enables the fan. It will
-be rearmed again automatically (using the same interval) when one of
-the above mentioned fan commands is received. The fan watchdog is,
-therefore, not suitable to protect against fan mode changes made
-through means other than the "enable", "disable", and "level" fan
-commands.
-
-
-Example Configuration
----------------------
-
-The ACPI support in the kernel is intended to be used in conjunction
-with a user-space daemon, acpid. The configuration files for this
-daemon control what actions are taken in response to various ACPI
-events. An example set of configuration files are included in the
-config/ directory of the tarball package available on the web
-site. Note that these are provided for illustration purposes only and
-may need to be adapted to your particular setup.
-
-The following utility scripts are used by the example action
-scripts (included with ibm-acpi for completeness):
-
- /usr/local/sbin/idectl -- from the hdparm source distribution,
- see http://www.ibiblio.org/pub/Linux/system/hardware
- /usr/local/sbin/laptop_mode -- from the Linux kernel source
- distribution, see Documentation/laptop-mode.txt
- /sbin/service -- comes with Redhat/Fedora distributions
- /usr/sbin/hibernate -- from the Software Suspend 2 distribution,
- see http://softwaresuspend.berlios.de/
-
-Toan T Nguyen <nt...@ph...> notes that Suse uses the
-powersave program to suspend ('powersave --suspend-to-ram') or
-hibernate ('powersave --suspend-to-disk'). This means that the
-hibernate script is not needed on that distribution.
-
-Henrik Brix Andersen <br...@ge...> has written a Gentoo ACPI event
-handler script for the X31. You can get the latest version from
-http://dev.gentoo.org/~brix/files/x31.sh
-
-David Schweikert <dw...@ee...> has written an alternative blank.sh
-script which works on Debian systems. This scripts has now been
-extended to also work on Fedora systems and included as the default
-blank.sh in the distribution.
--
1.5.0.3
|
