Re: [Iaxclient-devel] Next to Audio Caller problem

[Babar S. <bab...@ya...>]

Hi List and Steve,

I m only testing it on windows (98,2000,XP), with my IaxClientOCX, I also noticed the dealy of one
or two seconds with the half duplex behaviour of audio (when using ilbc, speex). How to minimize
this delay ? and increase volume of audio ? (little low after Analog AGC patch).

Regards,
Babar Shafiq Nazmi.

IaxClientOCX with current CVS updated http://203.170.71.26/IaxClientSetup.exe,
http://www.geocities.com/babarnazmi/iaxclient-snap.jpg

> Date: Sun, 07 Nov 2004 01:27:19 +0100
> From: daniel huhardeaux <de...@to...>
> To: iax...@li...
> Subject: Re: [Iaxclient-devel] Next to Audio Caller problem
> 
> Michael Van Donselaar a =E9crit :
> 
> >On Sat, 06 Nov 2004 19:11:26 +0100, daniel huhardeaux <de...@to...>=
>  wrote:
> >
> > =20
> >
> >>Hi,
> >>
> >>having still my problem with iaxcomm under linux, self compiled version=
> =20
> >>or last binaries from sf, I decide to test under w2k WS. I had Diax097a=
> ,=20
> >>iaxcomm CVS Februar 04 and Iaxphone 0.1.0. This machine is connected to=
> =20
> >>the same asterisk server that my notebook is using: everything is fine,=
> =20
> >>all calls are clear both sides.
> >>
> >>Now I decide to install latest version of this software, taken from=20
> >>sf.net Diax098c, iaxcomm CVS October 04 and Iaxphone 0.2.0 build 116
> >>
> >>Launching:
> >>
> >>diax098c: class not registered - MSSTDMFT.DLL has to be installed on=20
> >>your machine
> >>   =20
> >>
> >
> >Did you ever get it to run successfully?
> > =20
> >
> Diax097a yes. For Diax 098c, even after having installed this dll in=20
> WINNT/system or WINNT/system32 I get this message.
> 
> > =20
> >
> >>iaxcomm: I can call asterisk demo on my server, no problem. I try to=20
> >>call echo test from FWD, segfault. In w2k event logs I see " ...=20
> >>exception was c0000005 at address 0041CDD5 9<no symbols>) FWD is using=20
> >>only ULAW, so I guess problem come from here.
> >>   =20
> >>
> >
> >Which version of iaxComm are these results for?
> > =20
> >
> Windows zip from october 2004 taken from SF.
> 
> > =20
> >
> >>iaxphone: start with errors initializing the DirectSound drivers
> >>
> >>Error numbers=3D0 Error description =3D
> >>
> >>and a Note about ound card not installed or in use. Clicking OK appears=
> =20
> >>same error, clicking OK a window telling me that it was an error with=20
> >>DirectX and DirectMusic modules. I pass clicking OK I call again FWD=20
> >>echo test and it's ok.
> >>   =20
> >>
> >
> > =20
> >
> >>Now I compile tkphone and test it: I get my audio but with a delay of=20
> >>more then 6s (under w2k if there was delay, maxi 1s) I immediately stop=
> =20
> >>the call, launch iasxcomm: as usually. I restart tkphone, same result a=
> s=20
> >>the first time. So definitely problem is with iaxcomm.
> >>   =20
> >>
> >
> >I'm not sure I understand this last paragraph.  It's probably better to =
> be
> >verbose than concise when describing a problem.
> > =20
> >
> Sorry. All this paragraph is concerning linux
> 
> >I'm getting that you tested tkphone both on linux and on Win2k WS.  tkph=
> one on
> >win2k gives a 1 sec audio delay; tkphone on linux gives 6 sec audio dela=
> y.
> >
> >After stopping tkphone on one of the platforms (which one?),
> >
> Only linux
> 
> > you immediately run
> >some version of iaxComm (which one?).
> >
> linux from october 2004 taken from SF or self compiled
> 
> >  iaxComm then gives you the usual problem
> >when you call (is this the segfault, or ugly audio?).
> >
> ugly audio
> 
> >  Then you restart tkphone
> >and get the same result (I assume 1-6 second audio delay).
> > =20
> >
> Yes, audio with delay.
> 
> >While the problem really may be with the iaxComm code, I don't agree tha=
> t you've
> >isolated it.
> >
> I don't say I isolate problem. Being the only one to have such=20
> behaviour, it would be  pretentious. I'm trying to find some  trail.
> 
> >  I know that DIAX and IAXPhone are not using CVS code.
> >
> >IAXPhone is using iaxclient code from before any other codecs were added=
> .  You
> >mention version 0.97a and 0.98c of DIAX, but don't show a successful run.
> >
> 0.97a is successful
> 
> >  Even
> >a 1 second audio delay for tkphone sounds unsuccessful to me.
> >
> >What results do you get on Win2k when running
> >http://iaxclient.sourceforge.net/iaxcomm/iaxcomm-win-20040228.zip ?
> > =20
> >
> As sad at the begining of my mail: is working. To summarize, taken only=20
> audio problem in account:
> 
> Diax097a, iaxcomm 02/2004, IaxPhone 0.1.0 and 0.2.0 (all windows),=20
> tkphone (linux) are working.
> 
> Thanks for your help
> 
> --=20
> Daniel> 


=====
God is a great Programmer


		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com