Re: [Iaxclient-devel] IAX Client COM ActiveX version

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Hi,

Yes I used iaxc_register.

Steve, are you doing other codecs support in iaxclient lib ??  
like (u-law,ADPCM,LPC ,LPC-10,OpenLPC 1.8,CELP 4.5,CELP 3.0,CELP 2.3).

If nobody is doing then please tell me some basics, those two function needs to changes ?
1) send_encoded_audio
2) decode_audio
and how to set frame rate and remote codec selection ?

Added in ActiveX
1) SetSpeakerVolume (left speaker number, right speaker number) (b/w 1-100)
2) SendDTMF (character for number)
3) SelectLine (number for line)
4) Incoming Call (problem fixed)

Thanks and Regards,
Babar Shafiq Nazmi.

--- Steve Kann <st...@st...> wrote:
> On Tue, 2003-07-29 at 12:19, Babar Shafiq wrote:
> 
> > Thanks Dan,
> > 
> > The confirmation is just for checking values from user cause i used in ocx
> test:test@10.0.1.2/9999
> > as default I m just doing debug version thats y i used.
> > DTMF is added with switch lines function I will update it tommorow.
> > Register command just send the (userid,password,hostname) to the * box for Registration don't
> know
> > we need re-register or not,
> > Steve can tell us about correctly.
> 
> 
> If you use iaxc_register, the registration will be kept valid during the
> lifetime of the session (i.e. as long as you're still running
> iaxclient).
> 
> 
> 
> > 
> > Babar Shafiq Nazmi.
> > 
> > 
> > --- Dan Fernandez <dan...@ho...> wrote:
> > > Babar,
> > > 
> > > This is great work also. Its working really nicely. 
> > > I have a couple of questions:
> > > 
> > > 1)Would it be possible to take out (or make it configurable) the confirmation youve added on
> > > the OCX right before dialing?
> > > 
> > > 2) What about DTMF? Are you planning to add it anytime soon?
> > > 
> > > 3) Does the register command do any subsequent registers? or shall we put a timer to
> > > re-register?
> > > 
> > > Rgds
> > > Dan
> > > 
> > >   ----- Original Message ----- 
> > >   From: Babar Shafiq 
> > >   To: iax...@li... 
> > >   Sent: Friday, July 25, 2003 1:44 PM
> > >   Subject: [Iaxclient-devel] IAX Client COM ActiveX version
> > > 
> > > 
> > >   Hello All,
> > > 
> > >   Active X version with some more work
> > > 
> > >   Now supported :- 
> > > 
> > >   API :-
> > >     a.. initIAX         (init IAXclient) 
> > >     b.. Register      (Register to the * box) 
> > >     c.. Shutdown    (IAXclient Shutdown and clean up) 
> > >     d.. Dial             (Start processing and Dial the number) 
> > >     e.. HangUp       (HangUP Current call and dumpcall) 
> > >     f.. ToglePTT     (Push to Talk, 1 and 0)
> > >   Status_Events :-
> > > 
> > >     a.. IaxClient_Messages   (TextMessage String)  same as status_callback 
> > >     b.. IaxClient_State          (StateEvent String) same as state_callback
> > >   Properties :-
> > > 
> > >     a.. Phonenumber       (String number to dial) 
> > >     b.. Userid                  (String userid) 
> > >     c.. Password             (String Password) 
> > >     d.. Host Name           (String host name or server IP) 
> > >     e.. SilenceThreshold  (Number SilenceThreshold  by default -99)
> > >   *Need some work on and support of multi lines and still have some problem in Incoming call
> 
> > > may be the messages are not sync properly, but i will fix it soon.
> > > 
> > >   http://www.geocities.com/babarnazmi/IaxClientOcx.zip
> > > 
> > >   Example how to do in VB
> > > 
> > >   Private Sub Command1_Click()
> > >   IaxClientOcx1.silencethreshold = -99
> > >   IaxClientOcx1.UserID = txt_phoneno
> > >   IaxClientOcx1.Password = txt_userid
> > >   IaxClientOcx1.PhoneNumber = txt_password
> > >   IaxClientOcx1.HostName = txt_hostname
> > >   IaxClientOcx1.Dial
> > >   End Sub
> > > 
> > >   Private Sub Command3_Click()
> > >   IaxClientOcx1.HangUp
> > >   End Sub
> > > 
> > >   Private Sub Command4_Click()
> > >   IaxClientOcx1.Password = txt_userid
> > >   IaxClientOcx1.PhoneNumber = txt_password
> > >   IaxClientOcx1.HostName = txt_hostname
> > >   IaxClientOcx1.Register
> > >   End Sub
> > > 
> > >   Private Sub Form_Load()
> > >   a = IaxClientOcx1.InitIAX
> > >   End Sub
> > > 
> > >   Private Sub Form_Unload(Cancel As Integer)
> > >   a = IaxClientOcx1.Shutdown
> > >   End Sub
> > > 
> > >   Private Sub IaxClientOcx1_Messages(ByVal Message As String)
> > >   lbl_messages.Caption = Message
> > >   End Sub
> > > 
> > >   Private Sub IaxClientOcx1_State(ByVal StateEvent As String)
> > >   lbl_state.Caption = StateEvent
> > >   End Sub
> > > 
> > > 
> > >   Private Sub Check1_Click()
> > >   If Check1.Value = vbChecked Then
> > >   IaxClientOcx1.TogglePTT 1
> > >   Else
> > >   IaxClientOcx1.TogglePTT 0
> > >   End If
> > >   End Sub
> > > 
> > >   http://www.geocities.com/babarnazmi/vbClient.zip
> > > 
> > > 
> > >   Example how to do from a web page
> > > 
> > >   <DEFANGED_OBJECT name=iax id=DTestocx1 DEFANGED_STYLE="LEFT: 0px; TOP: 0px"
> > > classid="clsid:B6ADD008-9C12-4FFB-8944-E187541DDCF0" VIEWASTEXT>
> > >    <PARAM NAME="_Version" VALUE="65536">
> > >    <PARAM NAME="_ExtentX" VALUE="2646">
> > >    <PARAM NAME="_ExtentY" VALUE="1323">
> > >    <PARAM NAME="_StockProps" VALUE="0"></OBJECT>
> > >   <DEFANGED_script language=vbscript>
> > >   DTestocx1.HostName="192.168.4.29"
> > >   DTestocx1.UserID="babarshafiq"
> > >   DTestocx1.Password="nazmi"
> > >   DTestocx1.PhoneNumber="7787323"
> > >   DTestocx1.Dial
> > > 
> > >   </script>
> > > 
> > >   I also did a ActiveX control for SoundCard manipulation. (but i think here it is out of
> topic
> > > ).
> > > 
> > >   Babar Shafiq Nazmi
> > > 
> > > 
> > > 
> > >   God is a great Programmer
> > > 
> > > 
> > > ------------------------------------------------------------------------------
> > >   Do you Yahoo!?
> > >   Yahoo! SiteBuilder - Free, easy-to-use web site design software
> > > 
> > 
> > 
> > =====
> > God is a great Programmer
> > 
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site design software
> > http://sitebuilder.yahoo.com
> > 
> > 
> > -------------------------------------------------------
> > This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> > Data Reports, E-commerce, Portals, and Forums are available now.
> > Download today and enter to win an XBOX or Visual Studio .NET.
> > http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> > _______________________________________________
> > Iaxclient-devel mailing list
> > Iax...@li...
> > https://lists.sourceforge.net/lists/listinfo/iaxclient-devel
> 
> -- 
>   Steve Kann - Chief Engineer - 520 8th Ave #2300 NY 10018 -  (212) 533-1775
>                 HorizonLive.com - collaborate . interact . learn
>    "The box said 'Requires Windows 95, NT, or better,' so I installed Linux."
> 

=====
God is a great Programmer

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com