Thread: [Iaxclient-devel] iaxcomm

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

I'am just installed the very nice iaxcomm client, but I'am not able set the
ring options, it does not ring ! 

It seams not implemented. is anyone can help me on this?

Many thanks

Biagio

hi list,

I try to play around iaxcomm PRE CVS 28/02/2004 and face some problems.

1) in options->account seems that lable of zone are not correct (host 
means username area, username means password, password and confirm 
password are host)
2) I'm running RH90 with alsa (alsa oss included) and in 
options->devices I have /dev/dsp as input *and* output device at all 
positions, and I'm unable to change them!
3) in address book, choosing a ring tone for an entry and asking preview 
give a segfault. In general references it's ok

Thanks for comments

-- 
daniel

Good morning, Daniel

On Fri, 16 Apr 2004 14:35:01 +0200, daniel huhardeaux <de...@to...> =
wrote:

>hi list,
>
>I try to play around iaxcomm PRE CVS 28/02/2004 and face some problems.
>
>1) in options->account seems that lable of zone are not correct (host=20
>means username area, username means password, password and confirm=20
>password are host)

Do you mean that the Options/Accounts dialog box (with window title =
"Manage
Accounts") reflects different information than what you entered in the =
Add
Account window?

I cant duplicate this.  I just downloaded it and cleared out my reg info =
on a
fairly standard RH9 box.

>2) I'm running RH90 with alsa (alsa oss included) and in=20
>options->devices I have /dev/dsp as input *and* output device at all=20
>positions, and I'm unable to change them!

Can someone with multiple sound cards check on this?  I only have one =
linux box
with a sound card in it, and it only has one sound card.

>3) in address book, choosing a ring tone for an entry and asking preview=
=20
>give a segfault. In general references it's ok

Can anyone else duplicate this?  I only have one linux box upon which to =
test
this, but it works fine.
>
>Thanks for comments

I'm sorry I couldn't give you better info at this point.  Maybe someone =
else has
sokme ideas.

Michael Van Donselaar a =E9crit :

>Good morning, Daniel
>
>On Fri, 16 Apr 2004 14:35:01 +0200, daniel huhardeaux <de...@to...>=
 wrote:
>
> =20
>
>>hi list,
>>
>>I try to play around iaxcomm PRE CVS 28/02/2004 and face some problems.
>>
>>1) in options->account seems that lable of zone are not correct (host=20
>>means username area, username means password, password and confirm=20
>>password are host)
>>   =20
>>
>
>Do you mean that the Options/Accounts dialog box (with window title "Man=
age
>Accounts") reflects different information than what you entered in the A=
dd
>Account window?
>
>I cant duplicate this.  I just downloaded it and cleared out my reg info=
 on a
>fairly standard RH9 box.
> =20
>
Yes. I'm running iaxcomm in terminal and see what is send. If I put it=20
as I said, I will see following

Scheduling retransmission 1
refreshing registration username:password@hostname
...

which mean from account box information, Host:Username@Password area!

> =20
>
>>2) I'm running RH90 with alsa (alsa oss included) and in=20
>>options->devices I have /dev/dsp as input *and* output device at all=20
>>positions, and I'm unable to change them!
>>   =20
>>
>
>Can someone with multiple sound cards check on this?  I only have one li=
nux box
>with a sound card in it, and it only has one sound card.
> =20
>
Misunderstanding: I don't have 2 sound cards, just one. Saying alsa oss=20
included mean that oss-alsa modules are installed. So, as iaxcomm is not=20
able to work with alsa drivers, I should find for input an microphone=20
entry. I know that my installation is ok as I use GnomeMeeting (H323)=20
all days, in alsa or alsa-oss emulation.

> =20
>
>>3) in address book, choosing a ring tone for an entry and asking previe=
w=20
>>give a segfault. In general references it's ok
>>   =20
>>
>
>Can anyone else duplicate this?  I only have one linux box upon which to=
 test
>this, but it works fine.
> =20
>
>>Thanks for comments
>>   =20
>>
>
>I'm sorry I couldn't give you better info at this point.  Maybe someone =
else has
>sokme ideas.
> =20
>
No problem. I know it's not easy ;-) BTW, are there some .deb packages=20
(SID)?

--=20
daniel

daniel huhardeaux wrote:

> Michael Van Donselaar a écrit :
>
>> Good morning, Daniel
>>
>> On Fri, 16 Apr 2004 14:35:01 +0200, daniel huhardeaux 
>> <de...@to...> wrote:
>>
>>> 2) I'm running RH90 with alsa (alsa oss included) and in 
>>> options->devices I have /dev/dsp as input *and* output device at all 
>>> positions, and I'm unable to change them!
>>>   
>>
>>
>> Can someone with multiple sound cards check on this?  I only have one 
>> linux box
>> with a sound card in it, and it only has one sound card.
>>  
>>
> Misunderstanding: I don't have 2 sound cards, just one. Saying alsa 
> oss included mean that oss-alsa modules are installed. So, as iaxcomm 
> is not able to work with alsa drivers, I should find for input an 
> microphone entry. I know that my installation is ok as I use 
> GnomeMeeting (H323) all days, in alsa or alsa-oss emulation.

The "device" selection just lets you choose the audio device (a.k.a. 
chipset or soundcard) to use for audio; if you had more than one device 
(i.e. two or more soundcards, USB audio devices, etc), you could choose 
amongst them.  Selecting an actual input source from the device's mixer 
isn't presently part of iaxclient;  for Alsa, I use gnome-alsamixer..

-SteveK

> No problem. I know it's not easy ;-) BTW, are there some .deb packages 
> (SID)?

No, but it works OK under Debian (that's what I'm using these days; but 
I wish there was a wxrc package for debian.  you get so spoiled by 
debian..).

-SteveK

On Fri, 16 Apr 2004 16:35:08 +0200, daniel huhardeaux <de...@to...> =
wrote:

>Michael Van Donselaar a =E9crit :
>
>>Good morning, Daniel
>>
>>On Fri, 16 Apr 2004 14:35:01 +0200, daniel huhardeaux =
<de...@to...> wrote:
>>
>> =20
>>
>>>hi list,
>>>
>>>I try to play around iaxcomm PRE CVS 28/02/2004 and face some =
problems.
>>>
>>>1) in options->account seems that lable of zone are not correct (host=20
>>>means username area, username means password, password and confirm=20
>>>password are host)
>>>   =20
>>>
>>
>>Do you mean that the Options/Accounts dialog box (with window title =
"Manage
>>Accounts") reflects different information than what you entered in the =
Add
>>Account window?
>>
>>I cant duplicate this.  I just downloaded it and cleared out my reg =
info on a
>>fairly standard RH9 box.
>> =20
>>
>Yes. I'm running iaxcomm in terminal and see what is send. If I put it=20
>as I said, I will see following
>
>Scheduling retransmission 1
>refreshing registration username:password@hostname

Aaahh.  I never noticed that.  It looks like it's saying

    refreshing registration username:password@hostname

but according to the the iaxclient_lib.c code, it is *really* printing

    refreshing registration hostname:username@password

So, everything is OK. (You might want to double check at the asterisk =
console by
doing an "iax2 debug")

Steve Kann:  maybe we should change the debug info=20

    refreshing registration username:password@hostname

>...
>
>which mean from account box information, Host:Username@Password area!
>
>> =20
>>
>>>2) I'm running RH90 with alsa (alsa oss included) and in=20
>>>options->devices I have /dev/dsp as input *and* output device at all=20
>>>positions, and I'm unable to change them!
>>>   =20
>>>
>>
>>Can someone with multiple sound cards check on this?  I only have one =
linux box
>>with a sound card in it, and it only has one sound card.
>> =20
>>
>Misunderstanding: I don't have 2 sound cards, just one. Saying alsa oss=20
>included mean that oss-alsa modules are installed. So, as iaxcomm is not=
=20
>able to work with alsa drivers, I should find for input an microphone=20
>entry. I know that my installation is ok as I use GnomeMeeting (H323)=20
>all days, in alsa or alsa-oss emulation.
>

OK

>> =20
>>
>>>3) in address book, choosing a ring tone for an entry and asking =
preview=20
>>>give a segfault. In general references it's ok
>>>   =20
>>>
>>
>>Can anyone else duplicate this?  I only have one linux box upon which =
to test
>>this, but it works fine.
>> =20
>>
>>>Thanks for comments
>>>   =20
>>>
>>
>>I'm sorry I couldn't give you better info at this point.  Maybe someone=
 else has
>>sokme ideas.
>> =20
>>
>No problem. I know it's not easy ;-) BTW, are there some .deb packages=20
>(SID)?

I don't have a debian machine to build them.  I'd be happy to put any =
user
contributed packages on the iaxcomm web page.

(I'd even put up any precompiled *BSD packages, bigotry notwithstanding)

Michael Van Donselaar a =E9crit :

> [...]
>
>Aaahh.  I never noticed that.  It looks like it's saying
>
>    refreshing registration username:password@hostname
>
>but according to the the iaxclient_lib.c code, it is *really* printing
>
>    refreshing registration hostname:username@password
>
>So, everything is OK. (You might want to double check at the asterisk co=
nsole by
>doing an "iax2 debug")
>
>Steve Kann:  maybe we should change the debug info=20
>
>    refreshing registration username:password@hostname
> =20
>
Ok. So what you tell me that account configuration is ok, it's only the=20
display. Ok. IAX2 show me effectively my good username putting=20
everything in order ;-) Thanks.

> =20
>
>>...
>>
>>which mean from account box information, Host:Username@Password area!
>>
>>   =20
>>
>>>=20
>>>
>>>     =20
>>>
>>>>2) I'm running RH90 with alsa (alsa oss included) and in=20
>>>>options->devices I have /dev/dsp as input *and* output device at all=20
>>>>positions, and I'm unable to change them!
>>>>  =20
>>>>
>>>>       =20
>>>>
>>>Can someone with multiple sound cards check on this?  I only have one =
linux box
>>>with a sound card in it, and it only has one sound card.
>>>=20
>>>
>>>     =20
>>>
>>Misunderstanding: I don't have 2 sound cards, just one. Saying alsa oss=
=20
>>included mean that oss-alsa modules are installed. So, as iaxcomm is no=
t=20
>>able to work with alsa drivers, I should find for input an microphone=20
>>entry. I know that my installation is ok as I use GnomeMeeting (H323)=20
>>all days, in alsa or alsa-oss emulation.
>>   =20
>>
If I have input=3D/dev/dsp and output=3D/dev/dsp in my preferences, is th=
is=20
setup ok? I have doubt about this, I was thinking I should have=20
different entry for input and output

Other, is there a po for translation? or is english hard coded? Where=20
should I look for this matter?

Thanks for your help.

--=20
Daniel

Michael Van Donselaar wrote:

>On Fri, 16 Apr 2004 16:35:08 +0200, daniel huhardeaux <de...@to...> wrote:
>
>  
>
>>Michael Van Donselaar a écrit :
>>
>>    
>>
>>>Good morning, Daniel
>>>
>>>On Fri, 16 Apr 2004 14:35:01 +0200, daniel huhardeaux <de...@to...> wrote:
>>>
>>> 
>>>
>>>      
>>>
>>>>hi list,
>>>>
>>>>I try to play around iaxcomm PRE CVS 28/02/2004 and face some problems.
>>>>
>>>>1) in options->account seems that lable of zone are not correct (host 
>>>>means username area, username means password, password and confirm 
>>>>password are host)
>>>>   
>>>>
>>>>        
>>>>
>>>Do you mean that the Options/Accounts dialog box (with window title "Manage
>>>Accounts") reflects different information than what you entered in the Add
>>>Account window?
>>>
>>>I cant duplicate this.  I just downloaded it and cleared out my reg info on a
>>>fairly standard RH9 box.
>>> 
>>>
>>>      
>>>
>>Yes. I'm running iaxcomm in terminal and see what is send. If I put it 
>>as I said, I will see following
>>
>>Scheduling retransmission 1
>>refreshing registration username:password@hostname
>>    
>>
>
>Aaahh.  I never noticed that.  It looks like it's saying
>
>    refreshing registration username:password@hostname
>
>but according to the the iaxclient_lib.c code, it is *really* printing
>
>    refreshing registration hostname:username@password
>
>So, everything is OK. (You might want to double check at the asterisk console by
>doing an "iax2 debug")
>
>Steve Kann:  maybe we should change the debug info 
>
>    refreshing registration username:password@hostname
>  
>

Done.

msvc2005 projects for iaxcomm
assumes c:\wxWidgets-2.8.6

steve
Hi Steve,

On Fri, Apr 4, 2008 at 2:16 PM, stevebvt <ste...@gm...> wrote:
> msvc2005 projects for iaxcomm
>  assumes c:\wxWidgets-2.8.6

These are a good start. Where in the source tree do you think these
should go? Would it make sense to add this iaxcomm.vcproj to the
existing iaxclient.sln? We already build testcall and vtestcall with
that solution.

Also, unified diffs would be appreciated (diff -u or even better diff
-ur from the top of the source tree).

Pete

You're correct.  Ringing is not yet implemented.

-SteveK

Biagio Passaro wrote:

> -->
>
> I'am just installed the very nice iaxcomm client, but I'am not able 
> set the ring options, it does not ring !
>
> It seams not implemented. is anyone can help me on this?
>
>  
>
> Many thanks
>
>  
>
> Biagio
>
>  
>

Could you please tell me how can I use with 'callto' tag with iaxcomm?

any ideas?

mack_jpn

plese check results...

starting iaxcomm and double click task icon.

maybe iaxcomm will be exit that process.

any ideas?

mack_jpn

Thread: [Iaxclient-devel] iaxcomm

iaxclient-devel