Re: [Hypercontent-users] Re: FTP problem in 1.4
Brought to you by:
alexvigdor
Menu
▾
▴
Re: [Hypercontent-users] Re: FTP problem in 1.4
|
From: Alex V. <av...@co...> - 2006-05-03 13:41:28
|
Hi Carl, The main pieces would be the ftp library (webapp/WEB-INF/lib/ edtftpj-1.5.1.jar) and from the filesystem package BaseFilesystem, RemoteFileSystemImpl, FTPUnixFileSystemImpl, and possibly FTPFileDataLoader and SFTPFileSystemImpl as well. Cheers, Alex On May 3, 2006, at 9:25 AM, Carl Barrow wrote: > Hi Alex, > > I can FTP to that server using HC2 without any problems. How would > I go about backporting the code from HC2? > > Cheers, > Carl > > Alex Vigdor wrote: >> Hi Carl, >> There have been some updates to both the backing FTP library >> and the code that glues it in for HC2, so it may be worth testing >> a publish to that server from HC2 to see if it works; the updated >> code should be compatible with a broader range of FTP servers. If >> that works and you need to get it working in 1.4, the next step >> would be to backport the changes. If that doesn't work, you may >> need to send me a login off list so I can run it through a degugger. >> >> Cheers, >> Alex >> >> On May 2, 2006, at 6:40 AM, Carl Barrow wrote: >> >>> Hi Alex, >>> >>> Have the seen the problem detailed below before? >>> >>> Cheers >>> Carl >>> >>> -------- Original Message -------- >>> Subject: RE: publishing from HyperContent to scarborough >>> Date: Tue, 2 May 2006 11:29:52 +0100 >>> From: Daniel Wiggle <d.w...@hu...> >>> To: Carl Barrow <C.P...@hu...> >>> >>> >>> >>> Hi Carl, >>> >>> Thanks for the address. However, when I passed it along to Phil >>> who runs >>> the server here, he observed that the 150.237.16 range was >>> already set >>> to be allowed to connect, so he hasn't actually changed anything >>> in the >>> end. >>> >>> So, I've had a go at getting HyperContent to publish to our >>> server and >>> have hit a bit of a wall unfortunately. I re-configured the 'build' >>> settings for the site to point to the server here and when I try to >>> build a page from within the project I get the error message as >>> shown on >>> the attached screenshot. Looking at the FTP logs for the server >>> here, I >>> can see the HyperContent server connecting successfully but then not >>> doing anything else at all (although the log doesn't seem to include >>> actions such as listing files in a directory). >>> >>> The error message about index.xml not being found is puzzling - >>> index.xml should never exist on the server hosting the published >>> site >>> should it? I've not changed anything else so index.xml in the CMS >>> repository (where it should be looking for it) should still be where >>> it's always been. As I understood it, I thought the 'build' >>> settings in >>> the project definition were simply FTP settings for where >>> HyperContent >>> should dump the output it generates. If this is the case, I'm >>> afraid I'm >>> not sure what's going on! >>> >>> Anyway, sorry to have to come back to you so soon with it, but any >>> chance you've any ideas about what's happening? >>> >>> Cheers, >>> Dan >>> >>> -----Original Message----- >>> From: Carl Barrow [mailto:C.P...@hu...] Sent: 27 April >>> 2006 10:40 >>> To: Daniel Wiggle >>> Subject: Re: publishing from HyperContent to scarborough >>> >>> Hi Dan, >>> >>> That would be why I could never get the system to ftp up there. >>> The IP address for the server running HyperContent is 150.237.16. >>> 34 >>> >>> Cheers >>> Carl >>> >>> Daniel Wiggle wrote: >>>> >>>> Hi Carl, >>>> >>>> I'm going to have a go at configuring the Scarborough campus >>>> site to publish to one of our servers here but am told the >>>> server here refuses >>> >>>> access to non-recognised IP addresses. Do you know what the IP >>>> address >>> >>>> is of the server that would be copying files to a Scarborough- >>>> based server when I publish from HyperContent? If I was to guess >>>> I'd go for the Portal address of 150.237.16.10 but I'm not sure >>>> if that's right or not. >>>> >>>> I'll just have a play around and see if I can make it work and >>>> if so then I'll be back in touch to arrange removing the Hull- >>>> hosted pages and putting in place a redirection page instead. >>>> >>>> Cheers, >>>> Dan >>>> >>> >>> --************************************ >>> >>> Carl Barrow >>> Systems Integrator >>> e-Services >>> The University of Hull >>> Cottingham Road >>> Hull >>> HU6 7RX >>> Ext. 6838 >>> ************************************ >>> >>> >>> >>> >>> >>> >>> --************************************ >>> >>> Carl Barrow >>> Systems Integrator >>> e-Services >>> The University of Hull >>> Cottingham Road >>> Hull >>> HU6 7RX >>> Ext. 6838 >>> ************************************ >>> >>> <cmsBuildError.JPG> >>> ******************************************************************** >>> ********************* >>> To view the terms under which this email is distributed, please >>> go to http://www.hull.ac.uk/legal/email_disclaimer.html >>> ******************************************************************** >>> ********************* >> >> >> >> ------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, >> security? >> Get stuff done quickly with pre-integrated technology to make your >> job easier >> Download IBM WebSphere Application Server v.1.0.1 based on Apache >> Geronimo >> http://sel.as-us.falkag.net/sel? >> cmd=lnk&kid=120709&bid=263057&dat=121642 >> _______________________________________________ >> Hypercontent-users mailing list >> Hyp...@li... >> https://lists.sourceforge.net/lists/listinfo/hypercontent-users > > -- > ************************************ > > Carl Barrow > Systems Integrator > e-Services > The University of Hull > Cottingham Road > Hull > HU6 7RX > Ext. 6838 > ************************************ > > ********************************************************************** > ******************* > To view the terms under which this email is distributed, please go > to http://www.hull.ac.uk/legal/email_disclaimer.html > ********************************************************************** > ******************* |
