Re: [Hypercontent-users] Re: FTP problem in 1.4
Brought to you by:
alexvigdor
Menu
▾
▴
Re: [Hypercontent-users] Re: FTP problem in 1.4
|
From: Carl B. <C.P...@hu...> - 2006-05-03 13:26:06
|
Hi Alex, I can FTP to that server using HC2 without any problems. How would I go about backporting the code from HC2? Cheers, Carl Alex Vigdor wrote: > Hi Carl, > There have been some updates to both the backing FTP library and > the code that glues it in for HC2, so it may be worth testing a > publish to that server from HC2 to see if it works; the updated code > should be compatible with a broader range of FTP servers. If that > works and you need to get it working in 1.4, the next step would be to > backport the changes. If that doesn't work, you may need to send me a > login off list so I can run it through a degugger. > > Cheers, > Alex > > On May 2, 2006, at 6:40 AM, Carl Barrow wrote: > >> Hi Alex, >> >> Have the seen the problem detailed below before? >> >> Cheers >> Carl >> >> -------- Original Message -------- >> Subject: RE: publishing from HyperContent to scarborough >> Date: Tue, 2 May 2006 11:29:52 +0100 >> From: Daniel Wiggle <d.w...@hu...> >> To: Carl Barrow <C.P...@hu...> >> >> >> >> Hi Carl, >> >> Thanks for the address. However, when I passed it along to Phil who runs >> the server here, he observed that the 150.237.16 range was already set >> to be allowed to connect, so he hasn't actually changed anything in the >> end. >> >> So, I've had a go at getting HyperContent to publish to our server and >> have hit a bit of a wall unfortunately. I re-configured the 'build' >> settings for the site to point to the server here and when I try to >> build a page from within the project I get the error message as shown on >> the attached screenshot. Looking at the FTP logs for the server here, I >> can see the HyperContent server connecting successfully but then not >> doing anything else at all (although the log doesn't seem to include >> actions such as listing files in a directory). >> >> The error message about index.xml not being found is puzzling - >> index.xml should never exist on the server hosting the published site >> should it? I've not changed anything else so index.xml in the CMS >> repository (where it should be looking for it) should still be where >> it's always been. As I understood it, I thought the 'build' settings in >> the project definition were simply FTP settings for where HyperContent >> should dump the output it generates. If this is the case, I'm afraid I'm >> not sure what's going on! >> >> Anyway, sorry to have to come back to you so soon with it, but any >> chance you've any ideas about what's happening? >> >> Cheers, >> Dan >> >> -----Original Message----- >> From: Carl Barrow [mailto:C.P...@hu...] Sent: 27 April 2006 >> 10:40 >> To: Daniel Wiggle >> Subject: Re: publishing from HyperContent to scarborough >> >> Hi Dan, >> >> That would be why I could never get the system to ftp up there. The >> IP address for the server running HyperContent is 150.237.16. >> 34 >> >> Cheers >> Carl >> >> Daniel Wiggle wrote: >>> >>> Hi Carl, >>> >>> I'm going to have a go at configuring the Scarborough campus site to >>> publish to one of our servers here but am told the server here refuses >> >>> access to non-recognised IP addresses. Do you know what the IP address >> >>> is of the server that would be copying files to a Scarborough-based >>> server when I publish from HyperContent? If I was to guess I'd go >>> for the Portal address of 150.237.16.10 but I'm not sure if that's >>> right or not. >>> >>> I'll just have a play around and see if I can make it work and if so >>> then I'll be back in touch to arrange removing the Hull-hosted pages >>> and putting in place a redirection page instead. >>> >>> Cheers, >>> Dan >>> >> >> --************************************ >> >> Carl Barrow >> Systems Integrator >> e-Services >> The University of Hull >> Cottingham Road >> Hull >> HU6 7RX >> Ext. 6838 >> ************************************ >> >> >> >> >> >> >> --************************************ >> >> Carl Barrow >> Systems Integrator >> e-Services >> The University of Hull >> Cottingham Road >> Hull >> HU6 7RX >> Ext. 6838 >> ************************************ >> >> <cmsBuildError.JPG> >> ***************************************************************************************** >> >> To view the terms under which this email is distributed, please go to >> http://www.hull.ac.uk/legal/email_disclaimer.html >> ***************************************************************************************** >> > > > > ------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache > Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Hypercontent-users mailing list > Hyp...@li... > https://lists.sourceforge.net/lists/listinfo/hypercontent-users -- ************************************ Carl Barrow Systems Integrator e-Services The University of Hull Cottingham Road Hull HU6 7RX Ext. 6838 ************************************ ***************************************************************************************** To view the terms under which this email is distributed, please go to http://www.hull.ac.uk/legal/email_disclaimer.html ***************************************************************************************** |
