[Hypercontent-users] Re: FTP problem in 1.4

[Alex V. <av...@co...>]

Hi Carl,
	There have been some updates to both the backing FTP library and the  
code that glues it in for HC2, so it may be worth testing a publish  
to that server from HC2 to see if it works; the updated code should  
be compatible with a broader range of FTP servers.  If that works and  
you need to get it working in 1.4, the next step would be to backport  
the changes.  If that doesn't work, you may need to send me a login  
off list so I can run it through a degugger.

Cheers,
Alex

On May 2, 2006, at 6:40 AM, Carl Barrow wrote:

> Hi Alex,
>
> Have the seen the problem detailed below before?
>
> Cheers
> Carl
>
> -------- Original Message --------
> Subject: 	RE: publishing from HyperContent to scarborough
> Date: 	Tue, 2 May 2006 11:29:52 +0100
> From: 	Daniel Wiggle <d.w...@hu...>
> To: 	Carl Barrow <C.P...@hu...>
>
>
>
> Hi Carl,
>
> Thanks for the address. However, when I passed it along to Phil who  
> runs
> the server here, he observed that the 150.237.16 range was already set
> to be allowed to connect, so he hasn't actually changed anything in  
> the
> end.
>
> So, I've had a go at getting HyperContent to publish to our server and
> have hit a bit of a wall unfortunately. I re-configured the 'build'
> settings for the site to point to the server here and when I try to
> build a page from within the project I get the error message as  
> shown on
> the attached screenshot. Looking at the FTP logs for the server  
> here, I
> can see the HyperContent server connecting successfully but then not
> doing anything else at all (although the log doesn't seem to include
> actions such as listing files in a directory).
>
> The error message about index.xml not being found is puzzling -
> index.xml should never exist on the server hosting the published site
> should it? I've not changed anything else so index.xml in the CMS
> repository (where it should be looking for it) should still be where
> it's always been. As I understood it, I thought the 'build'  
> settings in
> the project definition were simply FTP settings for where HyperContent
> should dump the output it generates. If this is the case, I'm  
> afraid I'm
> not sure what's going on!
>
> Anyway, sorry to have to come back to you so soon with it, but any
> chance you've any ideas about what's happening?
>
> Cheers,
> Dan
>
> -----Original Message-----
> From: Carl Barrow [mailto:C.P...@hu...] Sent: 27 April  
> 2006 10:40
> To: Daniel Wiggle
> Subject: Re: publishing from HyperContent to scarborough
>
> Hi Dan,
>
> That would be why I could never get the system to ftp up there. The  
> IP address for the server running HyperContent is 150.237.16.
> 34
>
> Cheers
> Carl
>
> Daniel Wiggle wrote:
>>
>> Hi Carl,
>>
>> I'm going to have a go at configuring the Scarborough campus site  
>> to publish to one of our servers here but am told the server here  
>> refuses
>
>> access to non-recognised IP addresses. Do you know what the IP  
>> address
>
>> is of the server that would be copying files to a Scarborough- 
>> based server when I publish from HyperContent? If I was to guess  
>> I'd go for the Portal address of 150.237.16.10 but I'm not sure if  
>> that's right or not.
>>
>> I'll just have a play around and see if I can make it work and if  
>> so then I'll be back in touch to arrange removing the Hull-hosted  
>> pages and putting in place a redirection page instead.
>>
>> Cheers,
>> Dan
>>
>
> -- 
> ************************************
>
> Carl Barrow
> Systems Integrator
> e-Services
> The University of Hull
> Cottingham Road
> Hull
> HU6 7RX
> Ext. 6838
> ************************************
>
>
>
>
>
>
> -- 
> ************************************
>
> Carl Barrow
> Systems Integrator
> e-Services
> The University of Hull
> Cottingham Road
> Hull
> HU6 7RX
> Ext. 6838
> ************************************
>
> <cmsBuildError.JPG>
> ********************************************************************** 
> *******************
> To view the terms under which this email is distributed, please go  
> to http://www.hull.ac.uk/legal/email_disclaimer.html
> ********************************************************************** 
> *******************