From: Lachlan A. <lh...@us...> - 2004-05-29 04:01:38
|
Greetings all, In preparation for 3.2.0b6 (due on Monday 31 May), I have uploaded a tarball to <http://www.htdig.org/files/htdig-3.2.0b6.tgz>. Could people please test it, especially on non-linux systems? I will be away from my computer for the next couple of weeks, so could someone else please finish the release process (announce, tag CVS, make diffs)? For the release announcement, I was thinking about something like: The next beta release of ht://Dig, 3.2.0b6, is now available. It fixes several bugs from 3.2.0b5, and runs somewhat faster, although still much slower than 3.1.6. (No significant speed improvements are expected in the near future, although we are working on it.) Calling this release a "beta" simply means that exhausive testing, especially on non-Linux platforms, is not yet complete. However, we consider it stable enough for most production use. Thanks all, Lachlan -- lh...@us... ht://Dig developer DownUnder (http://www.htdig.org) |
From: Gabriele B. <g.b...@co...> - 2004-05-31 08:01:17
|
Hi Lachlan, I volounteer to release it. Thanks for your work and commitment, Lachlan. -Gabriele Il sab, 2004-05-29 alle 06:00, Lachlan Andrew ha scritto: > Greetings all, > > In preparation for 3.2.0b6 (due on Monday 31 May), I have uploaded a > tarball to <http://www.htdig.org/files/htdig-3.2.0b6.tgz>. Could > people please test it, especially on non-linux systems? > > I will be away from my computer for the next couple of weeks, so could > someone else please finish the release process (announce, tag CVS, > make diffs)? For the release announcement, I was thinking about > something like: > > > The next beta release of ht://Dig, 3.2.0b6, is now available. It > fixes several bugs from 3.2.0b5, and runs somewhat faster, although > still much slower than 3.1.6. (No significant speed improvements are > expected in the near future, although we are working on it.) Calling > this release a "beta" simply means that exhausive testing, especially > on non-Linux platforms, is not yet complete. However, we consider it > stable enough for most production use. > > > Thanks all, > Lachlan |
From: J. op d. B. <ht...@op...> - 2004-06-03 07:41:58
|
HP-UX chaos B.10.20 U 9000/800 2004964319 unlimited-user license hppa2.0-hp-hpux10.20 gcc 2.8.1 make 3.78 bash 2.03 configure works, zlib compression compiled, but not used and no shared libs make works make check fails (!!) make install works rundig works (only 1000 pages tested), no external parsers configured htsearch works ./configure --disable-bigfile --prefix=/opt/htdig/htdig32 --with-config-dir=/opt/htdig/htdig32/conf --with-common-dir=/opt/htdig/htdig32/common --with-database-dir=/opt/htdig/htdig32/db --with-default-config-file=/opt/htdig/htdig32/conf/htdig.conf --with-cgi-bin-dir=/opt/htdig/htdig32/cgi-bin --with-image-dir=/opt/htdig/htdig32/images --with-search-dir=/opt/htdig/htdig32/htdocs --with-image-url-prefix=/htdig/images --with-search-form=search.html --with-apache=/pers/www/msql/Projects/Htdig/apache/httpd --with-zlib=/opt/htdig/lib/zlib --enable-tests --disable-shared builld and rundig log available. --jesse Lachlan Andrew wrote: >Greetings all, > >In preparation for 3.2.0b6 (due on Monday 31 May), I have uploaded a >tarball to <http://www.htdig.org/files/htdig-3.2.0b6.tgz>. Could >people please test it, especially on non-linux systems? > > > |
From: <lac...@ip...> - 2004-06-03 07:53:06
|
Greetings Jesse, Thanks for that. Is this the system that had problems with 3.2.0b5? If so, it is very good to hear that it runs b6! Is there a reason for not using zlib compression? Could you post the results from make check ? Thanks again, Lachlan >From: "J. op den Brouw" <ht...@op...> >HP-UX chaos B.10.20 U 9000/800 2004964319 unlimited-user license >hppa2.0-hp-hpux10.20 >gcc 2.8.1 >make 3.78 >bash 2.03 > >configure works, zlib compression compiled, but not used and no shared libs >make works >make check fails (!!) >make install works >rundig works (only 1000 pages tested), no external parsers configured >htsearch works > >builld and rundig log available. > >--jesse |
From: J. op d. B. <ht...@op...> - 2004-06-03 08:01:36
|
AFIAK, b5 had the same problem with make check and some issue about select() but I can't remember. b6 definitely doesn't have the select() problem. zlib not used is historical, dated back in the b4 series (it didn't work then). it's the WordType::instance thing again........... [msql@chaos htdig-3.2.0b6]$ make check Making check in db make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db' Making check in htlib make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib' Making check in htword make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword' Making check in htcommon make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon' make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon' Making check in htnet make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet' Making check in htfuzzy make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy' Making check in htdb make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb' Making check in htdig make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig' Making check in htsearch make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch' Making check in httools make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools' Making check in installdir make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir' Making check in include make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include' Making check in htdoc make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc' Making check in test make[1]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' make MAKE="make" word dbbench txt2mifluz search testnet document url make[2]: Entering directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' g++ -DHAVE_CONFIG_H -I. -I. -I../include -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" -I../include -I../htlib -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti -fno-exceptions -c -o word.o `test -f 'word.cc' || echo './'`word.cc /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti -fno-exceptions -L/opt/htdig/lib/zlib/lib -o word word.o ../htne t/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtword.l a ../db/libhtdb.la ../htlib/libht.la -lz mkdir .libs g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o word word.o -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon/.li bs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz g++ -DHAVE_CONFIG_H -I. -I. -I../include -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" -I../include -I../htlib -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti -fno-exceptions -c -o dbbench.o `test -f 'dbbench.cc' || echo './'`dbbench.cc /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti -fno-exceptions -L/opt/htdig/lib/zlib/lib -o dbbench dbbench.o . ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht word.la ../db/libhtdb.la ../htlib/libht.la -lz g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o dbbench dbbench.o -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz g++ -DHAVE_CONFIG_H -I. -I. -I../include -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" -I../include -I../htlib -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti -fno-exceptions -c -o txt2mifluz.o `test -f 'txt2mifluz.cc' || echo './'`txt2mifluz.cc /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti -fno-exceptions -L/opt/htdig/lib/zlib/lib -o txt2mifluz txt2mifl uz.o ../htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la ../htword /libhtword.la ../db/libhtdb.la ../htlib/libht.la -lz g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o txt2mifluz txt2mifluz.o -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../ htcommon/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz g++ -DHAVE_CONFIG_H -I. -I. -I../include -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" -I../include -I../htlib -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti -fno-exceptions -c -o search.o `test -f 'search.cc' || echo './'`search.cc /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti -fno-exceptions -L/opt/htdig/lib/zlib/lib -o search search.o ../ htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtwo rd.la ../db/libhtdb.la ../htlib/libht.la -lz g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o search search.o -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon /.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz g++ -DHAVE_CONFIG_H -I. -I. -I../include -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" -I../include -I../htlib -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti -fno-exceptions -c -o testnet.o `test -f 'testnet.cc' || echo './'`testnet.cc /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti -fno-exceptions -L/opt/htdig/lib/zlib/lib -o testnet testnet.o . ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht word.la ../db/libhtdb.la ../htlib/libht.la -lz g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz collect2: ld returned 1 exit status /usr/ccs/bin/ld: Unsatisfied symbols: WordType::instance (data) make[2]: *** [testnet] Error 1 make[2]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' make[1]: *** [check-am] Error 2 make[1]: Leaving directory `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' make: *** [check-recursive] Error 1 lac...@ip... wrote: >Greetings Jesse, > >Thanks for that. Is this the system that had problems with 3.2.0b5? If >so, it is very good to hear that it runs b6! Is there a reason for not using >zlib compression? > >Could you post the results from make check ? > >Thanks again, >Lachlan > > > >>From: "J. op den Brouw" <ht...@op...> >> >> > > > >>HP-UX chaos B.10.20 U 9000/800 2004964319 unlimited-user license >>hppa2.0-hp-hpux10.20 >>gcc 2.8.1 >>make 3.78 >>bash 2.03 >> >>configure works, zlib compression compiled, but not used and no shared libs >>make works >>make check fails (!!) >>make install works >>rundig works (only 1000 pages tested), no external parsers configured >>htsearch works >> >>builld and rundig log available. >> >>--jesse >> >> |
From: Gabriele B. <g.b...@co...> - 2004-06-03 08:58:23
|
Hi Jesse, I slightly changed Lachlan's release, updating also the configure scripts. You can find the new files here: http://www.htdig.org/files/ Sorry, but I believe that updating autotools scripts would be more appropriate for a new release. Ciao, -Gabriele I have upgraded the configure scripts Il gio, 2004-06-03 alle 10:02, J. op den Brouw ha scritto: > AFIAK, b5 had the same problem with make check and some issue about select() > but I can't remember. b6 definitely doesn't have the select() problem. > zlib not used is historical, dated back in the b4 series (it didn't work > then). > it's the WordType::instance thing again........... > > [msql@chaos htdig-3.2.0b6]$ make check > Making check in db > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db' > Making check in htlib > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib' > Making check in htword > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword' > Making check in htcommon > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon' > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon' > Making check in htnet > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet' > Making check in htfuzzy > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy' > Making check in htdb > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb' > Making check in htdig > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig' > Making check in htsearch > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch' > Making check in httools > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools' > Making check in installdir > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir' > Making check in include > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include' > Making check in htdoc > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc' > make[1]: Nothing to be done for `check'. > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc' > Making check in test > make[1]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' > make MAKE="make" word dbbench txt2mifluz search testnet document url > make[2]: Entering directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' > g++ -DHAVE_CONFIG_H -I. -I. -I../include > -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" > -I../include -I../htlib > -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db > -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti > -fno-exceptions -c -o word.o `test -f 'word.cc' || echo './'`word.cc > /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti > -fno-exceptions -L/opt/htdig/lib/zlib/lib -o word word.o ../htne > t/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la > ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtword.l > a ../db/libhtdb.la ../htlib/libht.la -lz > mkdir .libs > g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o word word.o > -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon/.li > bs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a > ../htlib/.libs/libht.a -lz > g++ -DHAVE_CONFIG_H -I. -I. -I../include > -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" > -I../include -I../htlib > -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db > -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti > -fno-exceptions -c -o dbbench.o `test -f 'dbbench.cc' || echo > './'`dbbench.cc > /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti > -fno-exceptions -L/opt/htdig/lib/zlib/lib -o dbbench dbbench.o . > ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la > ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht > word.la ../db/libhtdb.la ../htlib/libht.la -lz > g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o dbbench dbbench.o > -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm > on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a > ../htlib/.libs/libht.a -lz > g++ -DHAVE_CONFIG_H -I. -I. -I../include > -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" > -I../include -I../htlib > -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db > -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti > -fno-exceptions -c -o txt2mifluz.o `test -f 'txt2mifluz.cc' || echo > './'`txt2mifluz.cc > /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti > -fno-exceptions -L/opt/htdig/lib/zlib/lib -o txt2mifluz txt2mifl > uz.o ../htnet/libhtnet.la ../htcommon/libcommon.la > ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la ../htword > /libhtword.la ../db/libhtdb.la ../htlib/libht.la -lz > g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o txt2mifluz txt2mifluz.o > -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../ > htcommon/.libs/libcommon.a ../htword/.libs/libhtword.a > ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz > g++ -DHAVE_CONFIG_H -I. -I. -I../include > -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" > -I../include -I../htlib > -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db > -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti > -fno-exceptions -c -o search.o `test -f 'search.cc' || echo './'`search.cc > /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti > -fno-exceptions -L/opt/htdig/lib/zlib/lib -o search search.o ../ > htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la > ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtwo > rd.la ../db/libhtdb.la ../htlib/libht.la -lz > g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o search search.o > -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon > /.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a > ../htlib/.libs/libht.a -lz > g++ -DHAVE_CONFIG_H -I. -I. -I../include > -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" > -I../include -I../htlib > -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db > -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti > -fno-exceptions -c -o testnet.o `test -f 'testnet.cc' || echo > './'`testnet.cc > /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti > -fno-exceptions -L/opt/htdig/lib/zlib/lib -o testnet testnet.o . > ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la > ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht > word.la ../db/libhtdb.la ../htlib/libht.la -lz > g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o > -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm > on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a > ../htlib/.libs/libht.a -lz > collect2: ld returned 1 exit status > /usr/ccs/bin/ld: Unsatisfied symbols: > WordType::instance (data) > make[2]: *** [testnet] Error 1 > make[2]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' > make[1]: *** [check-am] Error 2 > make[1]: Leaving directory > `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' > make: *** [check-recursive] Error 1 > > lac...@ip... wrote: > > >Greetings Jesse, > > > >Thanks for that. Is this the system that had problems with 3.2.0b5? If > >so, it is very good to hear that it runs b6! Is there a reason for not using > >zlib compression? > > > >Could you post the results from make check ? > > > >Thanks again, > >Lachlan > > > > > > > >>From: "J. op den Brouw" <ht...@op...> > >> > >> > > > > > > > >>HP-UX chaos B.10.20 U 9000/800 2004964319 unlimited-user license > >>hppa2.0-hp-hpux10.20 > >>gcc 2.8.1 > >>make 3.78 > >>bash 2.03 > >> > >>configure works, zlib compression compiled, but not used and no shared libs > >>make works > >>make check fails (!!) > >>make install works > >>rundig works (only 1000 pages tested), no external parsers configured > >>htsearch works > >> > >>builld and rundig log available. > >> > >>--jesse > >> > >> > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by the new InstallShield X. > >From Windows to Linux, servers to mobile, InstallShield X is the one > installation-authoring solution that does it all. Learn more and > evaluate today! http://www.installshield.com/Dev2Dev/0504 > _______________________________________________ > ht://Dig Developer mailing list: > htd...@li... > List information (subscribe/unsubscribe, etc.) > https://lists.sourceforge.net/lists/listinfo/htdig-dev |
From: Ted Stresen-R. <ted...@ma...> - 2004-06-03 10:07:32
|
Hi Gabriele, I just did ./configure, make, make check, and make install with b6. make check said there was nothing to be done for anything. Is that normal? I thought it ran a bunch of tests... After doing the install (with prefix set to /Library/htdig-3.2.0b6) everything, including man pages and all, ended up in the install directory. For some reason, these additional goodies weren't getting installed with b5. I don't know what you've done, but good work on that! I'm not going to test the digging in my speed tests using Lachlan's suggestion for using "time". Back later with some test results. Ted Stresen-Reuter My system: Mac OS X (10.3.4), 768 MB RAM On Jun 3, 2004, at 9:57 AM, Gabriele Bartolini wrote: > Hi Jesse, > > I slightly changed Lachlan's release, updating also the configure > scripts. You can find the new files here: http://www.htdig.org/files/ > > Sorry, but I believe that updating autotools scripts would be more > appropriate for a new release. > > Ciao, > -Gabriele > > I have upgraded the configure scripts > Il gio, 2004-06-03 alle 10:02, J. op den Brouw ha scritto: >> AFIAK, b5 had the same problem with make check and some issue about >> select() >> but I can't remember. b6 definitely doesn't have the select() problem. >> zlib not used is historical, dated back in the b4 series (it didn't >> work >> then). >> it's the WordType::instance thing again........... >> >> [msql@chaos htdig-3.2.0b6]$ make check >> Making check in db >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db' >> Making check in htlib >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib' >> Making check in htword >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword' >> Making check in htcommon >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon' >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon' >> Making check in htnet >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet' >> Making check in htfuzzy >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy' >> Making check in htdb >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb' >> Making check in htdig >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig' >> Making check in htsearch >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch' >> Making check in httools >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools' >> Making check in installdir >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir' >> Making check in include >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include' >> Making check in htdoc >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc' >> make[1]: Nothing to be done for `check'. >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc' >> Making check in test >> make[1]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' >> make MAKE="make" word dbbench txt2mifluz search testnet document url >> make[2]: Entering directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' >> g++ -DHAVE_CONFIG_H -I. -I. -I../include >> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" >> -I../include -I../htlib >> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db >> -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti >> -fno-exceptions -c -o word.o `test -f 'word.cc' || echo './'`word.cc >> /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti >> -fno-exceptions -L/opt/htdig/lib/zlib/lib -o word word.o ../htne >> t/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la >> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtword.l >> a ../db/libhtdb.la ../htlib/libht.la -lz >> mkdir .libs >> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o word word.o >> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon/.li >> bs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a >> ../htlib/.libs/libht.a -lz >> g++ -DHAVE_CONFIG_H -I. -I. -I../include >> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" >> -I../include -I../htlib >> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db >> -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti >> -fno-exceptions -c -o dbbench.o `test -f 'dbbench.cc' || echo >> './'`dbbench.cc >> /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti >> -fno-exceptions -L/opt/htdig/lib/zlib/lib -o dbbench dbbench.o . >> ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la >> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht >> word.la ../db/libhtdb.la ../htlib/libht.la -lz >> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o dbbench dbbench.o >> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm >> on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a >> ../htlib/.libs/libht.a -lz >> g++ -DHAVE_CONFIG_H -I. -I. -I../include >> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" >> -I../include -I../htlib >> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db >> -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti >> -fno-exceptions -c -o txt2mifluz.o `test -f 'txt2mifluz.cc' || echo >> './'`txt2mifluz.cc >> /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti >> -fno-exceptions -L/opt/htdig/lib/zlib/lib -o txt2mifluz txt2mifl >> uz.o ../htnet/libhtnet.la ../htcommon/libcommon.la >> ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la >> ../htword >> /libhtword.la ../db/libhtdb.la ../htlib/libht.la -lz >> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o txt2mifluz txt2mifluz.o >> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../ >> htcommon/.libs/libcommon.a ../htword/.libs/libhtword.a >> ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz >> g++ -DHAVE_CONFIG_H -I. -I. -I../include >> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" >> -I../include -I../htlib >> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db >> -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti >> -fno-exceptions -c -o search.o `test -f 'search.cc' || echo >> './'`search.cc >> /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti >> -fno-exceptions -L/opt/htdig/lib/zlib/lib -o search search.o ../ >> htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la >> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtwo >> rd.la ../db/libhtdb.la ../htlib/libht.la -lz >> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o search search.o >> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon >> /.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a >> ../htlib/.libs/libht.a -lz >> g++ -DHAVE_CONFIG_H -I. -I. -I../include >> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\" >> -I../include -I../htlib >> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db >> -I/opt/htdig/lib/zlib/include -g -O2 -Wall -fno-rtti >> -fno-exceptions -c -o testnet.o `test -f 'testnet.cc' || echo >> './'`testnet.cc >> /bin/sh ../libtool --mode=link g++ -g -O2 -Wall -fno-rtti >> -fno-exceptions -L/opt/htdig/lib/zlib/lib -o testnet testnet.o . >> ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la >> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht >> word.la ../db/libhtdb.la ../htlib/libht.la -lz >> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o >> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm >> on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a >> ../htlib/.libs/libht.a -lz >> collect2: ld returned 1 exit status >> /usr/ccs/bin/ld: Unsatisfied symbols: >> WordType::instance (data) >> make[2]: *** [testnet] Error 1 >> make[2]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' >> make[1]: *** [check-am] Error 2 >> make[1]: Leaving directory >> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test' >> make: *** [check-recursive] Error 1 >> >> lac...@ip... wrote: >> >>> Greetings Jesse, >>> >>> Thanks for that. Is this the system that had problems with 3.2.0b5? >>> If >>> so, it is very good to hear that it runs b6! Is there a reason for >>> not using >>> zlib compression? >>> >>> Could you post the results from make check ? >>> >>> Thanks again, >>> Lachlan >>> >>> >>> >>>> From: "J. op den Brouw" <ht...@op...> >>>> >>>> >>> >>> >>> >>>> HP-UX chaos B.10.20 U 9000/800 2004964319 unlimited-user license >>>> hppa2.0-hp-hpux10.20 >>>> gcc 2.8.1 >>>> make 3.78 >>>> bash 2.03 >>>> >>>> configure works, zlib compression compiled, but not used and no >>>> shared libs >>>> make works >>>> make check fails (!!) >>>> make install works >>>> rundig works (only 1000 pages tested), no external parsers >>>> configured >>>> htsearch works >>>> >>>> builld and rundig log available. >>>> >>>> --jesse >>>> >>>> >> >> >> >> >> ------------------------------------------------------- >> This SF.Net email is sponsored by the new InstallShield X. >>> From Windows to Linux, servers to mobile, InstallShield X is the one >> installation-authoring solution that does it all. Learn more and >> evaluate today! http://www.installshield.com/Dev2Dev/0504 >> _______________________________________________ >> ht://Dig Developer mailing list: >> htd...@li... >> List information (subscribe/unsubscribe, etc.) >> https://lists.sourceforge.net/lists/listinfo/htdig-dev > > > > ------------------------------------------------------- > This SF.Net email is sponsored by the new InstallShield X. > From Windows to Linux, servers to mobile, InstallShield X is the one > installation-authoring solution that does it all. Learn more and > evaluate today! http://www.installshield.com/Dev2Dev/0504 > _______________________________________________ > ht://Dig Developer mailing list: > htd...@li... > List information (subscribe/unsubscribe, etc.) > https://lists.sourceforge.net/lists/listinfo/htdig-dev > |
From: Gabriele B. <g.b...@co...> - 2004-06-03 10:26:31
|
Hi Ted, thank you very much. I tried the configure/make/make install triad and it worked fine. However, 'make check' had some problems, due to a particular apache installation (I have apache 2.0 and tests can't find mod_env.so). Il gio, 2004-06-03 alle 12:07, Ted Stresen-Reuter ha scritto: > After doing the install (with prefix set to /Library/htdig-3.2.0b6) > everything, including man pages and all, ended up in the install > directory. For some reason, these additional goodies weren't getting > installed with b5. I don't know what you've done, but good work on > that! I included them into the automake files (they should be automatically handled); then Lachlan did a great job in customisation of the man pages content. Regarding man pages, I also want to thank Robert for his contribution. Ciao, -Gabriele |
From: <lac...@ip...> - 2004-06-03 09:18:25
|
Greetings Jesse, It's not urgent, but I'd be interested to experiment on this... What is the output from nm htword/.libs/libhtword.a | grep instance ? What happens if, in .../test/, you type g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o \ -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a \ ../htcommon/.libs/libcommon.a ../htword/.libs/libhtword.a \ ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz \ ../htword/.libs/libhtword.a ? What happens if you cp /bin/true test/testnet make check ? Thanks, Lachlan >From: "J. op den Brouw" <ht...@op...> >it's the WordType::instance thing again........... >g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o >-L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm >on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a >../htlib/.libs/libht.a -lz >collect2: ld returned 1 exit status >/usr/ccs/bin/ld: Unsatisfied symbols: > WordType::instance (data) >make[2]: *** [testnet] Error 1 |
From: Gabriele B. <g.b...@co...> - 2004-06-04 06:50:19
|
Hi guys, I haven't been able to look at the tests properly. However, I guess after 3.2.0b6 is out we should really have a deeper look at them. Some of them are really old (Loic made them) and I don't know if they are still useful. Does anyone have a better understanding of the current situation of tests? Ciao, -Gabriele Il gio, 2004-06-03 alle 11:18, lac...@ip... ha scritto: > Greetings Jesse, > > It's not urgent, but I'd be interested to experiment on this... > > What is the output from > nm htword/.libs/libhtword.a | grep instance > ? > > What happens if, in .../test/, you type > g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o \ > -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a \ > ../htcommon/.libs/libcommon.a ../htword/.libs/libhtword.a \ > ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz \ > ../htword/.libs/libhtword.a > ? > > What happens if you > cp /bin/true test/testnet > make check > ? > > Thanks, > Lachlan > > >From: "J. op den Brouw" <ht...@op...> > > >it's the WordType::instance thing again........... > >g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o > >-L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm > >on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a > >../htlib/.libs/libht.a -lz > >collect2: ld returned 1 exit status > >/usr/ccs/bin/ld: Unsatisfied symbols: > > WordType::instance (data) > >make[2]: *** [testnet] Error 1 > > > > ------------------------------------------------------- > This SF.Net email is sponsored by the new InstallShield X. > >From Windows to Linux, servers to mobile, InstallShield X is the one > installation-authoring solution that does it all. Learn more and > evaluate today! http://www.installshield.com/Dev2Dev/0504 > _______________________________________________ > ht://Dig Developer mailing list: > htd...@li... > List information (subscribe/unsubscribe, etc.) > https://lists.sourceforge.net/lists/listinfo/htdig-dev |
From: <lac...@ip...> - 2004-06-04 07:47:41
|
Greetings Gabriele, You're right that some of the tests are a bit old, but a lot of them are new. In doing Neal's testing checklist, I have added a test to exercise each of the config attributes that I have crossed off the list. That slows down a make check quite a bit, but I think having a thorough test suite is worthwhile. I'd be happy to purge the old tests, but most of them are quite quick to run. Cheers, Lachlan >From: Gabriele Bartolini <g.b...@co...> > I haven't been able to look at the tests properly. However, I guess >after 3.2.0b6 is out we should really have a deeper look at them. Some >of them are really old (Loic made them) and I don't know if they are >still useful. > > Does anyone have a better understanding of the current situation of >tests? |
From: Gabriele B. <g.b...@co...> - 2004-06-03 10:30:58
|
Il gio, 2004-06-03 alle 12:07, Ted Stresen-Reuter ha scritto: > I just did ./configure, make, make check, and make install with b6. > make check said there was nothing to be done for anything. Is that > normal? I thought it ran a bunch of tests... Sorry Ted. Did you run configure with 'enable-tests'? -Gabriele |
From: Ted Stresen-R. <ted...@ma...> - 2004-06-03 11:38:21
|
I did now... tedsr% make check Making check in db Making check in htlib make[1]: Nothing to be done for `check'. Making check in htword make[1]: Nothing to be done for `check'. Making check in htcommon Making check in htnet make[1]: Nothing to be done for `check'. Making check in htfuzzy make[1]: Nothing to be done for `check'. Making check in htdb make[1]: Nothing to be done for `check'. Making check in htdig make[1]: Nothing to be done for `check'. Making check in htsearch make[1]: Nothing to be done for `check'. Making check in httools make[1]: Nothing to be done for `check'. Making check in installdir make[1]: Nothing to be done for `check'. Making check in include Making check in htdoc make[1]: Nothing to be done for `check'. Making check in test make MAKE="make" word dbbench txt2mifluz search testnet document url make[2]: `word' is up to date. make[2]: `dbbench' is up to date. make[2]: `txt2mifluz' is up to date. make[2]: `search' is up to date. make[2]: `testnet' is up to date. make[2]: `document' is up to date. make[2]: `url' is up to date. make MAKE="make" check-TESTS PASS: t_wordkey PASS: t_wordlist PASS: t_wordskip PASS: t_wordbitstream PASS: t_search PASS: t_htdb PASS: t_rdonly PASS: t_trunc PASS: t_url running htdig: expected http://localhost:7400/set1/ http://localhost:7400/set1/bad_local.htm http://localhost:7400/set1/script.html http://localhost:7400/set1/site%201.html http://localhost:7400/set1/site2.html http://localhost:7400/set1/site3.html http://localhost:7400/set1/site4.html http://localhost:7400/set1/sub%2520dir/ http://localhost:7400/set1/sub%2520dir/empty%20file.html http://localhost:7400/set1/title.html but got FAIL: t_htdig PASS: t_htsearch PASS: t_htmerge PASS: t_htnet PASS: t_htdig_local awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 10, file source line number 1 awk: empty regular expression input record number 10, file source line number 1 awk: empty regular expression input record number 46, file source line number 1 awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 61, file source line number 1 awk: empty regular expression input record number 46, file source line number 1 awk: empty regular expression input record number 46, file source line number 1 awk: empty regular expression input record number 46, file source line number 1 awk: empty regular expression input record number 46, file source line number 1 awk: empty regular expression input record number 46, file source line number 1 awk: empty regular expression input record number 46, file source line number 1 awk: empty regular expression input record number 10, file source line number 1 awk: empty regular expression input record number 10, file source line number 1 awk: empty regular expression input record number 10, file source line number 1 awk: empty regular expression input record number 10, file source line number 1 awk: empty regular expression input record number 51, file source line number 1 awk: empty regular expression input record number 51, file source line number 1 awk: empty regular expression input record number 51, file source line number 1 awk: empty regular expression input record number 51, file source line number 1 PASS: t_factors tempWords: 'francais:0 ' Boolean: 'francais:0 ' Adding algorithm accents initial: '' Fuzzy on: francais accents searchWords: 'francais:0 ' LogicalWords: francais Pattern: francais Highlight Pattern: francais perform_push @0: francais score: empty list, push 0 @0 term:factor Output doesn't match "1 matches" ../htsearch/htsearch -c /Users/tedsr/Desktop/htdig-3.2.0b6/test/conf/htdig.conf.tmp 'words=francais;search_algorithm=accents:0.1' >> /tmp/t_htsearch24106 -- Search for 'francais' with search_algorithm=accents FAIL: t_fuzzy PASS: t_parsing PASS: t_templates tempWords: 'fran?ais:0 ' Boolean: 'fran?ais:0 ' Adding algorithm exact initial: '' Fuzzy on: fran?ais exact fran?ais searchWords: 'fran?ais:0 ' LogicalWords: fran?ais Pattern: fran?ais Highlight Pattern: fran?ais perform_push @0: fran?ais score: empty list, push 0 @0 term:factor Output doesn't match "1 matches" ../htsearch/htsearch -c /Users/tedsr/Desktop/htdig-3.2.0b6/test/conf/htdig.conf.tmp 'words=fran?ais' >> /tmp/t_htsearch25328 -- Search for 'fran?ais' without translate_latin1 FAIL: t_validwords ==================== 3 of 19 tests failed ==================== make[2]: *** [check-TESTS] Error 1 make[1]: *** [check-am] Error 2 make: *** [check-recursive] Error 1 On Jun 3, 2004, at 11:30 AM, Gabriele Bartolini wrote: > Il gio, 2004-06-03 alle 12:07, Ted Stresen-Reuter ha scritto: >> I just did ./configure, make, make check, and make install with b6. >> make check said there was nothing to be done for anything. Is that >> normal? I thought it ran a bunch of tests... > > Sorry Ted. Did you run configure with 'enable-tests'? > > -Gabriele > |
From: Lachlan A. <lh...@us...> - 2004-06-05 06:24:15
|
Greetings Ted, If you copy the attached files to .../test/ then it should fix the problem with t_htdig, and the spurious warnings for t_factors. The other two seem to suggest that HP-UX doesn't like 8-bit characters. Do you know if that is the case? Cheers, Lachlan On Thu, 3 Jun 2004 09:38 pm, Ted Stresen-Reuter wrote: > I did now... > > tedsr% make check > running htdig: expected > http://localhost:7400/set1/ [delete] > but got > > FAIL: t_htdig > awk: empty regular expression > input record number 61, file > source line number 1 > PASS: t_factors > Output doesn't match "1 matches" > ../htsearch/htsearch -c > /Users/tedsr/Desktop/htdig-3.2.0b6/test/conf/htdig.conf.tmp > 'words=francais;search_algorithm=accents:0.1' >> > /tmp/t_htsearch24106 -- > Search for 'francais' with > search_algorithm=accents > FAIL: t_fuzzy > Output doesn't match "1 matches" > ../htsearch/htsearch -c > /Users/tedsr/Desktop/htdig-3.2.0b6/test/conf/htdig.conf.tmp > 'words=fran?ais' >> /tmp/t_htsearch25328 -- > Search for 'fran?ais' without translate_latin1 > FAIL: t_validwords > ==================== > 3 of 19 tests failed > ==================== -- lh...@us... ht://Dig developer DownUnder (http://www.htdig.org) |