[hpoj-devel] g55 on redhat 7.1

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

hi, i tried installing hpoj on my newly
reinstalled redhat 7.1 printer server,
this time i connected the officejet g55
via the usb port.

rh7.1 has a 2.4.2-2 kernel running. i compiled hpoj
from cvs as of approx. Thu May  3 05:26:39 UTC 2001,
and all seems to compile and install fine.

i started by fisrt stopping lpd
and installing a printer, with the nre printtool in
rh7.1. basically, it sticks this in /etc/printcap:

lp:\
        :sh:\
        :ml=3D0:\
        :mx=3D0:\
        :sd=3D/var/spool/lpd/lp:\
        :lp=3D/dev/ptal-printd/mlc_usb_0:\
        :lpd_bounce=3Dtrue:\
        :if=3D/usr/share/printconf/mf_wrapper:

i am pretty sure it is configured as an hp deskjet 550c,
but i don't know where those settings are put.

i note that i start with these modules:

Module                  Size  Used by
nls_iso8859-1           2880   1  (autoclean)
nfs                    79008   2  (autoclean)
nfsd                   69696   8  (autoclean)
lockd                  52464   1  (autoclean) [nfs nfsd]
sunrpc                 61328   1  (autoclean) [nfs nfsd lockd]
via82cxxx_audio        17552   1  (autoclean)
ac97_codec              8800   0  (autoclean) [via82cxxx_audio]
ide-cd                 26848   1  (autoclean)
cdrom                  27232   0  (autoclean) [ide-cd]
soundcore               4464   2  (autoclean) [via82cxxx_audio]
tdfx                   58640   1=20
agpgart                23392   1=20
printer                 4928   0=20
autofs                 11264   1  (autoclean)
tulip                  38544   1  (autoclean)
usb-uhci               20720   0  (unused)
usbcore                49664   1  [printer usb-uhci]

(actually, these three started when i used printtool, then
i rmmod'd them:

Module                  Size  Used by
parport_pc             17968   1  (autoclean)
lp                      5168   0  (autoclean)
parport                25952   1  (autoclean) [parport_pc lp]

)

the messages file had said (while booting) the following
abou usb:

May  3 04:58:40 tcb /etc/hotplug/usb.agent: ... no drivers for USB product =
0/0/0
May  3 04:58:40 tcb /etc/hotplug/usb.agent: ... no drivers for USB product =
0/0/0
May  3 04:58:40 tcb kernel: usb.c: registered new driver usblp
May  3 04:58:40 tcb kernel: printer.c: usblp0: USB Bidirectional printer de=
v 2 if 0 alt 0

i then ran:

	ptal-printd mlc:usb:0 -like /dev/lp0
	ptal-mlcd usb:0 -device /dev/lp0

nothing new showed up in the /var/log/messages after that.
then i tried this:

hpoj# ptal-devid mlc:usb:0

ptal-mlcd: ERROR at ExMgr.cpp:2528, dev=3D<usb:0>, pid=3D4132, errno=3D22
llioGetDeviceID: ioctl failed!

ptal-mlcd: ERROR at ExMgr.cpp:1986, dev=3D<usb:0>, pid=3D4132, errno=3D22
llioOpen: llioGetDeviceID failed!
ptalMlcDeviceGetDeviceIDString(dev=3Dusb:0): unsuccessful status=3D13!
ptalDeviceGetDeviceIDString(dev=3Dmlc:usb:0) failed!
hpoj#

at this point, i notice the parport modules loaded up again.
i remove them, i also comment something in /etc/modules.conf

hpoj# grep parport /etc/modules.conf
#alias parport_lowlevel parport_pc
hpoj#

and do a depmod -a.

then, since the PRINT-HOWTO is ambiguous, i did a
kill -HUP ptal-mlcd and then try this:

	ptal-mlcd usb:0 -device /dev/usb/lp0

with this, i try again:

hpoj# ptal-devid mlc:usb:0

ptal-mlcd: ERROR at transport/ExMlcCommandChannel.cpp:184, dev=3D<usb:0>, p=
id=3D4179, errno=3D11
Reply timer popped on port=3D0, count=3D1!

ptal-mlcd: ERROR at ExMgr.cpp:859, dev=3D<usb:0>, pid=3D4179, errno=3D11
exClose(reason=3D0x3002)
ptalMlcDeviceGetDeviceIDString(dev=3Dusb:0): unsuccessful status=3D13!
ptalDeviceGetDeviceIDString(dev=3Dmlc:usb:0) failed!
hpoj#=20

note that it takes about 5 to 10 seconds for the message to  show up.

also, i tried starting the printer daemon like this:

/etc/init.d/lpd start

but still the same issue. however, i notice that after a couple
of minutes start getting this _repeatedly_ on the terminal i
lanched the two daemons, surely the output is form one of them...

ptal-mlcd: ERROR at transport/ExMlcCommandChannel.cpp:184, dev=3D<usb:0>, p=
id=3D4179, errno=3D11
Reply timer popped on port=3D0, count=3D1!

ptal-mlcd: ERROR at ExMgr.cpp:859, dev=3D<usb:0>, pid=3D4179, errno=3D11
exClose(reason=3D0x3002)
ptalChannelOpen(chan=3D0x0804AFD8): provider failed open!
ptal-printd(mlc:usb:0): ptalChannelOpen failed!  Will delay and retry.

i also tried "waking up" the printer, since it was in power conservation
mode, and it made no difference that i can observe.

ideas?

i will try when i have more energy with the parallel port
and see what happens. i assume that the usb interface is
much faster, correct?

that is why i am going through this whole usb exercise :)

let me send you the script i went through, based on a previous
email in the list. i followed the directions there. now,
after installing ptal-printd, i got this
after trying to print:

ptal-printd(mlc:usb:0): ptalChannelOpen failed!  Will delay and retry.
ptalMlcConnect(dev=3Dusb:0): error connecting socket, errno=3D111!
ptalChannelOpen(chan=3D0x0804AFD8): provider failed open!
ptal-printd(mlc:usb:0): ptalChannelOpen failed!  Will delay and retry.
ptalMlcConnect(dev=3Dusb:0): error connecting socket, errno=3D111!
ptalChannelOpen(chan=3D0x0804AFD8): provider failed open!
ptal-printd(mlc:usb:0): ptalChannelOpen failed!  Will delay and retry.
ptalMlcConnect(dev=3Dusb:0): error connecting socket, errno=3D111!
ptalChannelOpen(chan=3D0x0804AFD8): provider failed open!
ptal-printd(mlc:usb:0): ptalChannelOpen failed!  Will delay and retry.

here is the log.

cpg@tcb: hpoj[02:36:04](4)tcb:hpoj# killall ptal-mlcd ptal-printd
ptal-mlcd: no process killed
ptal-printd: no process killed
cpg@tcb: hpoj[02:36:11](4)tcb:hpoj# ptal-mlcd usb:0 -nofork -device /dev/us=
b/lp0

ptal-mlcd debug console initialized.
Type 'help' for a list of valid commands.

ptal-mlcd usb:0 -> log

ptal-mlcd usb:0 -> activate

ptal-mlcd: INFO at ExMgr.cpp:1991, dev=3D<usb:0>, pid=3D4299, errno=3D0
llioOpen: deviceID=3D<MFG:Hewlett-Packard;MDL:OfficeJet G55;CMD:MLC,PCL,PML=
,SCL;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard OfficeJet G Series;1284.3M:f=
7f,f7f;1284.4DL:4d,4e,1;SERN:SGD05106RCVL;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K=
0,C0,SM,NR,KP039,CP098;AiO:0;>.

ptal-mlcd: ENTRY at transport/ExTransport.cpp:1002, dev=3D<usb:0>, pid=3D42=
99, errno=3D0
activate(port=3D0,reverseDataBufferCount=3D180,reverseDataBufferSize=3D4102=
,maxForwardBdrsPerTransaction=3D4)

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080620A8 ().

ptal-mlcd: ENTRY at transport/ExTransport.cpp:373, dev=3D<usb:0>, pid=3D429=
9, errno=3D0
allocate(port=3D0,channel=3D0,pService=3D0x00000000,scd=3D0x00000000,forwar=
dDataPriority=3D0,minBuffersRequired=3D0,benefitOfMoreBuffers=3D0,reverseDa=
taBufferSize=3D4102): tcd=3D0x00000579.

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080623B0 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062418 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080624D0 ().

ptal-mlcd: INFO at transport/ExMlcCommandChannel.cpp:722, dev=3D<usb:0>, pi=
d=3D4299, errno=3D0
sendInit(port=3D0): revision=3D0x20.

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080624D0 ().

ptal-mlcd: INFO at ExMgr.cpp:306, dev=3D<usb:0>, pid=3D4299, errno=3D0
Starting ExWatchdogTimer=3D0x080624D0 (), delay=3D{sec=3D15,usec=3D0}.

ptal-mlcd: INFO at ExMgr.cpp:306, dev=3D<usb:0>, pid=3D4299, errno=3D0
Starting ExWatchdogTimer=3D0x080620A8 (), delay=3D{sec=3D15,usec=3D0}.

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062418 ().

ptal-mlcd: INFO at transport/ExMlcTransport.cpp:813, dev=3D<usb:0>, pid=3D4=
299, errno=3D0
addOverhead(port=3D0,channel=3D0): psid=3D0x00, ssid=3D0x00, length=3D8, cr=
edit=3D1, control=3D0x00.

ptal-mlcd: ENTRY at transport/ExTransport.cpp:602, dev=3D<usb:0>, pid=3D429=
9, errno=3D0
sendForwardData(port=3D0,channel=3D0,pBdr=3D0x080646F8,priority=3D0)

ptal-mlcd: INFO at transport/ExTransport.cpp:614, dev=3D<usb:0>, pid=3D4299=
, errno=3D0
forwardDataAvailable(port=3D0,channel=3D0): loopCount=3D1, no more data.
exActivate returns 1.

ptal-mlcd usb:0 ->=20
ptal-mlcd: INFO at ExMgr.cpp:2162, dev=3D<usb:0>, pid=3D4299, errno=3D0
llioService: sent 6 bytes.
00 00 00 08 01 00     (......)

ptal-mlcd: INFO at ExMgr.cpp:2162, dev=3D<usb:0>, pid=3D4299, errno=3D0
llioService: sent 2 bytes.
00 20     (. )

ptal-mlcd: ENTRY at transport/ExTransport.cpp:640, dev=3D<usb:0>, pid=3D429=
9, errno=3D0
forwardDataResponse(port=3D0,channel=3D0,pBdr=3D0x080646F8,status=3D0)

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080620A8 ().

ptal-mlcd: EXIT at ExMgr.cpp:2176, dev=3D<usb:0>, pid=3D4299, errno=3D0
llioService: readCount=3D0, writeCount=3D1.

ptal-mlcd: INFO at ExMgr.cpp:306, dev=3D<usb:0>, pid=3D4299, errno=3D0
Starting ExWatchdogTimer=3D0x08064530 (), delay=3D{sec=3D0,usec=3D100000}.

ptal-mlcd usb:0 -> dump

ExMgr:
gDebugFlag=3D1
pBufferPool: available#=3D1, size=3D4102, requested#=3D230, allocated#=3D1
initialized=3D1
nofork=3D1
activateAtStartup=3D0
argc=3D0
fd=3D0: r=3D1, w=3D0, x=3D0
fd=3D3: r=3D1, w=3D0, x=3D0
fdCount=3D4
exState=3D1
exActivateCount=3D1
exCloseCount=3D0
exCloseReason=3D0x0000
exReactivateFlag=3D0
noDot4=3D0
tryDot4=3D1
tryMlc=3D1
miser=3D0
pFreeMsgPool: depth=3D0
pPendingMsgQueue: depth=3D0
pActiveTimerQueue: depth=3D1
pPeriodicTimerQueue: depth=3D1
select timeout: sec=3D0, usec=3D100000, infinite=3D0
consoleAllowRemote=3D0
consoleOldStdin=3D4
consoleOldStdout=3D5
consoleIsRemote=3D0
socketSuffix=3D<usb:0>
socketAliasSuffix=3D<>
socketName=3D</dev/ptal-mlcd/usb:0>
socketAliasName=3D<>
socketFd=3D3
pmlTransportSession=3D8
sessionInWrite=3D0
llioName=3D</dev/usb/lp0>
llioOverrideDeviceID=3D<>
llioFd=3D6
llioDummyFd=3D-1
llioPollState=3D1
llioLastHitTime=3D988961838
llioForwardBdrQueue: depth=3D0
llioDeviceID=3D<MFG:Hewlett-Packard;MDL:OfficeJet G55;CMD:MLC,PCL,PML,SCL;C=
LASS:PRINTER;DESCRIPTION:Hewlett-Packard OfficeJet G Series;1284.3M:f7f,f7f=
;1284.4DL:4d,4e,1;SERN:SGD05106RCVL;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K0,C0,S=
M,NR,KP039,CP098;AiO:0;>

Transport:
this=3D0x08061FE0
port=3D0
pMgr=3D0x08061480
pPhysicalPort=3D0x08061480
forwardTransactionCounter: current=3D16, initial=3D16, low=3D15, high=3D16,=
 max=3D16
channelCount=3D17
channelArray=3D0x080621D0
channelArray[0]=3D0x08062218
channelArray[1]=3D0x08062510
channelArray[2]=3D0x08062710
channelArray[3]=3D0x08062910
channelArray[4]=3D0x08062B10
channelArray[5]=3D0x08062D10
channelArray[6]=3D0x08062F10
channelArray[7]=3D0x08063110
channelArray[8]=3D0x08063310
channelArray[9]=3D0x08063510
channelArray[10]=3D0x08063710
channelArray[11]=3D0x08063910
channelArray[12]=3D0x08063B10
channelArray[13]=3D0x08063D10
channelArray[14]=3D0x08063F10
channelArray[15]=3D0x08064110
channelArray[16]=3D0x08064310
overheadBufferCount=3D0
pNextTransport=3D0x00000000
pForwardDataTimer=3D0x080620A8 (count=3D0)
pForwardDataTimeoutMsg=3D0x08062078
reverseDataBufferCount=3D180
reverseDataBufferSize=3D4102
maxForwardBdrsPerTransaction=3D4
nextChannelToAllocate=3D1
nextBlockedChannel=3D-1
lookupQueue: depth=3D0, peek=3D0x00000000
----------------
pForwardHeaderPool=3D0x080620E8
mlcChannelArray=3D0x080621D0
pCommandChannel=3D0x08062218
grcState=3D0
reverseDataStopped=3D0
tryDot4=3D1
tryPreDot4=3D0
tryMlc=3D1
requestedRevision=3D0x20
revision=3D0xFFFF
maxRemoteSockets=3D32

Command channel:
this=3D0x08062218
port=3D0
channel=3D0
localSocket=3D0
pTransport=3D0x08061FE0
pMgr=3D0x08061480
pPhysicalPort=3D0x08061480
openingAnySetFlags=3D0x0010
closingAnySetFlags=3D0x0124
flags=3D0x0003
countOpen=3D0
countOpenFailure=3D0
pService=3D0x00000000
scd=3D0x00000000
forwardDataPriority=3D0
minBuffersRequired=3D0
benefitOfMoreBuffers=3D0
reverseDataBufferSize=3D4102
bufferCount=3D3
remoteSocket=3D0
maxForwardDatalen=3D58
maxReverseDatalen=3D58
countForwardData=3D1
countReverseData=3D0
countReverseBuffers=3D0
countReverseBufferReturns=3D0
lastReverseBuffer=3D0x00000000
currentForwardBuffer=3D0x00000000
currentGrabbedCredit=3D-1
currentGrabbedTransaction=3D-1
----------------
pMlcTransport=3D0x08061FE0
pCommandChannel=3D0x08062218
disableCreditCommands=3D1
pForwardCreditRequestTimer=3D0x080623B0
pForwardCreditRequestMsg=3D0x08062380
pReverseCreditHeartbeatTimer=3D0x08062418
pReverseCreditHeartbeatMsg=3D0x080623E8
musherFirstCreditRequestDelay=3D2
musherNextCreditRequestDelay=3D5
gusherFirstCreditRequestDelay=3D5
gusherNextCreditRequestDelay=3D10
miserFirstCreditRequestDelay=3D0
miserNextCreditRequestDelay=3D2
gusherPiggybackCreditCount=3D1
gusherCreditCount=3D2
miserCreditRequestCount=3D2
workaroundReverseCreditLoss=3D0
maxForwardPacketSize=3D64
maxReversePacketSize=3D64
forwardCreditRequest=3D16
forwardMaxOutstandingCredit=3D1
forwardCredit: current=3D0, initial=3D0, low=3D0, high=3D0, max=3D65535
lastCreditRequestGotUsNowhere=3D0
reverseMaxOutstandingCredit=3D1
reverseBuffersPerPacket=3D1
uncreditedBuffers=3D0
reverseCreditToGrant=3D2
reverseCredit: current=3D1, initial=3D1, low=3D1, high=3D1, max=3D65535
countSendPiggybackCredit=3D1
countHandlePiggybackCredit=3D0
countSendCredit=3D0
countHandleCredit=3D0
countHandleCreditAfterCreditRequest=3D0
countSendCreditRequest=3D0
countHandleCreditRequest=3D0
countSendEmptyCreditRequestReply=3D0
countHandleEmptyCreditRequestReply=3D0
isGusher=3D-1
----------------
pForwardCommandPool=3D0x08062450
pForwardNonconsumingQueue=3D0x08062470
pForwardReplyQueue=3D0x08062480
pForwardRequestQueue=3D0x08062490
forwardRequestCredit: current=3D0, initial=3D0, low=3D0, high=3D0, max=3D65=
535
pCommandReplyTimer=3D0x080624D0 (count=3D1)
pCommandReplyTimeoutMsg=3D0x080624A0
allowErrorPackets=3D1
lastPsid=3D-1
lastSsid=3D-1

ptal-mlcd usb:0 ->=20
ptal-mlcd: INFO at ExMgr.cpp:306, dev=3D<usb:0>, pid=3D4299, errno=3D0
Starting ExWatchdogTimer=3D0x08064530 (), delay=3D{sec=3D0,usec=3D100000}.

ptal-mlcd: INFO at ExMgr.cpp:900, dev=3D<usb:0>, pid=3D4299, errno=3D0
msgService: pMsg=3D0x080624A0, pMsgHandler=3D0x08062218, type=3D2.

ptal-mlcd: ERROR at transport/ExMlcCommandChannel.cpp:184, dev=3D<usb:0>, p=
id=3D4299, errno=3D0
Reply timer popped on port=3D0, count=3D1!

ptal-mlcd: ERROR at ExMgr.cpp:859, dev=3D<usb:0>, pid=3D4299, errno=3D0
exClose(reason=3D0x3002)

ptal-mlcd: ENTRY at transport/ExTransport.cpp:1193, dev=3D<usb:0>, pid=3D42=
99, errno=3D0
deactivate(port=3D0,reason=3D12290)

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080620A8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080623B0 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062418 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080624D0 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062670 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080626D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062870 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080628D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062A70 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062AD8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062C70 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062CD8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062E70 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08062ED8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063070 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080630D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063270 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080632D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063470 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080634D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063670 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080636D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063870 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080638D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063A70 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063AD8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063C70 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063CD8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063E70 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08063ED8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08064070 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080640D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08064270 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080642D8 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x08064470 ().

ptal-mlcd: INFO at ExMgr.cpp:323, dev=3D<usb:0>, pid=3D4299, errno=3D0
Cancelling ExWatchdogTimer=3D0x080644D8 ().

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D0,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D1,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D2,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D3,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D4,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D5,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D6,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D7,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D8,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D24,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D25,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D26,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D27,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D28,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D29,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D30,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D31,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D9,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D10,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D11,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D12,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D13,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D14,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D15,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D16,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D17,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D18,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D19,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D20,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D21,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D22,state=3D0,param=3D-1): oldState=3D0.

ptal-mlcd: ENTRY at ExMgr.cpp:1230, dev=3D<usb:0>, pid=3D4299, errno=3D0
sessionChangeState(scd=3D23,state=3D0,param=3D-1): oldState=3D0.