[hpoj-devel] problem with hp officejet g85

[<Bar...@t-...>]

hi, 

i run hp officejet g85 under suse 7.0 (2.2.16 kernel)

scanimage scanimage -d hp:mlc:mlcpp0 --test

fails with following log messages:

  scanimage -d hp:mlc:mlcpp0 --test
[sanei_debug] Setting debug level of hp to 12.
[hp] sane_init called
ptalInit(): debug level set to 2.
ptalInit()
ptalDeviceProbe: dev=<mlc:mlcpp0>.
ptalDeviceAdd(provider=<mlc>,name=<mlcpp0>): dev=0x080508F0.
ptalDeviceProbe: dev=<mlc:mlcpp1>.
ptalDeviceAdd(provider=<mlc>,name=<mlcpp1>): dev=0x08050918.
[hp] sane_init will finish with Success
[hp] sane_open called
[hp] hp_read_config: hp backend v0.93 starts reading config file
[hp] hp_read_config: processing line <#scsi HP>
[hp] hp_read_config: processing line <#/dev/scanner>
[hp] hp_read_config: processing line <mlc:mlcpp0>
[hp] hp_read_config: processing line <option connect-ptal>
[hp] hp_read_config: processing line <>
[hp] hp_read_config: attach mlc:mlcpp0
[hp] hp_get_dev: New device mlc:mlcpp0, connect-ptal, scsi-request=0
[hp] sanei_hp_device_new: mlc:mlcpp0
ptalMlcDeviceOpen(name=<mlcpp0>): found matching dev=0x080508F0.
ptalChannelAllocate(dev=0x080508F0): chan=0x080549E8.
ptalChannelSetRemoteService(chan=0x080549E8,serviceType=2,socketID=0,serviceName=<>)
ptalMlcChannelOpen(chan=0x080549E8): error creating socket!
ptalChannelOpen(chan=0x080549E8): provider failed open!
[hp] hp_nonscsi_device_new: SCL reset failed
[hp] scsi_close: closing fd -1
ptalChannelClose(chan=0x080549E8)
ptalChannelClose(chan=0x080549E8): not open!
[hp] hp_get_dev: New device mlc:mlcpp0, connect-ptal, scsi-request=0
[hp] sanei_hp_device_new: mlc:mlcpp0
ptalMlcDeviceOpen(name=<mlcpp0>): found matching dev=0x080508F0.
ptalMlcChannelOpen(chan=0x080549E8): error creating socket!
ptalChannelOpen(chan=0x080549E8): provider failed open!
[hp] hp_nonscsi_device_new: SCL reset failed
[hp] scsi_close: closing fd -1
ptalChannelClose(chan=0x080549E8)
ptalChannelClose(chan=0x080549E8): not open!
scanimage: open of device hp:mlc:mlcpp0 failed: Error during device I/O
[hp] sane_exit called
[hp] sane_exit will finish

do i have something installed wrong, or are some access rights to be set?

any suggestions?

thanks in advance

manfred