Re: [hpoj-devel] Printing was too dark

[<mab...@ya...>]

--- Joe Piolunek <joe...@sn...> escribió: >
On Fri, 13 Oct 2000, Marco Becerril wrote:
> > Hi again:
> > 
> > I created and saved the file gamma.ps as you
> indicated
> > in the e-mail. Also, I entered the extra gs
> option...
> > you wrote.
> > 
> > When I sent the file to print, and started to
> print, I
> > saw the HP 1150C panel and it said more or less.
> > "Normal printing". (I said: YES!)
> 
> I don't have any knowledge of the 1150C. I don't
> normally need to look at the
> panel on my 600. What was the print command you were
> using, and where were you
> trying to print from?

The command I used was pr, and  I used it from my
Gnome-Mozilla Netscape Navigator 4.72.

> 
> 
> > 
> > However, the printer continued and it printed the
> > following message in stair-stepping text:
> > 
> > Error: /undefinedfilename in (gs)
> >                                  Operand stack:
> >                                               
> > Execution stack:
> >                 %interp_exit
> > 
> 
> It sounds like ghostscript had a problem with either
> the command you entered or
> possibly something about gamma.ps. Could you post
> the exact contents of your
> gamma.ps?

%! 
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp}
currenttransfer
setcolortransfer 

> 
> > After this, the printer printed the file I sent,
> but
> > it also was too dark. I saw the HP 1150C panel and
> it
> > had the "Quality" option.
> > 
> > Any idea about it?
> > 
> > Marco Becerril
> > 
> 
> First, start printtool see if any settings should be
> corrected. It may be that
> printtool changed one or more of your driver
> settings when you added the extra
> gs option.
> 
> If you still have trouble, can you post the relevant
> section of
> your /etc/printcap file

# /etc/printcap
#
# Please don't edit this file directly unless you know
what you are doing!
# Be warned that the control-panel printtool requires
a very strict format!
# Look at the printcap(5) man page for more info.
#
# This file can be edited with the printtool in the
control-panel.

##PRINTTOOL3## LOCAL cdj550 300x300 letter {}
DeskJet550 32 1
HPOJ-1150C:\
	:sd=/var/spool/lpd/HPOJ-1150C:\
	:mx#0:\
	:lp=/dev/lp0:\
	:if=/var/spool/lpd/HPOJ-1150C/filter:\
	:sh:

 and the contents of the
> postscript.cfg file that is in
> the spool directory for the driver you're using? You
> can use a text editor to
> open postcript.cfg.

#
# configuration related to postscript printing
# generated automatically by PRINTTOOL
# manual changes to this file may be lost
#
GSDEVICE=cdj550
RESOLUTION=300x300
COLOR=-dBitsPerPixel=32
PAPERSIZE=letter
EXTRA_GS_OPTIONS="gs /usr/local/etc/gamma.ps"
REVERSE_ORDER=
PS_SEND_EOF=NO

#
# following is related to printing multiple pages per
output page
#
NUP=1
RTLFTMAR=18
TOPBOTMAR=18


I hope the above information helps in this regard.

Again, thanks in advanced.

Marco Becerril


_________________________________________________________
Do You Yahoo!?
Obtenga su dirección de correo-e gratis @yahoo.com
en http://correo.espanol.yahoo.com