From: Laurence <Lau...@te...> - 2005-10-03 23:45:48
|
On Mon, 2005-10-03 at 22:19 +0200, Guido Milanese wrote: > I have recently bought this all-in-one printer + scanner etc. and I am trying > to use it under Linux (Mandriva LE 2005). I follwed the instruction I found > at > > http://www.linuxprinting.org/show_printer.cgi?recnum=HP-OfficeJet_5110 > > and I am using HPIJS 2.1.1. Printing is basically OK, but scanning is still a > dream (under Windows it's all right, so no hardware problem). > > The abovementioned page says: > > Scanning works using the HPOJ low-level driver together with its SANE > backend "hpoj". > > The problem is that scanimage -L returns "No scanners were identified." ( even > if I run the command as root), so I think that the scanner is simply not > seen. Also trying with GUI tools, as Mandrake drakscanner, does not find the > scanner. > > Other info: > (1) at /etcsane.d ther is not a configuration file for my scanner. Witing a > conf file is mandatory or does SANE read a default file? > (2) the dll.conf file has these lines: > # HP OfficeJet backend homepage: http://hpoj.sf.net/ > # Uncomment the following line if hpoj is installed: > hpoj > niash > hp_rts88xx > hpaio > > I have also these files: > /usr/lib/sane/libsane-hpoj.so > /usr/lib/sane/libsane-hpoj.so.1 > /usr/lib/sane/libsane-hpoj.so.1.0 > /usr/lib/libhpojip.so.0 > /usr/lib/libhpojip.so.0.1 > /usr/lib/libsane-hpoj.so > /usr/lib/libsane-hpoj.so.1 > /usr/lib/libsane-hpoj.so.1.0 > > Is it all right? > > Maybe it's a mistake to use both HPOJ and HPIJS: the hpoj page at sourceforge > says: "HPOJ and HPLIP can co-exist on the same PC, but they cannot access the > same device". > > Can I ask for your help? I tried also in other lists, but had very limited > success... > > Best regards from Italy, > guido > > Hi guido I run a HP6110 which is basically the same device. I use hplip which is the new system developed by HP for these printers under linux. You should be able to find the programs on the HP web site. |