[hpoj-devel] officejet pro 1150c not working anymore

[Mr M. <mac...@gm...>]

hi

after updating my kernel, i've been trying to print some stuff, but to 
no avail. sometimes, when i try to print a test page, it will print 
about a quarter of it before just stopping and doing nothing more ... 
i've tried adding and readding the printer and going through ptal-init 
and stuff. i'm using fedora core 4 with the kernel 2.6.13.rc6 and 
realtime-preempt patches (it has worked on a similar setup).

here is some messages i got:

Aug 17 07:27:30 localhost ptal-mlcd: ERROR at 
transport/ExMlcCommandChannel.cpp:253, dev=<mlc:par:OFFICEJET@/dev/lp0>, 
pid=1772, e=11, t=1124227650         Command reply timeout on port=0, 
count=1, lastRequest=0x00!
Aug 17 07:27:30 localhost ptal-mlcd: ERROR at ExMgr.cpp:871, 
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=5, t=1124227650 
exClose(reason=0x3002)
Aug 17 07:27:36 localhost ptal-mlcd: ERROR at 
transport/ExMlcCommandChannel.cpp:253, dev=<mlc:par:OFFICEJET@/dev/lp0>, 
pid=1772, e=5, t=1124227656         Command reply timeout on port=0, 
count=1, lastRequest=0x00!
Aug 17 07:27:36 localhost ptal-mlcd: ERROR at ExMgr.cpp:871, 
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=5, t=1124227656 
exClose(reason=0x3002)
Aug 17 07:27:48 localhost ptal-mlcd: SYSLOG at 
/usr/src/build/533581-i386/BUILD/hpoj-0.91/mlcd/ExMgr.h:646, 
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=11, t=1124227668 
ptal-mlcd successfully activated, mode=MLC.
Aug 17 07:27:48 localhost ptal-mlcd: ERROR at 
transport/ExMlcCommandChannel.cpp:1782, 
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=11, t=1124227668 
handleError(port=0,MLC): error=0x06.
Aug 17 07:27:48 localhost ptal-mlcd: ERROR at ExMgr.cpp:871, 
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=5, t=1124227668 
exClose(reason=0x3006)


any help greatly appreciated (please CC me on any replies).

shayne