[hpoj-devel] Re: Can't print with PSC 2410

[dsuffiel <dav...@hp...>]

I would try HPLIP instead of HPOJ. See hpinkjet.sf.net.

On Wed, 30 Mar 2005 23:34:32 +0200, Xavier Poinsard wrote:

> The printer is correctly seen by ptal-XXX.
> If I try to print nothing happens, but if remove the usblp kernel module 
> printing starts but hangs almost immediately.
> 
> ptal-init-setup :
> 
>   Found "psc 2400 series"
>      with serial number "MY47MM22XH6T".
>      This device is already set up as "mlc:usb:psc_2400_series".
> 
> 
> in syslog :
> ptal-mlcd: SYSLOG at ExMgr.cpp:652, dev=<mlc:usb:psc_2400_series>, 
> pid=30441, e=2, t=1112217458         ptal-mlcd successfully initialized.
> ptal-printd: ptal-printd(mlc:usb:psc_2400_series) successfully 
> initialized using /var/run/ptal-printd/mlc_usb_psc_2400_series*.
> ptal-photod: ptal-photod(mlc:usb:psc_2400_series) successfully 
> initialized, listening on port 5703.
> 
> If I try to print :
> ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:psc_2400_series>, 
> pid=7423, e=16, t=1112160630         Couldn't find device!
> 
> If I remove usblp :
> ptal-mlcd: SYSLOG at 
> /var/lib/mythtv/mnt/home/msp/src/debian/hpoj/hpoj-0.91/mlcd/ExMgr.h:646, 
> dev=<mlc:usb:psc_2400_series@%001%002>, pid=7423, e=11, t=1112214650 
>       ptal-mlcd successfully activated, mode=1284.4.
> ptal-mlcd: ERROR at ExMgr.cpp:3165, 
> dev=<mlc:usb:psc_2400_series@%001%002>, pid=27300, e=11, t=1112214655 
>        llioSubprocess: llioWrite returns -110, expected=63!
> 
> 
> Additional info :
> ptal-connect mlc:usb:psc_2400_series -service PTAL-MLCD-DUMP
> ptal-connect: connecting to device "mlc:usb:psc_2400_series"...  successful.
> 
> ExMgr:
> pid=30441
> gDebugFlag=0
> pBufferPool: available#=0, size=4102, requested#=390, allocated#=1
> noFork=0
> noDrain=0
> forceMlcDot4=0
> noDot4=0
> noMlc=0
> noPmlMultiplexing=0
> initialized=1
> fd=5: read=1, write=0
> fd=8: read=1, write=0
> fdCount=9
> exContext=2
> exState=0
> exActivateCount=0
> exCloseCount=0
> exCloseReason=0x0000
> tryDot4=0
> tryMlc=0
> transportMode=0=print-only
> miser=0
> argcOriginal=8
> argvOriginal:  "mlc:usb:psc_2400_series" "-devidmatch" "MDL:psc 2400 
> series;" "-devidmatch" "SN:MY47MM22XH6T;" "-device" "/dev/usb/lp[0-9]*" 
> "/dev/usblp[0-9]*"
> argc=0
> fdNull=4
> pFreeMsgPool: depth=0
> pPendingMsgQueue: depth=0
> pActiveTimerQueue: depth=0
> pPeriodicTimerQueue: depth=0
> select timeout: sec=0, usec=0, infinite=1
> consoleAllowRemote=0
> consoleOldStdin=6
> consoleOldStdout=7
> consoleIsRemote=0
> socketSuffix=<usb:psc_2400_series>
> socketName=</var/run/ptal-mlcd/usb:psc_2400_series>
> socketFd=5
> pmlTransportSession=8
> pmlCurrentSession=-1
> pmlLastSession=31
> llioPossibleName[0]=</dev/usb/lp[0-9]*>
> llioPossibleName[1]=</dev/usblp[0-9]*>
> llioPossibleNameCount=2
> llioName=<>
> llioGlobBuffer.gl_pathc=0
> llioGlobBuffer.gl_offs=0
> llioGlobFlags=0
> llioMatchDeviceID[0]=<MDL:psc 2400 series;>
> llioMatchDeviceID[1]=<SN:MY47MM22XH6T;>
> llioMatchDeviceIDCount=2
> llioInterface[EX_INTERFACE_MLC].pForwardBdrQueue: depth=0
> llioInterface[EX_INTERFACE_MLC].active=0
> llioInterface[EX_INTERFACE_MLC].transportState=0
> llioInterface[EX_INTERFACE_MLC].fdPipe.read=-1
> llioInterface[EX_INTERFACE_MLC].fdPipe.write=-1
> llioInterface[EX_INTERFACE_MLC].fdDevice=-1
> llioInterface[EX_INTERFACE_MLC].overrideMaxForwardPacketSize=0
> llioInterface[EX_INTERFACE_MLC].pid=-1
> llioInterface[EX_INTERFACE_PRINT].pForwardBdrQueue: depth=0
> llioInterface[EX_INTERFACE_PRINT].active=0
> llioInterface[EX_INTERFACE_PRINT].transportState=0
> llioInterface[EX_INTERFACE_PRINT].fdPipe.read=-1
> llioInterface[EX_INTERFACE_PRINT].fdPipe.write=-1
> llioInterface[EX_INTERFACE_PRINT].fdDevice=-1
> llioInterface[EX_INTERFACE_PRINT].overrideMaxForwardPacketSize=0
> llioInterface[EX_INTERFACE_PRINT].pid=-1
> llioEnablePrintInterface=1
> llioDeviceID=<>
> llioSavedDeviceID=<>
> llioMatchVendorID=0xFFFFFFFF
> llioMatchProductID=0xFFFFFFFF
> llioAllowComposite=1
> llioGlobUsb=1
> llioAllowChannelChangeRequest=1
> llioBusAddress=0
> llioDeviceAddress=0
> llioVendorID=0x0000
> llioProductID=0x0000
> llioSupportedProtocols=0x00
> llioCurrentProtocol=0
> llioDesiredProtocol=0
> 
> Passthrough transport:
> this=0x00000000080762F0
> port=0
> pMgr=0x0000000008073008
> pPhysicalPort=0x0000000008073008
> forwardTransactionCounter: current=128, initial=128, low=128, high=128, 
> max=128
> channelCount=1
> channelArray=0x00000000080763D0
> channelArray[0]=0x00000000080763E0
> overheadBufferCount=0
> pNextTransport=0x0000000000000000
> pForwardDataTimer=0x0000000008076390 (count=0)
> pForwardDataTimeoutMsg=0x0000000008076360
> reverseDataBufferCount=0
> reverseDataBufferSize=0
> maxForwardBdrsPerTransaction=0
> nextChannelToAllocate=0
> absoluteMaxForwardDatalen=0
> absoluteMaxReverseDatalen=0
> nextBlockedChannel=-1
> lookupQueue: depth=0, peek=0x0000000000000000
> 
> MLC/1284.4 transport:
> this=0x0000000008073DB0
> port=0
> pMgr=0x0000000008073008
> pPhysicalPort=0x0000000008073008
> forwardTransactionCounter: current=128, initial=128, low=128, high=128, 
> max=128
> channelCount=17
> channelArray=0x0000000008073FA8
> channelArray[0]=0x0000000008073FF0
> channelArray[1]=0x00000000080742F0
> channelArray[2]=0x00000000080744F0
> channelArray[3]=0x00000000080746F0
> channelArray[4]=0x00000000080748F0
> channelArray[5]=0x0000000008074AF0
> channelArray[6]=0x0000000008074CF0
> channelArray[7]=0x0000000008074EF0
> channelArray[8]=0x00000000080750F0
> channelArray[9]=0x00000000080752F0
> channelArray[10]=0x00000000080754F0
> channelArray[11]=0x00000000080756F0
> channelArray[12]=0x00000000080758F0
> channelArray[13]=0x0000000008075AF0
> channelArray[14]=0x0000000008075CF0
> channelArray[15]=0x0000000008075EF0
> channelArray[16]=0x00000000080760F0
> overheadBufferCount=0
> pNextTransport=0x00000000080762F0
> pForwardDataTimer=0x0000000008073E80 (count=0)
> pForwardDataTimeoutMsg=0x0000000008073E50
> reverseDataBufferCount=0
> reverseDataBufferSize=0
> maxForwardBdrsPerTransaction=0
> nextChannelToAllocate=0
> absoluteMaxForwardDatalen=0
> absoluteMaxReverseDatalen=0
> nextBlockedChannel=-1
> lookupQueue: depth=0, peek=0x0000000000000000
> ----------------
> pForwardHeaderPool=0x0000000008073EC0
> mlcChannelArray=0x0000000008073FA8
> pCommandChannel=0x0000000008073FF0
> grcState=0
> reverseDataStopped=0
> tryDot4=0
> tryPreDot4=0
> tryMlc=0
> requestedRevision=0xFFFF
> revision=0xFFFF
> maxRemoteSockets=32
> 
> Command channel:
> this=0x0000000008073FF0
> port=0
> channel=0
> localSocket=0
> pTransport=0x0000000008073DB0
> pMgr=0x0000000008073008
> pPhysicalPort=0x0000000008073008
> openingAnySetFlags=0x0010
> closingAnySetFlags=0x0124
> flags=0x0000
> countOpen=0
> countOpenFailure=0
> pService=0x0000000000000000
> scd=0x0000000000000000
> forwardDataPriority=0
> minBuffersRequired=0
> benefitOfMoreBuffers=0
> reverseDataBufferSize=0
> bufferCount=3
> remoteSocket=0
> maxForwardDatalen=0
> maxReverseDatalen=0
> countForwardData=0
> countReverseData=0
> countReverseBuffers=0
> countReverseBufferReturns=0
> lastReverseBuffer=0x0000000000000000
> currentForwardBuffer=0x0000000000000000
> currentGrabbedCredit=-1
> currentGrabbedTransaction=-1
> ----------------
> pMlcTransport=0x0000000008073DB0
> pCommandChannel=0x0000000008073FF0
> disableCreditCommands=1
> pForwardCreditRequestTimer=0x08074190
> pForwardCreditRequestMsg=0x0000000008074160
> pReverseCreditHeartbeatTimer=0x00000000080741F8
> pReverseCreditHeartbeatMsg=0x080741C8
> musherFirstCreditRequestDelay=2
> musherNextCreditRequestDelay=5
> gusherFirstCreditRequestDelay=5
> gusherNextCreditRequestDelay=10
> miserFirstCreditRequestDelay=0
> miserNextCreditRequestDelay=2
> gusherPiggybackCreditCount=1
> gusherCreditCount=2
> miserCreditRequestCount=2
> workaroundReverseCreditLoss=0
> maxForwardPacketSize=64
> maxReversePacketSize=64
> forwardCreditRequest=16
> forwardMaxOutstandingCredit=1
> forwardCredit: current=0, initial=0, low=0, high=0, max=65535
> lastCreditRequestGotUsNowhere=0
> reverseMaxOutstandingCredit=1
> reverseBuffersPerPacket=0
> uncreditedBuffers=3
> reverseCreditToGrant=0
> reverseCredit: current=0, initial=0, low=0, high=0, max=65535
> countSendPiggybackCredit=0
> countHandlePiggybackCredit=0
> countSendCredit=0
> countHandleCredit=0
> countHandleCreditAfterCreditRequest=0
> countSendCreditRequest=0
> countHandleCreditRequest=0
> countSendEmptyCreditRequestReply=0
> countHandleEmptyCreditRequestReply=0
> isGusher=-1
> ----------------
> pForwardCommandPool=0x0000000008074230
> pForwardNonconsumingQueue=0x0000000008074250
> pForwardReplyQueue=0x0000000008074260
> pForwardRequestQueue=0x0000000008074270
> forwardRequestCredit: current=0, initial=0, low=0, high=0, max=65535
> pCommandReplyTimer=0x00000000080742B0 (count=0)
> pCommandReplyTimeoutMsg=0x0000000008074280
> allowErrorPackets=1
> lastRequest=0xFFFFFFFF
> lastPsid=-1
> lastSsid=-1
> 
> Session 0: type=command
>          state=1
>          fd=8
>          scdlink=-1
>          pLookup=0x0000000008073888
>          outstandingForwardBdrCount=1
>          pReverseBdrQueue: depth=0
>          tcd=0x0000000000000000
>          pCommandBdr=0x00000000080786A0
>          pmlTrapsRegistered=0
>          bitbucketSocket=0
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by Demarc:
> A global provider of Threat Management Solutions.
> Download our HomeAdmin security software for free today!
> http://www.demarc.com/info/Sentarus/hamr30