Re: [hpoj-devel] installing hplip for a g85

[Cory M. <cor...@hp...>]

None of the hpoj stuff is required for hplip.

Cory
hplip team

On Mon, 2005-01-24 at 23:11 +0100, Barbara und Manfred Gehrke wrote:
> hi,
> 
> my g85 is now running with hplip. main problem was that after an kernel 
> upgrade  printing on usb was no longer possible. i then switch from ptal 
> to hplip.
> 
> but   /usr/lib/cups/backend/hp did not find the printer (a g85).
> 
> the reason was that at usb level the printer was not detected, though i 
> powered the printer on and off, unplugged and replugged it . looking 
> through all the usb and hotplugged settings showed nothing severe except 
> there was no printer found.
> 
> now - for some reason (one of the usb ports at my box may be 
> malfunctioning, or the fact that i just set up the printer in cups) not 
> quite clear to me - the printer is recognized and the rest of setting it 
> up took some minutes.
> 
> by the way is the printer.c stuff from ptal still necessary for hplip?
> 
> thanks and ciao
> 
> manfred
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> 
> _______________________________________________
> hpoj-devel mailing list
> hpo...@li...
> https://lists.sourceforge.net/lists/listinfo/hpoj-devel