Re: [hpoj-devel] Difficulty with PSC 1210

[bbales <bb...@co...>]

On Tuesday 14 December 2004 10:39, Till Kamppeter wrote:
> You have
>
> direct ptal:/mlc:usb:psc1200
>
> in your "lpinfo -v" output. This means that the old HPOJ is still
> running. You must stop HPOJ, otherwise HPLIP will not see your device.
> So do (the commands in parentheses if the first commands do not work,
> all commands logged in as root):
>
> chkconfig --del hpoj (or    mv /etc/ptal /etc/ptal.orig)
> service hpoj stop (or    /etc/init.d/hpoj stop)
>
The first command line, I had to use the one in parentheses:
]# /sbin/chkconfig --del hpoj
error reading information on service hpoj: No such file or directory
]# mv /etc/ptal /etc/ptal.orig

The second line, neither command seemed to work, but it looks to me that hpoj 
is stopped:
]# service hpoj stop
bash: service: command not found
]# /etc/init.d/hpoj stop
bash: /etc/init.d/hpoj: No such file or directory
]# locate hpoj |grep /etc
/etc/profile.d/hpoj.sh
/etc/profile.d/hpoj.csh
]# ps -ax |grep hpoj
20330 pts/2    S      0:00 grep hpoj
]#
]# /sbin/service hpoj stop
hpoj: unrecognized service
]#

But after "killall -HUP cupsd,"  lpinfo -v still doesn't show and hp printer.  
And neither does localhost:631.
]# /usr/sbin/lpinfo -v
network socket
direct hp:/no_device_found
network http
network ipp
network lpd
direct parallel:/dev/lp0
direct ptal
direct scsi
serial serial:/dev/ttyS0?baud=115200



> Then do
>
> killall -HUP cupsd
>
> and the device should get visible with "hp:/..." in the "lpinfo -v"
> output. And then you will be able to create the correct CUPS queue.
>
>     Till
>