Re: [hpoj-devel] 2610 driver for linux

[Joe P. <joe...@sn...>]

On Monday 13 December 2004 06:27, Camille-Aim=E9 Possama=EF wrote:
> Hi,
>
> The HP all-in-one 2610 does not seem to appear in the linuxprinting list.
> Does this PSC works as the 2410 that it (I guess) replaces ?

My USA-purchased Photosmart PSC 2610v is printing and scanning well under=20
Linux. I think this would be considered the same model.

The 2610v can be connected either of two ways: ethernet or USB, but not bot=
h=20
at the same time. It has an embedded Jet Direct device for direct network=20
printing. It also has an embedded web server which can be accessed for some=
=20
functions.

Connected through ethernet, printing and scanning work using hpoj. If you w=
ant=20
to set the printer up for ethernet connectivity, choose a static LAN IP=20
address for the printer though its panel, then configure the printer as a J=
et=20
Direct device with 'ptal-init setup' and CUPS.  When setting up a CUPS prin=
t=20
queue, if you don't see a list entry for the 2600 series, try choosing one=
=20
for the PSC 2500.

hplip (currently in development by the hpinkjet group) doesn't yet support=
=20
scanning over ethernet.

Connected through USB, eithor hpoj or hplip should work. I haven't yet trie=
d=20
to use the 2610 connected through USB, though.

=2D-=20
Joe Piolunek