Re: [hpoj-devel] Re: PSC 1210 and USB working on FreeBSD?

[Raphael L. <rap...@gm...>]

On Saturday 23 October 2004 13:27, Raphael Langerhorst wrote:
> On Thursday 21 October 2004 09:43, Volker Stolz wrote:
> > * Raphael Langerhorst <rap...@gm...>:
> > >> No special code is required -- just a minimal addition to the
> > >> ptal-init-script where 'moreWildcards' is defined. I didn't
> > >> get a concrete patch out of him and lack the hardware to test
> > >> this myself (luckily only JetDirect here :).
> > >> If you use the FreeBSD port, it should take of finding libusb
> > >> etc, so the above should be the only change required.
> > >
> > > OK, found it, thanks a lot!
> >
> > Jeff pointed out you might have to unload the USB-modules umass
> > and ulpt, though, since those will capture the device -- ugen is
> > only available if the device is not assigned to one of the above.
> > Also, this won't work if you have them compiled into the kernel.
>
> Ah, yes, I just noticed that the device gets attached as ulpt0. I
> think I have the devices in the kernel... will remove them and
> rebuild kernel.
>
> Thanks,
> Raphael
>
> PS: I just tried it (with ulpt0) out with a fresh 5.3-RC1 and it
> didn't work... When I have removed the devices and rebuilt the
> kernel I'll report back.
>
> > [Jeff, are you lurking here?]

OK, I just tried things out, I had a CVS checkout of around February 
and it seems I can't check out current CVS versions (what's the 
server adress). It didn't work but the device was recognised :) Still 
there is some communication error....

Can maybe anyone send me a tar ball with the latest source?

Thanks a lot,
Raphael

-- 
G System, The Evolving Universe - http://www.g-system.at