Re: [hpoj-devel] psc1340 / psc_1300_series print connection failed after reboot

[Dr. J. <joa...@on...>]

setting up in CUPS with localhost:631/admin, connected to PTAL device, usin=
g=20
hpijs; worked fine after the installation.

after reboot printing failed and when I go through the Cups setup once more=
=20
there is a massage: PTAL device not found.


in the bash:
 # ptal-connect mlc:usb:psc_1300_series -service PTAL_MLCP_DUMP
ptal-connect: connecting to device "mlc:usb:psc_1300_series"...  failed!

I don't know what changes after reboot

Joachim


Nachricht vom Dienstag 12 Oktober 2004 17:44 :
> What are the error messages that you are receiving? How are you going
> about setting up the printer in CUPS?
>
> Cory
>
> On Mon, 2004-10-11 at 22:01, Dr. Joachim V=F6lcker wrote:
> > using Suse 8.1 and compiling hpoj-0.91 (including libusb, libusb-devel);
> > with psc1340 scaning and printing (cupps) worked after installation.
> >
> > After reboot only scaner works, ptal-print connection failed
> > ptal-init starts before cupps;
> > fstab mounts the device;
> > Any ideas? Which kernel-modules are nessesary?
> >
> > Joachim
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
> > Use IT products in your business? Tell us what you think of them. Give =
us
> > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out
> > more http://productguide.itmanagersjournal.com/guidepromo.tmpl
> >
> > _______________________________________________
> > hpoj-devel mailing list
> > hpo...@li...
> > https://lists.sourceforge.net/lists/listinfo/hpoj-devel