Re: [hpoj-devel] Cannot get HP5510 to print

[Hal V. <ha...@th...>]

On Wednesday 11 August 2004 11:47 am, Hal Vaughan wrote:
> I bought a HP 5510 last night and was up most of the night trying to get it
> to work.  (I need to have a printer working ASAP and am close to returning
> this and getting a Brother 1440 laserprinter because it just won't work.)
>
> I am using Libranet, so when I hooked up the printer, I used apt-get to
> install hpoj and hpijs.  (I haven't seen it specifically stated, but I
> assume I need both of these, hpoj to scan and hpijs to print -- is that
> right?).  I am using a 2.4.21 kernel.  The hpijs version is 1.5.

I saw a reference to some problems in the USB drivers before the 2.4.7 kernel.  
Will this kernel work, or do I need a later one?

Hal

> Originally when I installed hpoj (again, with apt-get), ptal-init asked me
> all the questions, and within a few minutes I was able to use the scanner.
> Considering the last time I had tried a scanner on Linux was over 3 years
> ago, and it was damn near impossible to get it to work, I was excited.
>
> Then I tried to install the printer.  I used the KDE control panel and
> pulled up the printer screen to install the printer in CUPS (if you haven't
> used it, it has a few more features than the web control panel for CUPS). 
> The first time I did this, I admit I didn't read the instructions.  I tried
> to install it as the 1st USB printer, and got messages that
> usb:/dev/usb/lp0 did not exist.  I deleted the printer from CUPS, restarted
> CUPS, and re-installed (this time, in the printer list, CUPS specified
> ptal:mlc:usb:hp5510 --I changed the name to hp5510 for brevity).  It
> installed and I tried to print a test page.  I got the dialog that said
> CUPS sent the test page successfully, I pressed Okay to continue,
> configured the printer, and waited.  No test page.
>
> I have uninstalled and reinstalled this a number of times.  I am getting
> the status display (on the web control panel for CUPS) Printer State:
> stopped, accepting jobs.
>
> I've tried ptal-print and it cannot connect to the printer.  I tried
> ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP and I get a dump
> (included at the end of this, in case it helps).  I tried ptal-connect
> mlc:usb:hp5510 -service echo and I cannot connect.
>
> It seems I can scan (some programs seem to have trouble, but the SANE gui
> frontend allowed me to scan an image in perfectly).  I can use scanimage
> --list-devices and it shows up.   If I scanimage --test, I get a successful
> report.  I don't know if this printer has an echo service, so I don't know
> if ptal-connect mlc:usb:hp5510 -service echo is a sign of the problem or
> not.
>
> I really want to get this working, since it would solve my
> scanner/fax/printer/copier needs with one shot and because I like HP
> products (they usually have good Linux support and are reliable), but I
> have to be practical.  I cannot waste a lot of time on this.  I have to
> have a printer working today, and I have to get back to my other work, so
> any help is GREATLY appreciated.
>
> Thanks!
>
> Hal
>
> Output from ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP:
>
> ptal-connect: connecting to device "mlc:usb:hp5510"...  successful.
>
> ExMgr:
> pid=13637
> gDebugFlag=0
> pBufferPool: available#=2, size=4102, requested#=230, allocated#=3
> noFork=0
> stayActivated=0
> noDrain=0
> forceMlcDot4=0
> noDot4=0
> noPmlMultiplexing=0
> sleepBeforeOpen=0
> initialized=1
> fd=5: read=1, write=0
> fd=8: read=1, write=0
> fd=9: read=1, write=0
> fdCount=10
> exContext=2
> exState=2
> exActivateCount=1
> exCloseCount=0
> exCloseReason=0x0000
> exReactivateFlag=0
> tryDot4=1
> tryMlc=1
> transportMode=2=1284.4
> miser=0
> argcOriginal=22
> argvOriginal:  "mlc:usb:hp5510" "-devidmatch" "MDL:officejet 5500 series;"
> "-devidmatch" "SN:MY44CF101396;" "-device" "/dev/usb/lp0" "/dev/usb/lp1"
> "/dev/usb/lp10" "/dev/usb/lp11" "/dev/usb/lp12" "/dev/usb/lp13"
> "/dev/usb/lp14" "/dev/usb/lp15" "/dev/usb/lp2" "/dev/usb/lp3"
> "/dev/usb/lp4" "/dev/usb/lp5" "/dev/usb/lp6" "/dev/usb/lp7" "/dev/usb/lp8"
> "/dev/usb/lp9" argc=0
> fdNull=4
> pFreeMsgPool: depth=2
> pPendingMsgQueue: depth=0
> pActiveTimerQueue: depth=0
> pPeriodicTimerQueue: depth=1
> select timeout: sec=0, usec=500000, infinite=0
> consoleAllowRemote=0
> consoleOldStdin=6
> consoleOldStdout=7
> consoleIsRemote=0
> socketSuffix=<usb:hp5510>
> socketAliasSuffix=<>
> socketName=</var/run/ptal-mlcd/usb:hp5510>
> socketAliasName=<>
> socketFd=5
> pmlTransportSession=8
> pmlCurrentSession=-1
> pmlLastSession=24
> llioPossibleName[0]=</dev/usb/lp0>
> llioPossibleName[1]=</dev/usb/lp1>
> llioPossibleName[2]=</dev/usb/lp10>
> llioPossibleName[3]=</dev/usb/lp11>
> llioPossibleName[4]=</dev/usb/lp12>
> llioPossibleName[5]=</dev/usb/lp13>
> llioPossibleName[6]=</dev/usb/lp14>
> llioPossibleName[7]=</dev/usb/lp15>
> llioPossibleName[8]=</dev/usb/lp2>
> llioPossibleName[9]=</dev/usb/lp3>
> llioPossibleName[10]=</dev/usb/lp4>
> llioPossibleName[11]=</dev/usb/lp5>
> llioPossibleName[12]=</dev/usb/lp6>
> llioPossibleName[13]=</dev/usb/lp7>
> llioPossibleName[14]=</dev/usb/lp8>
> llioPossibleName[15]=</dev/usb/lp9>
> llioPossibleNameCount=16
> llioName=</dev/usb/lp0>
> llioOverrideDeviceID=<>
> llioMatchDeviceID[0]=<MDL:officejet 5500 series;>
> llioMatchDeviceID[1]=<SN:MY44CF101396;>
> llioMatchDeviceIDCount=2
> llioFd=9
> llioDummyFd=-1
> llioPollState=2
> llioLastHitTime=1092238335
> llioForwardBdrQueue: depth=0
> llioDeviceID=<MFG:hp;MDL:officejet 5500
> series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0
>380008000020020002c1480062c2500062;Z:007;>
> llioSavedDeviceID=<MFG:hp;MDL:officejet 5500
> series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0
>380008000020020002c1480062c2500062;Z:007;> llioBusAddress=2
> llioDeviceAddress=7
> llioVendorID=0x03F0
> llioProductID=0x3A11
> llioCurrentProtocol=2
> llioSupportedProtocols=0x04
>
> Transport:
> this=0x08069300
> port=0
> pMgr=0x08068628
> pPhysicalPort=0x08068628
> forwardTransactionCounter: current=128, initial=128, low=126, high=128,
> max=128
> channelCount=17
> channelArray=0x080694F0
> channelArray[0]=0x08069538
> channelArray[1]=0x08069830
> channelArray[2]=0x08069A30
> channelArray[3]=0x08069C30
> channelArray[4]=0x08069E30
> channelArray[5]=0x0806A030
> channelArray[6]=0x0806A230
> channelArray[7]=0x0806A430
> channelArray[8]=0x0806A630
> channelArray[9]=0x0806A830
> channelArray[10]=0x0806AA30
> channelArray[11]=0x0806AC30
> channelArray[12]=0x0806AE30
> channelArray[13]=0x0806B030
> channelArray[14]=0x0806B230
> channelArray[15]=0x0806B430
> channelArray[16]=0x0806B630
> overheadBufferCount=0
> pNextTransport=0x00000000
> pForwardDataTimer=0x080693C8 (count=0)
> pForwardDataTimeoutMsg=0x08069398
> reverseDataBufferCount=180
> reverseDataBufferSize=4102
> maxForwardBdrsPerTransaction=4
> nextChannelToAllocate=17
> nextBlockedChannel=-1
> lookupQueue: depth=0, peek=0x00000000
> ----------------
> pForwardHeaderPool=0x08069408
> mlcChannelArray=0x080694F0
> pCommandChannel=0x08069538
> grcState=0
> reverseDataStopped=0
> tryDot4=1
> tryPreDot4=0
> tryMlc=1
> requestedRevision=0x20
> revision=0x20
> maxRemoteSockets=32
>
> Command channel:
> this=0x08069538
> port=0
> channel=0
> localSocket=0
> pTransport=0x08069300
> pMgr=0x08068628
> pPhysicalPort=0x08068628
> openingAnySetFlags=0x0010
> closingAnySetFlags=0x0124
> flags=0x0003
> countOpen=0
> countOpenFailure=0
> pService=0x00000000
> scd=0x00000000
> forwardDataPriority=0
> minBuffersRequired=0
> benefitOfMoreBuffers=0
> reverseDataBufferSize=4102
> bufferCount=3
> remoteSocket=0
> maxForwardDatalen=58
> maxReverseDatalen=58
> countForwardData=38
> countReverseData=38
> countReverseBuffers=38
> countReverseBufferReturns=38
> lastReverseBuffer=0x00000000
> currentForwardBuffer=0x00000000
> currentGrabbedCredit=-1
> currentGrabbedTransaction=-1
> ----------------
> pMlcTransport=0x08069300
> pCommandChannel=0x08069538
> disableCreditCommands=1
> pForwardCreditRequestTimer=0x080696D0
> pForwardCreditRequestMsg=0x080696A0
> pReverseCreditHeartbeatTimer=0x08069738
> pReverseCreditHeartbeatMsg=0x08069708
> musherFirstCreditRequestDelay=2
> musherNextCreditRequestDelay=5
> gusherFirstCreditRequestDelay=5
> gusherNextCreditRequestDelay=10
> miserFirstCreditRequestDelay=0
> miserNextCreditRequestDelay=2
> gusherPiggybackCreditCount=1
> gusherCreditCount=2
> miserCreditRequestCount=2
> workaroundReverseCreditLoss=0
> maxForwardPacketSize=64
> maxReversePacketSize=64
> forwardCreditRequest=16
> forwardMaxOutstandingCredit=1
> forwardCredit: current=1, initial=1, low=0, high=2, max=65535
> lastCreditRequestGotUsNowhere=0
> reverseMaxOutstandingCredit=1
> reverseBuffersPerPacket=1
> uncreditedBuffers=0
> reverseCreditToGrant=2
> reverseCredit: current=1, initial=1, low=0, high=2, max=65535
> countSendPiggybackCredit=38
> countHandlePiggybackCredit=38
> countSendCredit=0
> countHandleCredit=0
> countHandleCreditAfterCreditRequest=0
> countSendCreditRequest=0
> countHandleCreditRequest=0
> countSendEmptyCreditRequestReply=0
> countHandleEmptyCreditRequestReply=0
> isGusher=1
> ----------------
> pForwardCommandPool=0x08069770
> pForwardNonconsumingQueue=0x08069790
> pForwardReplyQueue=0x080697A0
> pForwardRequestQueue=0x080697B0
> forwardRequestCredit: current=1, initial=1, low=0, high=1, max=65535
> pCommandReplyTimer=0x080697F0 (count=0)
> pCommandReplyTimeoutMsg=0x080697C0
> allowErrorPackets=1
> lastPsid=-1
> lastSsid=-1
>
> Session 0: type=command
>         state=1
>         fd=8
>         scdlink=-1
>         pLookup=0x08068DE8
>         outstandingForwardBdrCount=1
>         pReverseBdrQueue: depth=0
>         tcd=0x00000000
>         pCommandBdr=0x0806DA38
>         pmlTrapsRegistered=0
>         bitbucketSocket=0
>
> Session 8: type=transport
>         state=6
>         fd=10
>         scdlink=-1
>         pLookup=0x080690E8
>         outstandingForwardBdrCount=0
>         pReverseBdrQueue: depth=0
>         tcd=0x08069830
>         pCommandBdr=0x00000000
>         pmlTrapsRegistered=0
>         bitbucketSocket=0
>
> Transport channel for session 8:
> this=0x08069830
> port=0
> channel=1
> localSocket=128
> pTransport=0x08069300
> pMgr=0x08068628
> pPhysicalPort=0x08068628
> openingAnySetFlags=0x0010
> closingAnySetFlags=0x0124
> flags=0x0003
> countOpen=1
> countOpenFailure=0
> pService=0x08068628
> scd=0x00000008
> forwardDataPriority=0
> minBuffersRequired=10
> benefitOfMoreBuffers=1
> reverseDataBufferSize=4102
> bufferCount=12
> remoteSocket=1
> maxForwardDatalen=2046
> maxReverseDatalen=2046
> countForwardData=2
> countReverseData=2
> countReverseBuffers=2
> countReverseBufferReturns=2
> lastReverseBuffer=0x0806DA38
> currentForwardBuffer=0x00000000
> currentGrabbedCredit=-1
> currentGrabbedTransaction=-1
> ----------------
> pMlcTransport=0x08069300
> pCommandChannel=0x08069538
> disableCreditCommands=0
> pForwardCreditRequestTimer=0x08069990
> pForwardCreditRequestMsg=0x08069960
> pReverseCreditHeartbeatTimer=0x080699F8
> pReverseCreditHeartbeatMsg=0x080699C8
> musherFirstCreditRequestDelay=2
> musherNextCreditRequestDelay=5
> gusherFirstCreditRequestDelay=5
> gusherNextCreditRequestDelay=10
> miserFirstCreditRequestDelay=0
> miserNextCreditRequestDelay=2
> gusherPiggybackCreditCount=1
> gusherCreditCount=2
> miserCreditRequestCount=2
> workaroundReverseCreditLoss=0
> maxForwardPacketSize=2052
> maxReversePacketSize=2052
> forwardCreditRequest=16
> forwardMaxOutstandingCredit=65535
> forwardCredit: current=1, initial=0, low=0, high=1, max=65535
> lastCreditRequestGotUsNowhere=0
> reverseMaxOutstandingCredit=65535
> reverseBuffersPerPacket=1
> uncreditedBuffers=0
> reverseCreditToGrant=0
> reverseCredit: current=12, initial=12, low=11, high=12, max=65535
> countSendPiggybackCredit=0
> countHandlePiggybackCredit=0
> countSendCredit=3
> countHandleCredit=3
> countHandleCreditAfterCreditRequest=0
> countSendCreditRequest=0
> countHandleCreditRequest=0
> countSendEmptyCreditRequestReply=0
> countHandleEmptyCreditRequestReply=0
> isGusher=1
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
> 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
> Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
> http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
>
> _______________________________________________
> hpoj-devel mailing list
> hpo...@li...
> https://lists.sourceforge.net/lists/listinfo/hpoj-devel