Menu
▾
▴
[hpoj-devel] Cannot get HP5510 to print
|
From: Hal V. <ha...@th...> - 2004-08-11 15:46:58
|
I bought a HP 5510 last night and was up most of the night trying to get it to
work. (I need to have a printer working ASAP and am close to returning this
and getting a Brother 1440 laserprinter because it just won't work.)
I am using Libranet, so when I hooked up the printer, I used apt-get to
install hpoj and hpijs. (I haven't seen it specifically stated, but I assume
I need both of these, hpoj to scan and hpijs to print -- is that right?). I
am using a 2.4.21 kernel. The hpijs version is 1.5.
Originally when I installed hpoj (again, with apt-get), ptal-init asked me all
the questions, and within a few minutes I was able to use the scanner.
Considering the last time I had tried a scanner on Linux was over 3 years
ago, and it was damn near impossible to get it to work, I was excited.
Then I tried to install the printer. I used the KDE control panel and pulled
up the printer screen to install the printer in CUPS (if you haven't used it,
it has a few more features than the web control panel for CUPS). The first
time I did this, I admit I didn't read the instructions. I tried to install
it as the 1st USB printer, and got messages that usb:/dev/usb/lp0 did not
exist. I deleted the printer from CUPS, restarted CUPS, and re-installed
(this time, in the printer list, CUPS specified ptal:mlc:usb:hp5510 --I
changed the name to hp5510 for brevity). It installed and I tried to print a
test page. I got the dialog that said CUPS sent the test page successfully,
I pressed Okay to continue, configured the printer, and waited. No test
page.
I have uninstalled and reinstalled this a number of times. I am getting the
status display (on the web control panel for CUPS) Printer State: stopped,
accepting jobs.
I've tried ptal-print and it cannot connect to the printer. I tried
ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP and I get a dump
(included at the end of this, in case it helps). I tried ptal-connect
mlc:usb:hp5510 -service echo and I cannot connect.
It seems I can scan (some programs seem to have trouble, but the SANE gui
frontend allowed me to scan an image in perfectly). I can use scanimage
--list-devices and it shows up. If I scanimage --test, I get a successful
report. I don't know if this printer has an echo service, so I don't know if
ptal-connect mlc:usb:hp5510 -service echo is a sign of the problem or not.
I really want to get this working, since it would solve my
scanner/fax/printer/copier needs with one shot and because I like HP products
(they usually have good Linux support and are reliable), but I have to be
practical. I cannot waste a lot of time on this. I have to have a printer
working today, and I have to get back to my other work, so any help is
GREATLY appreciated.
Thanks!
Hal
Output from ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP:
ptal-connect: connecting to device "mlc:usb:hp5510"... successful.
ExMgr:
pid=13637
gDebugFlag=0
pBufferPool: available#=2, size=4102, requested#=230, allocated#=3
noFork=0
stayActivated=0
noDrain=0
forceMlcDot4=0
noDot4=0
noPmlMultiplexing=0
sleepBeforeOpen=0
initialized=1
fd=5: read=1, write=0
fd=8: read=1, write=0
fd=9: read=1, write=0
fdCount=10
exContext=2
exState=2
exActivateCount=1
exCloseCount=0
exCloseReason=0x0000
exReactivateFlag=0
tryDot4=1
tryMlc=1
transportMode=2=1284.4
miser=0
argcOriginal=22
argvOriginal: "mlc:usb:hp5510" "-devidmatch" "MDL:officejet 5500 series;"
"-devidmatch" "SN:MY44CF101396;" "-device" "/dev/usb/lp0" "/dev/usb/lp1"
"/dev/usb/lp10" "/dev/usb/lp11" "/dev/usb/lp12" "/dev/usb/lp13"
"/dev/usb/lp14" "/dev/usb/lp15" "/dev/usb/lp2" "/dev/usb/lp3" "/dev/usb/lp4"
"/dev/usb/lp5" "/dev/usb/lp6" "/dev/usb/lp7" "/dev/usb/lp8" "/dev/usb/lp9"
argc=0
fdNull=4
pFreeMsgPool: depth=2
pPendingMsgQueue: depth=0
pActiveTimerQueue: depth=0
pPeriodicTimerQueue: depth=1
select timeout: sec=0, usec=500000, infinite=0
consoleAllowRemote=0
consoleOldStdin=6
consoleOldStdout=7
consoleIsRemote=0
socketSuffix=<usb:hp5510>
socketAliasSuffix=<>
socketName=</var/run/ptal-mlcd/usb:hp5510>
socketAliasName=<>
socketFd=5
pmlTransportSession=8
pmlCurrentSession=-1
pmlLastSession=24
llioPossibleName[0]=</dev/usb/lp0>
llioPossibleName[1]=</dev/usb/lp1>
llioPossibleName[2]=</dev/usb/lp10>
llioPossibleName[3]=</dev/usb/lp11>
llioPossibleName[4]=</dev/usb/lp12>
llioPossibleName[5]=</dev/usb/lp13>
llioPossibleName[6]=</dev/usb/lp14>
llioPossibleName[7]=</dev/usb/lp15>
llioPossibleName[8]=</dev/usb/lp2>
llioPossibleName[9]=</dev/usb/lp3>
llioPossibleName[10]=</dev/usb/lp4>
llioPossibleName[11]=</dev/usb/lp5>
llioPossibleName[12]=</dev/usb/lp6>
llioPossibleName[13]=</dev/usb/lp7>
llioPossibleName[14]=</dev/usb/lp8>
llioPossibleName[15]=</dev/usb/lp9>
llioPossibleNameCount=16
llioName=</dev/usb/lp0>
llioOverrideDeviceID=<>
llioMatchDeviceID[0]=<MDL:officejet 5500 series;>
llioMatchDeviceID[1]=<SN:MY44CF101396;>
llioMatchDeviceIDCount=2
llioFd=9
llioDummyFd=-1
llioPollState=2
llioLastHitTime=1092238335
llioForwardBdrQueue: depth=0
llioDeviceID=<MFG:hp;MDL:officejet 5500
series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0380008000020020002c1480062c2500062;Z:007;>
llioSavedDeviceID=<MFG:hp;MDL:officejet 5500
series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0380008000020020002c1480062c2500062;Z:007;>
llioBusAddress=2
llioDeviceAddress=7
llioVendorID=0x03F0
llioProductID=0x3A11
llioCurrentProtocol=2
llioSupportedProtocols=0x04
Transport:
this=0x08069300
port=0
pMgr=0x08068628
pPhysicalPort=0x08068628
forwardTransactionCounter: current=128, initial=128, low=126, high=128,
max=128
channelCount=17
channelArray=0x080694F0
channelArray[0]=0x08069538
channelArray[1]=0x08069830
channelArray[2]=0x08069A30
channelArray[3]=0x08069C30
channelArray[4]=0x08069E30
channelArray[5]=0x0806A030
channelArray[6]=0x0806A230
channelArray[7]=0x0806A430
channelArray[8]=0x0806A630
channelArray[9]=0x0806A830
channelArray[10]=0x0806AA30
channelArray[11]=0x0806AC30
channelArray[12]=0x0806AE30
channelArray[13]=0x0806B030
channelArray[14]=0x0806B230
channelArray[15]=0x0806B430
channelArray[16]=0x0806B630
overheadBufferCount=0
pNextTransport=0x00000000
pForwardDataTimer=0x080693C8 (count=0)
pForwardDataTimeoutMsg=0x08069398
reverseDataBufferCount=180
reverseDataBufferSize=4102
maxForwardBdrsPerTransaction=4
nextChannelToAllocate=17
nextBlockedChannel=-1
lookupQueue: depth=0, peek=0x00000000
----------------
pForwardHeaderPool=0x08069408
mlcChannelArray=0x080694F0
pCommandChannel=0x08069538
grcState=0
reverseDataStopped=0
tryDot4=1
tryPreDot4=0
tryMlc=1
requestedRevision=0x20
revision=0x20
maxRemoteSockets=32
Command channel:
this=0x08069538
port=0
channel=0
localSocket=0
pTransport=0x08069300
pMgr=0x08068628
pPhysicalPort=0x08068628
openingAnySetFlags=0x0010
closingAnySetFlags=0x0124
flags=0x0003
countOpen=0
countOpenFailure=0
pService=0x00000000
scd=0x00000000
forwardDataPriority=0
minBuffersRequired=0
benefitOfMoreBuffers=0
reverseDataBufferSize=4102
bufferCount=3
remoteSocket=0
maxForwardDatalen=58
maxReverseDatalen=58
countForwardData=38
countReverseData=38
countReverseBuffers=38
countReverseBufferReturns=38
lastReverseBuffer=0x00000000
currentForwardBuffer=0x00000000
currentGrabbedCredit=-1
currentGrabbedTransaction=-1
----------------
pMlcTransport=0x08069300
pCommandChannel=0x08069538
disableCreditCommands=1
pForwardCreditRequestTimer=0x080696D0
pForwardCreditRequestMsg=0x080696A0
pReverseCreditHeartbeatTimer=0x08069738
pReverseCreditHeartbeatMsg=0x08069708
musherFirstCreditRequestDelay=2
musherNextCreditRequestDelay=5
gusherFirstCreditRequestDelay=5
gusherNextCreditRequestDelay=10
miserFirstCreditRequestDelay=0
miserNextCreditRequestDelay=2
gusherPiggybackCreditCount=1
gusherCreditCount=2
miserCreditRequestCount=2
workaroundReverseCreditLoss=0
maxForwardPacketSize=64
maxReversePacketSize=64
forwardCreditRequest=16
forwardMaxOutstandingCredit=1
forwardCredit: current=1, initial=1, low=0, high=2, max=65535
lastCreditRequestGotUsNowhere=0
reverseMaxOutstandingCredit=1
reverseBuffersPerPacket=1
uncreditedBuffers=0
reverseCreditToGrant=2
reverseCredit: current=1, initial=1, low=0, high=2, max=65535
countSendPiggybackCredit=38
countHandlePiggybackCredit=38
countSendCredit=0
countHandleCredit=0
countHandleCreditAfterCreditRequest=0
countSendCreditRequest=0
countHandleCreditRequest=0
countSendEmptyCreditRequestReply=0
countHandleEmptyCreditRequestReply=0
isGusher=1
----------------
pForwardCommandPool=0x08069770
pForwardNonconsumingQueue=0x08069790
pForwardReplyQueue=0x080697A0
pForwardRequestQueue=0x080697B0
forwardRequestCredit: current=1, initial=1, low=0, high=1, max=65535
pCommandReplyTimer=0x080697F0 (count=0)
pCommandReplyTimeoutMsg=0x080697C0
allowErrorPackets=1
lastPsid=-1
lastSsid=-1
Session 0: type=command
state=1
fd=8
scdlink=-1
pLookup=0x08068DE8
outstandingForwardBdrCount=1
pReverseBdrQueue: depth=0
tcd=0x00000000
pCommandBdr=0x0806DA38
pmlTrapsRegistered=0
bitbucketSocket=0
Session 8: type=transport
state=6
fd=10
scdlink=-1
pLookup=0x080690E8
outstandingForwardBdrCount=0
pReverseBdrQueue: depth=0
tcd=0x08069830
pCommandBdr=0x00000000
pmlTrapsRegistered=0
bitbucketSocket=0
Transport channel for session 8:
this=0x08069830
port=0
channel=1
localSocket=128
pTransport=0x08069300
pMgr=0x08068628
pPhysicalPort=0x08068628
openingAnySetFlags=0x0010
closingAnySetFlags=0x0124
flags=0x0003
countOpen=1
countOpenFailure=0
pService=0x08068628
scd=0x00000008
forwardDataPriority=0
minBuffersRequired=10
benefitOfMoreBuffers=1
reverseDataBufferSize=4102
bufferCount=12
remoteSocket=1
maxForwardDatalen=2046
maxReverseDatalen=2046
countForwardData=2
countReverseData=2
countReverseBuffers=2
countReverseBufferReturns=2
lastReverseBuffer=0x0806DA38
currentForwardBuffer=0x00000000
currentGrabbedCredit=-1
currentGrabbedTransaction=-1
----------------
pMlcTransport=0x08069300
pCommandChannel=0x08069538
disableCreditCommands=0
pForwardCreditRequestTimer=0x08069990
pForwardCreditRequestMsg=0x08069960
pReverseCreditHeartbeatTimer=0x080699F8
pReverseCreditHeartbeatMsg=0x080699C8
musherFirstCreditRequestDelay=2
musherNextCreditRequestDelay=5
gusherFirstCreditRequestDelay=5
gusherNextCreditRequestDelay=10
miserFirstCreditRequestDelay=0
miserNextCreditRequestDelay=2
gusherPiggybackCreditCount=1
gusherCreditCount=2
miserCreditRequestCount=2
workaroundReverseCreditLoss=0
maxForwardPacketSize=2052
maxReversePacketSize=2052
forwardCreditRequest=16
forwardMaxOutstandingCredit=65535
forwardCredit: current=1, initial=0, low=0, high=1, max=65535
lastCreditRequestGotUsNowhere=0
reverseMaxOutstandingCredit=65535
reverseBuffersPerPacket=1
uncreditedBuffers=0
reverseCreditToGrant=0
reverseCredit: current=12, initial=12, low=11, high=12, max=65535
countSendPiggybackCredit=0
countHandlePiggybackCredit=0
countSendCredit=3
countHandleCredit=3
countHandleCreditAfterCreditRequest=0
countSendCreditRequest=0
countHandleCreditRequest=0
countSendEmptyCreditRequestReply=0
countHandleEmptyCreditRequestReply=0
isGusher=1
|
