Re: [hpoj-devel] (no subject)

[Cory M. <cor...@hp...>]

Did you compile from source or is this an RPM? If source, be sure to
install the libusb-devel package prior to compiling...

Cory
hp linux printing team

On Wed, 2004-07-07 at 14:14, Matthias Schorer wrote:
> Hi Folks,
>=20
> I have used an HP OfficeJet 5110 with hpoj successfully for more than=20
> one year on a SuSE Linux 8.2 System with vanilla Kernel
>=20
> Here's what uname -a reports: Linux matze 2.4.20-4GB-athlon #1 Mon Mar=20
> 17 17:56:47 UTC 2003 i686 unknown unknown GNU/Linux
>=20
> Then I got a new HP OfficeJet 5510, and since I did that I can not=20
> print anymore, even after installing the latest version of hpoj 0.91=20
> and hpijs 1.6
>=20
> I did a complete ptal-init setup which went through ok.
>=20
> here's the diagnostic
>=20
> ptal-device
> mlc:usb:officejet_5500_series
>=20
> ptal-hp device
> Model name:        officejet 5500 series
> Model number:      Q3435A
> Serial number:     MY418F20Y896
> Firmware version:  R0036xxNx
> Firmware datecode: (unavailable)
>=20
>=20
> ptal-hp clock
> Device clock: 7-Jul-2004 23:02:55
>=20
> The echo service of the device is working as well and I can use the=20
> scanner !
>=20
> But when I try to print I get the following errors in /var/log/messages
>=20
> ----- snip ------
> Jul  7 21:17:30 matze ptal-mlcd: SYSLOG at ExMgr.cpp:701,=20
> dev=3D<mlc:usb:officejet_5500_series>, pid=3D21110, e=3D2         ptal-ml=
cd=20
> successfully initialized. Jul  7 21:17:30 matze ptal-printd:=20
> ptal-printd(mlc:usb:officejet_5500_series) successfully initialized=20
> using /var/run/ptal-printd/mlc_usb_officejet_5500_series*.
>=20
> Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=3Dvmnet8 OUT=3D=20
> MAC=3D SRC=3D192.168.212.1 DST=3D192.168.212.255 LEN=3D189 TOS=3D0x00 PRE=
C=3D0x00=20
> TTL=3D64 ID=3D3327 DF PROTO=3DUDP SPT=3D631 DPT=3D631 LEN=3D169
>=20
> Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=3Deth1 OUT=3D MAC=
=3D=20
> SRC=3D192.168.22.1 DST=3D192.168.22.255 LEN=3D188 TOS=3D0x00 PREC=3D0x00 =
TTL=3D64=20
> ID=3D3328 DF PROTO=3DUDP SPT=3D631 DPT=3D631 LEN=3D168
>=20
> Jul  7 21:17:36 matze kernel: SuSE-FW-DROP-ANTI-SPOOFING IN=3Deth0 OUT=3D=
=20
> MAC=3D SRC=3D192.168.50.1 DST=3D192.168.50.255 LEN=3D181 TOS=3D0x00 PREC=
=3D0x00=20
> TTL=3D64 ID=3D3329 DF PROTO=3DUDP SPT=3D631 DPT=3D631 LEN=3D161
>=20
> Jul  7 21:17:37 matze ptal-mlcd: ERROR at ExMgr.cpp:2469,=20
> dev=3D<mlc:usb:officejet_5500_series@/dev/usb/lp6>, pid=3D21110, e=3D19  =
    =20
>    Couldn't find device: llioOpenOne failed!
> ----- snip -------
>=20
> I have then  changed the line in the ptal configuration=20
> /etc/ptal/mlc:usb:officejet_5500_series to be init.mlcd.append+=3D-device=
=20
> /dev/usb/lp0
>=20
> Now I don't get any messages anymore, but the ptal-connect -print=20
> command still returns failed.
>=20
> When I switch the printer off and on again my current terminal shows=20
> the following messages:
>=20
> ----- snip ---
> ptal-mlcd: ERROR at ExMgr.cpp:2744,=20
> dev=3D<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=3D30270, e=3D19
> llioService: llioRead returns -1, expected=3D6!
>=20
> ptal-mlcd: ERROR at ExMgr.cpp:902,=20
> dev=3D<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=3D30270, e=3D19
> exClose(reason=3D0x0010)
> ---- snip -----
>=20
> It would be great if someone coult help me out here !
>=20
> Thanks in advance
>=20
> Matthias Schorer
>=20
> Stiftsbogen 31, 81375 M=C3=BCnchen, Germany
> Tel: +49 89 5796 7923
> Fax: + 49 89 5796 7925
> Mobile: +49 172 853 5093
>=20
>=20
>=20
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -=20
> digital self defense, top technical experts, no vendor pitches,=20
> unmatched networking opportunities. Visit www.blackhat.com
>=20
> _______________________________________________
> hpoj-devel mailing list
> hpo...@li...
> https://lists.sourceforge.net/lists/listinfo/hpoj-devel