[hpoj-devel] (no subject)

[Matthias S. <mat...@we...>]

Hi Folks,

I have used an HP OfficeJet 5110 with hpoj successfully for more than=20
one year on a SuSE Linux 8.2 System with vanilla Kernel

Here's what uname -a reports: Linux matze 2.4.20-4GB-athlon #1 Mon Mar=20=

17 17:56:47 UTC 2003 i686 unknown unknown GNU/Linux

Then I got a new HP OfficeJet 5510, and since I did that I can not=20
print anymore, even after installing the latest version of hpoj 0.91=20
and hpijs 1.6

I did a complete ptal-init setup which went through ok.

here's the diagnostic

ptal-device
mlc:usb:officejet_5500_series

ptal-hp device
Model name:        officejet 5500 series
Model number:      Q3435A
Serial number:     MY418F20Y896
Firmware version:  R0036xxNx
Firmware datecode: (unavailable)


ptal-hp clock
Device clock: 7-Jul-2004 23:02:55

The echo service of the device is working as well and I can use the=20
scanner !

But when I try to print I get the following errors in /var/log/messages

----- snip ------
Jul  7 21:17:30 matze ptal-mlcd: SYSLOG at ExMgr.cpp:701,=20
dev=3D<mlc:usb:officejet_5500_series>, pid=3D21110, e=3D2         =
ptal-mlcd=20
successfully initialized. Jul  7 21:17:30 matze ptal-printd:=20
ptal-printd(mlc:usb:officejet_5500_series) successfully initialized=20
using /var/run/ptal-printd/mlc_usb_officejet_5500_series*.

Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=3Dvmnet8 OUT=3D=20=

MAC=3D SRC=3D192.168.212.1 DST=3D192.168.212.255 LEN=3D189 TOS=3D0x00 =
PREC=3D0x00=20
TTL=3D64 ID=3D3327 DF PROTO=3DUDP SPT=3D631 DPT=3D631 LEN=3D169

Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=3Deth1 OUT=3D =
MAC=3D=20
SRC=3D192.168.22.1 DST=3D192.168.22.255 LEN=3D188 TOS=3D0x00 PREC=3D0x00 =
TTL=3D64=20
ID=3D3328 DF PROTO=3DUDP SPT=3D631 DPT=3D631 LEN=3D168

Jul  7 21:17:36 matze kernel: SuSE-FW-DROP-ANTI-SPOOFING IN=3Deth0 OUT=3D=20=

MAC=3D SRC=3D192.168.50.1 DST=3D192.168.50.255 LEN=3D181 TOS=3D0x00 =
PREC=3D0x00=20
TTL=3D64 ID=3D3329 DF PROTO=3DUDP SPT=3D631 DPT=3D631 LEN=3D161

Jul  7 21:17:37 matze ptal-mlcd: ERROR at ExMgr.cpp:2469,=20
dev=3D<mlc:usb:officejet_5500_series@/dev/usb/lp6>, pid=3D21110, e=3D19  =
    =20
   Couldn't find device: llioOpenOne failed!
----- snip -------

I have then  changed the line in the ptal configuration=20
/etc/ptal/mlc:usb:officejet_5500_series to be init.mlcd.append+=3D-device=20=

/dev/usb/lp0

Now I don't get any messages anymore, but the ptal-connect -print=20
command still returns failed.

When I switch the printer off and on again my current terminal shows=20
the following messages:

----- snip ---
ptal-mlcd: ERROR at ExMgr.cpp:2744,=20
dev=3D<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=3D30270, e=3D19
llioService: llioRead returns -1, expected=3D6!

ptal-mlcd: ERROR at ExMgr.cpp:902,=20
dev=3D<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=3D30270, e=3D19
exClose(reason=3D0x0010)
---- snip -----

It would be great if someone coult help me out here !

Thanks in advance

Matthias Schorer

Stiftsbogen 31, 81375 M=FCnchen, Germany
Tel: +49 89 5796 7923
Fax: + 49 89 5796 7925
Mobile: +49 172 853 5093