Re: [hpoj-devel] HPOJ can't find OfficeJet V40

[Laurence O. <lau...@or...>]

On Fri, 2004-04-30 at 17:31, Der Benutzer wrote:
> Hello,
> 
> I recently purchased a OfficeJet V40 (USB). The device is correctly listed 
> in /proc/bus/usb/devices, but when I run "ptal-init setup", it finds no 
> device. The probe for /dev/usb/lp0 takes about 15 seconds; the ones after 
> that takes less than one second each. None of the probes is successful.
> The computer that the OfficeJet is connected to is running Debian Woody and 
> the 2.6.5 kernel. The version of HPOJ is 0.8-11. Here are the first few 
> lines from syslog after invoking ptal-init:
> 
> Apr 30 18:24:24 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, 
> pid=27048, errno=111         ptal-mlcd successfully initialized.
> Apr 30 18:24:39 playa ptal-mlcd: ERROR at 
> transport/ExMlcCommandChannel.cpp:243, dev=<usb:probe>, pid=27048, errno=11  
>         Reply timer popped on port=0, count=1!
> Apr 30 18:24:39 playa ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:probe>, 
> pid=27048, errno=25         exClose(reason=0x3002)
> Apr 30 18:24:40 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, 
> pid=27072, errno=111         ptal-mlcd successfully initialized.
> Apr 30 18:24:41 playa ptal-mlcd: ERROR at ExMgr.cpp:2332, dev=<usb:probe>, 
> pid=27072, errno=19         Couldn't find device!
> Apr 30 18:24:41 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, 
> pid=27080, errno=111         ptal-mlcd successfully initialized.
> 
> Should I try:
> - compiling the latest version of HPOJ (0.91) since I have 0.8 installed, or
> - going back from kernel 2.6.5 to 2.6.2 since the latest kernels seem to 
> have USB issues, or
> - is there anything else I may have overlooked?
> Thanks,
> 
> Peter
> 
Hi Peter

First I would try updating the HPOJ to 0.91, that seems to work ok on
FC1.

Laurence