[hpoj-devel] Problems with PSC 2210 mostly solved by upgrading hpoj to 0.91

[Michal K. <M.K...@el...>]

hello,
About two weeks ago I wrote to this mailing list about problems I had with
my PSC 2210 when scanning while hpoj 0.90 was used. The problems included
the whole scan area always being Letter sized (while the scanner is also
supposed to be able to scan an A4 page) and the area actually being
scanned being not exactly the same as the area selected for scanning in
the scan preview window.
I was suggested to upgrade hpoj to 0.91, but was unable to check if it
solved these problems until now.
So now I installed and compiled hpoj 0.91 and indeed the scanning area is
now A4. Just out of curiousity, what would I need to do to set the scan
area back to Letter size if I ever needed to ? (I hope it's possible
without having to modify the sources and recompile)
It also seems that problems with the area actually scanned being different
than the area selected in the scan preview are mostly fixed. At this
moment the actual scan area seems to be shifted about 0.5 cm down relative
to what was selected in the scan preview (at least with kooka), but this
is already much better than what I had with hpoj 0.90.
Thank you for all your help.
Michal Kosmulski