[hpoj-devel] (no subject)

[Valinotto A. <And...@TI...>]

Hello.

I've bought a multifunction HP3020 and I'd like to use it under Linux. =
I'm using Mandrake 8.1, so I installed HPOJ 0.90.
Printing works fine, but I can't scan. When issueing "ptal-init setup" =
the unit is recognized correctly, but any sane-based utility does not =
work.

Is there anything I could do to improve the situation ? Will 3020 be =
supported in the future ?

Thanks.



=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
CONFIDENTIALITY NOTICE
This message and its attachments are addressed solely to the persons
above and may contain confidential information. If you have received
the message in error, be informed that any use of the content hereof
is prohibited. Please return it immediately to the sender and delete
the message. Should you have any questions, please contact us by
replying to Mai...@ti.... Thank you
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D