hi
after updating my kernel, i've been trying to print some stuff, but to
no avail. sometimes, when i try to print a test page, it will print
about a quarter of it before just stopping and doing nothing more ...
i've tried adding and readding the printer and going through ptal-init
and stuff. i'm using fedora core 4 with the kernel 2.6.13.rc6 and
realtime-preempt patches (it has worked on a similar setup).
here is some messages i got:
Aug 17 07:27:30 localhost ptal-mlcd: ERROR at
transport/ExMlcCommandChannel.cpp:253, dev=<mlc:par:OFFICEJET@/dev/lp0>,
pid=1772, e=11, t=1124227650 Command reply timeout on port=0,
count=1, lastRequest=0x00!
Aug 17 07:27:30 localhost ptal-mlcd: ERROR at ExMgr.cpp:871,
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=5, t=1124227650
exClose(reason=0x3002)
Aug 17 07:27:36 localhost ptal-mlcd: ERROR at
transport/ExMlcCommandChannel.cpp:253, dev=<mlc:par:OFFICEJET@/dev/lp0>,
pid=1772, e=5, t=1124227656 Command reply timeout on port=0,
count=1, lastRequest=0x00!
Aug 17 07:27:36 localhost ptal-mlcd: ERROR at ExMgr.cpp:871,
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=5, t=1124227656
exClose(reason=0x3002)
Aug 17 07:27:48 localhost ptal-mlcd: SYSLOG at
/usr/src/build/533581-i386/BUILD/hpoj-0.91/mlcd/ExMgr.h:646,
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=11, t=1124227668
ptal-mlcd successfully activated, mode=MLC.
Aug 17 07:27:48 localhost ptal-mlcd: ERROR at
transport/ExMlcCommandChannel.cpp:1782,
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=11, t=1124227668
handleError(port=0,MLC): error=0x06.
Aug 17 07:27:48 localhost ptal-mlcd: ERROR at ExMgr.cpp:871,
dev=<mlc:par:OFFICEJET@/dev/lp0>, pid=1772, e=5, t=1124227668
exClose(reason=0x3006)
any help greatly appreciated (please CC me on any replies).
shayne
|
