Hello.
I have successfully built the hpoj-0.6 modules and compiled sane
with the 1.0.3 patch applied. RH 6.2 with 2.2.17 kernel on a single
intel processor, via apollo chipset, board.
The insmod list executes OK - see section of /var/log/messages
below. A "hpo devid" responds OK with the 1150C info. The sane
dll.conf and hp.conf files are setup as detailed.
When I try an "xscanimage" there is a short period of activity
followed by nothing but a flashing light on the 1150C with the
message "Scanning". I haven't worked out how to unjam things
without rebooting which is rather embarrassing for a Linux user!
from /var/log/messages
Nov 25 15:40:59 hal kernel: parport0: PC-style at 0x378 (0x778)
[SPP,EPP,ECP,ECPEPP,ECPPS2]
Nov 25 15:40:59 hal kernel: parport0: detected irq 7; use procfs to
enable interrupt-driven operation.
Nov 25 15:41:07 hal kernel: parport0: Printer, HEWLETT-
PACKARD OFFICEJET PRO 1150C
Nov 25 15:41:34 hal kernel: IEEE1284.4 protocol layer for Linux
installed
Nov 25 15:41:42 hal kernel: ieee12844pp: IEEE1284.4 device found
on parport0:
Nov 25 15:41:42 hal kernel: HEWLETT-PACKARD OFFICEJET
PRO 1150C;
Nov 25 15:41:42 hal kernel: device registered to IEEE1284.4
protocol layer as link mlcpp0
Nov 25 15:44:37 hal kernel:
PAR_WAIT_SET_CLEAR(l=c882c160,set=0x0000,clear=0x0040):
timed out waiting for event=9!
Nov 25 15:44:37 hal kernel: mlcpp0: mlcpp_intr ERROR -110
Nov 25 15:44:37 hal kernel: state=5 event=9 reset=7 recv=3 rcv=0
send=2
Nov 25 15:44:37 hal kernel: mlc: mlcpp0: link error -110
Nov 25 15:50:52 hal kernel:
PAR_WAIT_SET_CLEAR(l=c882c160,set=0x0098,clear=0x0040):
timed out waiting for event=23!
Nov 25 15:50:52 hal kernel: mlcpp0: mlcpp_intr ERROR -110
Nov 25 15:50:52 hal kernel: state=7 event=23 reset=7 recv=3
rcv=0 send=2
Nov 25 15:50:52 hal kernel: mlc: mlcpp0: link error -110
Can anyone help me sort this out please?
I have also tried changing the ieee12844.c to the version available
from the CVS tree but it generated a stack of errors during the
compile - I have no idea how to use the CVS resource properly -
can someone point me to a tutorial or advise me on its use?
Thanks,
Graham
.
Graham Vincent, Engineering Director, GPV Enterprises Ltd.
PO Box 5001, New Plymouth, New Zealand. Phone 025-814-655
email gr...@gp... URL http://www.gpv.co.nz
|
