Menu
▾
▴
hpoj-devel
|
From: Hal V. <ha...@th...> - 2004-08-11 15:46:58
|
I bought a HP 5510 last night and was up most of the night trying to get it to
work. (I need to have a printer working ASAP and am close to returning this
and getting a Brother 1440 laserprinter because it just won't work.)
I am using Libranet, so when I hooked up the printer, I used apt-get to
install hpoj and hpijs. (I haven't seen it specifically stated, but I assume
I need both of these, hpoj to scan and hpijs to print -- is that right?). I
am using a 2.4.21 kernel. The hpijs version is 1.5.
Originally when I installed hpoj (again, with apt-get), ptal-init asked me all
the questions, and within a few minutes I was able to use the scanner.
Considering the last time I had tried a scanner on Linux was over 3 years
ago, and it was damn near impossible to get it to work, I was excited.
Then I tried to install the printer. I used the KDE control panel and pulled
up the printer screen to install the printer in CUPS (if you haven't used it,
it has a few more features than the web control panel for CUPS). The first
time I did this, I admit I didn't read the instructions. I tried to install
it as the 1st USB printer, and got messages that usb:/dev/usb/lp0 did not
exist. I deleted the printer from CUPS, restarted CUPS, and re-installed
(this time, in the printer list, CUPS specified ptal:mlc:usb:hp5510 --I
changed the name to hp5510 for brevity). It installed and I tried to print a
test page. I got the dialog that said CUPS sent the test page successfully,
I pressed Okay to continue, configured the printer, and waited. No test
page.
I have uninstalled and reinstalled this a number of times. I am getting the
status display (on the web control panel for CUPS) Printer State: stopped,
accepting jobs.
I've tried ptal-print and it cannot connect to the printer. I tried
ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP and I get a dump
(included at the end of this, in case it helps). I tried ptal-connect
mlc:usb:hp5510 -service echo and I cannot connect.
It seems I can scan (some programs seem to have trouble, but the SANE gui
frontend allowed me to scan an image in perfectly). I can use scanimage
--list-devices and it shows up. If I scanimage --test, I get a successful
report. I don't know if this printer has an echo service, so I don't know if
ptal-connect mlc:usb:hp5510 -service echo is a sign of the problem or not.
I really want to get this working, since it would solve my
scanner/fax/printer/copier needs with one shot and because I like HP products
(they usually have good Linux support and are reliable), but I have to be
practical. I cannot waste a lot of time on this. I have to have a printer
working today, and I have to get back to my other work, so any help is
GREATLY appreciated.
Thanks!
Hal
Output from ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP:
ptal-connect: connecting to device "mlc:usb:hp5510"... successful.
ExMgr:
pid=13637
gDebugFlag=0
pBufferPool: available#=2, size=4102, requested#=230, allocated#=3
noFork=0
stayActivated=0
noDrain=0
forceMlcDot4=0
noDot4=0
noPmlMultiplexing=0
sleepBeforeOpen=0
initialized=1
fd=5: read=1, write=0
fd=8: read=1, write=0
fd=9: read=1, write=0
fdCount=10
exContext=2
exState=2
exActivateCount=1
exCloseCount=0
exCloseReason=0x0000
exReactivateFlag=0
tryDot4=1
tryMlc=1
transportMode=2=1284.4
miser=0
argcOriginal=22
argvOriginal: "mlc:usb:hp5510" "-devidmatch" "MDL:officejet 5500 series;"
"-devidmatch" "SN:MY44CF101396;" "-device" "/dev/usb/lp0" "/dev/usb/lp1"
"/dev/usb/lp10" "/dev/usb/lp11" "/dev/usb/lp12" "/dev/usb/lp13"
"/dev/usb/lp14" "/dev/usb/lp15" "/dev/usb/lp2" "/dev/usb/lp3" "/dev/usb/lp4"
"/dev/usb/lp5" "/dev/usb/lp6" "/dev/usb/lp7" "/dev/usb/lp8" "/dev/usb/lp9"
argc=0
fdNull=4
pFreeMsgPool: depth=2
pPendingMsgQueue: depth=0
pActiveTimerQueue: depth=0
pPeriodicTimerQueue: depth=1
select timeout: sec=0, usec=500000, infinite=0
consoleAllowRemote=0
consoleOldStdin=6
consoleOldStdout=7
consoleIsRemote=0
socketSuffix=<usb:hp5510>
socketAliasSuffix=<>
socketName=</var/run/ptal-mlcd/usb:hp5510>
socketAliasName=<>
socketFd=5
pmlTransportSession=8
pmlCurrentSession=-1
pmlLastSession=24
llioPossibleName[0]=</dev/usb/lp0>
llioPossibleName[1]=</dev/usb/lp1>
llioPossibleName[2]=</dev/usb/lp10>
llioPossibleName[3]=</dev/usb/lp11>
llioPossibleName[4]=</dev/usb/lp12>
llioPossibleName[5]=</dev/usb/lp13>
llioPossibleName[6]=</dev/usb/lp14>
llioPossibleName[7]=</dev/usb/lp15>
llioPossibleName[8]=</dev/usb/lp2>
llioPossibleName[9]=</dev/usb/lp3>
llioPossibleName[10]=</dev/usb/lp4>
llioPossibleName[11]=</dev/usb/lp5>
llioPossibleName[12]=</dev/usb/lp6>
llioPossibleName[13]=</dev/usb/lp7>
llioPossibleName[14]=</dev/usb/lp8>
llioPossibleName[15]=</dev/usb/lp9>
llioPossibleNameCount=16
llioName=</dev/usb/lp0>
llioOverrideDeviceID=<>
llioMatchDeviceID[0]=<MDL:officejet 5500 series;>
llioMatchDeviceID[1]=<SN:MY44CF101396;>
llioMatchDeviceIDCount=2
llioFd=9
llioDummyFd=-1
llioPollState=2
llioLastHitTime=1092238335
llioForwardBdrQueue: depth=0
llioDeviceID=<MFG:hp;MDL:officejet 5500
series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0380008000020020002c1480062c2500062;Z:007;>
llioSavedDeviceID=<MFG:hp;MDL:officejet 5500
series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0380008000020020002c1480062c2500062;Z:007;>
llioBusAddress=2
llioDeviceAddress=7
llioVendorID=0x03F0
llioProductID=0x3A11
llioCurrentProtocol=2
llioSupportedProtocols=0x04
Transport:
this=0x08069300
port=0
pMgr=0x08068628
pPhysicalPort=0x08068628
forwardTransactionCounter: current=128, initial=128, low=126, high=128,
max=128
channelCount=17
channelArray=0x080694F0
channelArray[0]=0x08069538
channelArray[1]=0x08069830
channelArray[2]=0x08069A30
channelArray[3]=0x08069C30
channelArray[4]=0x08069E30
channelArray[5]=0x0806A030
channelArray[6]=0x0806A230
channelArray[7]=0x0806A430
channelArray[8]=0x0806A630
channelArray[9]=0x0806A830
channelArray[10]=0x0806AA30
channelArray[11]=0x0806AC30
channelArray[12]=0x0806AE30
channelArray[13]=0x0806B030
channelArray[14]=0x0806B230
channelArray[15]=0x0806B430
channelArray[16]=0x0806B630
overheadBufferCount=0
pNextTransport=0x00000000
pForwardDataTimer=0x080693C8 (count=0)
pForwardDataTimeoutMsg=0x08069398
reverseDataBufferCount=180
reverseDataBufferSize=4102
maxForwardBdrsPerTransaction=4
nextChannelToAllocate=17
nextBlockedChannel=-1
lookupQueue: depth=0, peek=0x00000000
----------------
pForwardHeaderPool=0x08069408
mlcChannelArray=0x080694F0
pCommandChannel=0x08069538
grcState=0
reverseDataStopped=0
tryDot4=1
tryPreDot4=0
tryMlc=1
requestedRevision=0x20
revision=0x20
maxRemoteSockets=32
Command channel:
this=0x08069538
port=0
channel=0
localSocket=0
pTransport=0x08069300
pMgr=0x08068628
pPhysicalPort=0x08068628
openingAnySetFlags=0x0010
closingAnySetFlags=0x0124
flags=0x0003
countOpen=0
countOpenFailure=0
pService=0x00000000
scd=0x00000000
forwardDataPriority=0
minBuffersRequired=0
benefitOfMoreBuffers=0
reverseDataBufferSize=4102
bufferCount=3
remoteSocket=0
maxForwardDatalen=58
maxReverseDatalen=58
countForwardData=38
countReverseData=38
countReverseBuffers=38
countReverseBufferReturns=38
lastReverseBuffer=0x00000000
currentForwardBuffer=0x00000000
currentGrabbedCredit=-1
currentGrabbedTransaction=-1
----------------
pMlcTransport=0x08069300
pCommandChannel=0x08069538
disableCreditCommands=1
pForwardCreditRequestTimer=0x080696D0
pForwardCreditRequestMsg=0x080696A0
pReverseCreditHeartbeatTimer=0x08069738
pReverseCreditHeartbeatMsg=0x08069708
musherFirstCreditRequestDelay=2
musherNextCreditRequestDelay=5
gusherFirstCreditRequestDelay=5
gusherNextCreditRequestDelay=10
miserFirstCreditRequestDelay=0
miserNextCreditRequestDelay=2
gusherPiggybackCreditCount=1
gusherCreditCount=2
miserCreditRequestCount=2
workaroundReverseCreditLoss=0
maxForwardPacketSize=64
maxReversePacketSize=64
forwardCreditRequest=16
forwardMaxOutstandingCredit=1
forwardCredit: current=1, initial=1, low=0, high=2, max=65535
lastCreditRequestGotUsNowhere=0
reverseMaxOutstandingCredit=1
reverseBuffersPerPacket=1
uncreditedBuffers=0
reverseCreditToGrant=2
reverseCredit: current=1, initial=1, low=0, high=2, max=65535
countSendPiggybackCredit=38
countHandlePiggybackCredit=38
countSendCredit=0
countHandleCredit=0
countHandleCreditAfterCreditRequest=0
countSendCreditRequest=0
countHandleCreditRequest=0
countSendEmptyCreditRequestReply=0
countHandleEmptyCreditRequestReply=0
isGusher=1
----------------
pForwardCommandPool=0x08069770
pForwardNonconsumingQueue=0x08069790
pForwardReplyQueue=0x080697A0
pForwardRequestQueue=0x080697B0
forwardRequestCredit: current=1, initial=1, low=0, high=1, max=65535
pCommandReplyTimer=0x080697F0 (count=0)
pCommandReplyTimeoutMsg=0x080697C0
allowErrorPackets=1
lastPsid=-1
lastSsid=-1
Session 0: type=command
state=1
fd=8
scdlink=-1
pLookup=0x08068DE8
outstandingForwardBdrCount=1
pReverseBdrQueue: depth=0
tcd=0x00000000
pCommandBdr=0x0806DA38
pmlTrapsRegistered=0
bitbucketSocket=0
Session 8: type=transport
state=6
fd=10
scdlink=-1
pLookup=0x080690E8
outstandingForwardBdrCount=0
pReverseBdrQueue: depth=0
tcd=0x08069830
pCommandBdr=0x00000000
pmlTrapsRegistered=0
bitbucketSocket=0
Transport channel for session 8:
this=0x08069830
port=0
channel=1
localSocket=128
pTransport=0x08069300
pMgr=0x08068628
pPhysicalPort=0x08068628
openingAnySetFlags=0x0010
closingAnySetFlags=0x0124
flags=0x0003
countOpen=1
countOpenFailure=0
pService=0x08068628
scd=0x00000008
forwardDataPriority=0
minBuffersRequired=10
benefitOfMoreBuffers=1
reverseDataBufferSize=4102
bufferCount=12
remoteSocket=1
maxForwardDatalen=2046
maxReverseDatalen=2046
countForwardData=2
countReverseData=2
countReverseBuffers=2
countReverseBufferReturns=2
lastReverseBuffer=0x0806DA38
currentForwardBuffer=0x00000000
currentGrabbedCredit=-1
currentGrabbedTransaction=-1
----------------
pMlcTransport=0x08069300
pCommandChannel=0x08069538
disableCreditCommands=0
pForwardCreditRequestTimer=0x08069990
pForwardCreditRequestMsg=0x08069960
pReverseCreditHeartbeatTimer=0x080699F8
pReverseCreditHeartbeatMsg=0x080699C8
musherFirstCreditRequestDelay=2
musherNextCreditRequestDelay=5
gusherFirstCreditRequestDelay=5
gusherNextCreditRequestDelay=10
miserFirstCreditRequestDelay=0
miserNextCreditRequestDelay=2
gusherPiggybackCreditCount=1
gusherCreditCount=2
miserCreditRequestCount=2
workaroundReverseCreditLoss=0
maxForwardPacketSize=2052
maxReversePacketSize=2052
forwardCreditRequest=16
forwardMaxOutstandingCredit=65535
forwardCredit: current=1, initial=0, low=0, high=1, max=65535
lastCreditRequestGotUsNowhere=0
reverseMaxOutstandingCredit=65535
reverseBuffersPerPacket=1
uncreditedBuffers=0
reverseCreditToGrant=0
reverseCredit: current=12, initial=12, low=11, high=12, max=65535
countSendPiggybackCredit=0
countHandlePiggybackCredit=0
countSendCredit=3
countHandleCredit=3
countHandleCreditAfterCreditRequest=0
countSendCreditRequest=0
countHandleCreditRequest=0
countSendEmptyCreditRequestReply=0
countHandleEmptyCreditRequestReply=0
isGusher=1
|
|
From: Hal V. <ha...@th...> - 2004-08-11 21:14:09
|
On Wednesday 11 August 2004 11:47 am, Hal Vaughan wrote: > I bought a HP 5510 last night and was up most of the night trying to get it > to work. (I need to have a printer working ASAP and am close to returning > this and getting a Brother 1440 laserprinter because it just won't work.) > > I am using Libranet, so when I hooked up the printer, I used apt-get to > install hpoj and hpijs. (I haven't seen it specifically stated, but I > assume I need both of these, hpoj to scan and hpijs to print -- is that > right?). I am using a 2.4.21 kernel. The hpijs version is 1.5. I saw a reference to some problems in the USB drivers before the 2.4.7 kernel. Will this kernel work, or do I need a later one? Hal > Originally when I installed hpoj (again, with apt-get), ptal-init asked me > all the questions, and within a few minutes I was able to use the scanner. > Considering the last time I had tried a scanner on Linux was over 3 years > ago, and it was damn near impossible to get it to work, I was excited. > > Then I tried to install the printer. I used the KDE control panel and > pulled up the printer screen to install the printer in CUPS (if you haven't > used it, it has a few more features than the web control panel for CUPS). > The first time I did this, I admit I didn't read the instructions. I tried > to install it as the 1st USB printer, and got messages that > usb:/dev/usb/lp0 did not exist. I deleted the printer from CUPS, restarted > CUPS, and re-installed (this time, in the printer list, CUPS specified > ptal:mlc:usb:hp5510 --I changed the name to hp5510 for brevity). It > installed and I tried to print a test page. I got the dialog that said > CUPS sent the test page successfully, I pressed Okay to continue, > configured the printer, and waited. No test page. > > I have uninstalled and reinstalled this a number of times. I am getting > the status display (on the web control panel for CUPS) Printer State: > stopped, accepting jobs. > > I've tried ptal-print and it cannot connect to the printer. I tried > ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP and I get a dump > (included at the end of this, in case it helps). I tried ptal-connect > mlc:usb:hp5510 -service echo and I cannot connect. > > It seems I can scan (some programs seem to have trouble, but the SANE gui > frontend allowed me to scan an image in perfectly). I can use scanimage > --list-devices and it shows up. If I scanimage --test, I get a successful > report. I don't know if this printer has an echo service, so I don't know > if ptal-connect mlc:usb:hp5510 -service echo is a sign of the problem or > not. > > I really want to get this working, since it would solve my > scanner/fax/printer/copier needs with one shot and because I like HP > products (they usually have good Linux support and are reliable), but I > have to be practical. I cannot waste a lot of time on this. I have to > have a printer working today, and I have to get back to my other work, so > any help is GREATLY appreciated. > > Thanks! > > Hal > > Output from ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP: > > ptal-connect: connecting to device "mlc:usb:hp5510"... successful. > > ExMgr: > pid=13637 > gDebugFlag=0 > pBufferPool: available#=2, size=4102, requested#=230, allocated#=3 > noFork=0 > stayActivated=0 > noDrain=0 > forceMlcDot4=0 > noDot4=0 > noPmlMultiplexing=0 > sleepBeforeOpen=0 > initialized=1 > fd=5: read=1, write=0 > fd=8: read=1, write=0 > fd=9: read=1, write=0 > fdCount=10 > exContext=2 > exState=2 > exActivateCount=1 > exCloseCount=0 > exCloseReason=0x0000 > exReactivateFlag=0 > tryDot4=1 > tryMlc=1 > transportMode=2=1284.4 > miser=0 > argcOriginal=22 > argvOriginal: "mlc:usb:hp5510" "-devidmatch" "MDL:officejet 5500 series;" > "-devidmatch" "SN:MY44CF101396;" "-device" "/dev/usb/lp0" "/dev/usb/lp1" > "/dev/usb/lp10" "/dev/usb/lp11" "/dev/usb/lp12" "/dev/usb/lp13" > "/dev/usb/lp14" "/dev/usb/lp15" "/dev/usb/lp2" "/dev/usb/lp3" > "/dev/usb/lp4" "/dev/usb/lp5" "/dev/usb/lp6" "/dev/usb/lp7" "/dev/usb/lp8" > "/dev/usb/lp9" argc=0 > fdNull=4 > pFreeMsgPool: depth=2 > pPendingMsgQueue: depth=0 > pActiveTimerQueue: depth=0 > pPeriodicTimerQueue: depth=1 > select timeout: sec=0, usec=500000, infinite=0 > consoleAllowRemote=0 > consoleOldStdin=6 > consoleOldStdout=7 > consoleIsRemote=0 > socketSuffix=<usb:hp5510> > socketAliasSuffix=<> > socketName=</var/run/ptal-mlcd/usb:hp5510> > socketAliasName=<> > socketFd=5 > pmlTransportSession=8 > pmlCurrentSession=-1 > pmlLastSession=24 > llioPossibleName[0]=</dev/usb/lp0> > llioPossibleName[1]=</dev/usb/lp1> > llioPossibleName[2]=</dev/usb/lp10> > llioPossibleName[3]=</dev/usb/lp11> > llioPossibleName[4]=</dev/usb/lp12> > llioPossibleName[5]=</dev/usb/lp13> > llioPossibleName[6]=</dev/usb/lp14> > llioPossibleName[7]=</dev/usb/lp15> > llioPossibleName[8]=</dev/usb/lp2> > llioPossibleName[9]=</dev/usb/lp3> > llioPossibleName[10]=</dev/usb/lp4> > llioPossibleName[11]=</dev/usb/lp5> > llioPossibleName[12]=</dev/usb/lp6> > llioPossibleName[13]=</dev/usb/lp7> > llioPossibleName[14]=</dev/usb/lp8> > llioPossibleName[15]=</dev/usb/lp9> > llioPossibleNameCount=16 > llioName=</dev/usb/lp0> > llioOverrideDeviceID=<> > llioMatchDeviceID[0]=<MDL:officejet 5500 series;> > llioMatchDeviceID[1]=<SN:MY44CF101396;> > llioMatchDeviceIDCount=2 > llioFd=9 > llioDummyFd=-1 > llioPollState=2 > llioLastHitTime=1092238335 > llioForwardBdrQueue: depth=0 > llioDeviceID=<MFG:hp;MDL:officejet 5500 > series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0 >380008000020020002c1480062c2500062;Z:007;> > llioSavedDeviceID=<MFG:hp;MDL:officejet 5500 > series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0 >380008000020020002c1480062c2500062;Z:007;> llioBusAddress=2 > llioDeviceAddress=7 > llioVendorID=0x03F0 > llioProductID=0x3A11 > llioCurrentProtocol=2 > llioSupportedProtocols=0x04 > > Transport: > this=0x08069300 > port=0 > pMgr=0x08068628 > pPhysicalPort=0x08068628 > forwardTransactionCounter: current=128, initial=128, low=126, high=128, > max=128 > channelCount=17 > channelArray=0x080694F0 > channelArray[0]=0x08069538 > channelArray[1]=0x08069830 > channelArray[2]=0x08069A30 > channelArray[3]=0x08069C30 > channelArray[4]=0x08069E30 > channelArray[5]=0x0806A030 > channelArray[6]=0x0806A230 > channelArray[7]=0x0806A430 > channelArray[8]=0x0806A630 > channelArray[9]=0x0806A830 > channelArray[10]=0x0806AA30 > channelArray[11]=0x0806AC30 > channelArray[12]=0x0806AE30 > channelArray[13]=0x0806B030 > channelArray[14]=0x0806B230 > channelArray[15]=0x0806B430 > channelArray[16]=0x0806B630 > overheadBufferCount=0 > pNextTransport=0x00000000 > pForwardDataTimer=0x080693C8 (count=0) > pForwardDataTimeoutMsg=0x08069398 > reverseDataBufferCount=180 > reverseDataBufferSize=4102 > maxForwardBdrsPerTransaction=4 > nextChannelToAllocate=17 > nextBlockedChannel=-1 > lookupQueue: depth=0, peek=0x00000000 > ---------------- > pForwardHeaderPool=0x08069408 > mlcChannelArray=0x080694F0 > pCommandChannel=0x08069538 > grcState=0 > reverseDataStopped=0 > tryDot4=1 > tryPreDot4=0 > tryMlc=1 > requestedRevision=0x20 > revision=0x20 > maxRemoteSockets=32 > > Command channel: > this=0x08069538 > port=0 > channel=0 > localSocket=0 > pTransport=0x08069300 > pMgr=0x08068628 > pPhysicalPort=0x08068628 > openingAnySetFlags=0x0010 > closingAnySetFlags=0x0124 > flags=0x0003 > countOpen=0 > countOpenFailure=0 > pService=0x00000000 > scd=0x00000000 > forwardDataPriority=0 > minBuffersRequired=0 > benefitOfMoreBuffers=0 > reverseDataBufferSize=4102 > bufferCount=3 > remoteSocket=0 > maxForwardDatalen=58 > maxReverseDatalen=58 > countForwardData=38 > countReverseData=38 > countReverseBuffers=38 > countReverseBufferReturns=38 > lastReverseBuffer=0x00000000 > currentForwardBuffer=0x00000000 > currentGrabbedCredit=-1 > currentGrabbedTransaction=-1 > ---------------- > pMlcTransport=0x08069300 > pCommandChannel=0x08069538 > disableCreditCommands=1 > pForwardCreditRequestTimer=0x080696D0 > pForwardCreditRequestMsg=0x080696A0 > pReverseCreditHeartbeatTimer=0x08069738 > pReverseCreditHeartbeatMsg=0x08069708 > musherFirstCreditRequestDelay=2 > musherNextCreditRequestDelay=5 > gusherFirstCreditRequestDelay=5 > gusherNextCreditRequestDelay=10 > miserFirstCreditRequestDelay=0 > miserNextCreditRequestDelay=2 > gusherPiggybackCreditCount=1 > gusherCreditCount=2 > miserCreditRequestCount=2 > workaroundReverseCreditLoss=0 > maxForwardPacketSize=64 > maxReversePacketSize=64 > forwardCreditRequest=16 > forwardMaxOutstandingCredit=1 > forwardCredit: current=1, initial=1, low=0, high=2, max=65535 > lastCreditRequestGotUsNowhere=0 > reverseMaxOutstandingCredit=1 > reverseBuffersPerPacket=1 > uncreditedBuffers=0 > reverseCreditToGrant=2 > reverseCredit: current=1, initial=1, low=0, high=2, max=65535 > countSendPiggybackCredit=38 > countHandlePiggybackCredit=38 > countSendCredit=0 > countHandleCredit=0 > countHandleCreditAfterCreditRequest=0 > countSendCreditRequest=0 > countHandleCreditRequest=0 > countSendEmptyCreditRequestReply=0 > countHandleEmptyCreditRequestReply=0 > isGusher=1 > ---------------- > pForwardCommandPool=0x08069770 > pForwardNonconsumingQueue=0x08069790 > pForwardReplyQueue=0x080697A0 > pForwardRequestQueue=0x080697B0 > forwardRequestCredit: current=1, initial=1, low=0, high=1, max=65535 > pCommandReplyTimer=0x080697F0 (count=0) > pCommandReplyTimeoutMsg=0x080697C0 > allowErrorPackets=1 > lastPsid=-1 > lastSsid=-1 > > Session 0: type=command > state=1 > fd=8 > scdlink=-1 > pLookup=0x08068DE8 > outstandingForwardBdrCount=1 > pReverseBdrQueue: depth=0 > tcd=0x00000000 > pCommandBdr=0x0806DA38 > pmlTrapsRegistered=0 > bitbucketSocket=0 > > Session 8: type=transport > state=6 > fd=10 > scdlink=-1 > pLookup=0x080690E8 > outstandingForwardBdrCount=0 > pReverseBdrQueue: depth=0 > tcd=0x08069830 > pCommandBdr=0x00000000 > pmlTrapsRegistered=0 > bitbucketSocket=0 > > Transport channel for session 8: > this=0x08069830 > port=0 > channel=1 > localSocket=128 > pTransport=0x08069300 > pMgr=0x08068628 > pPhysicalPort=0x08068628 > openingAnySetFlags=0x0010 > closingAnySetFlags=0x0124 > flags=0x0003 > countOpen=1 > countOpenFailure=0 > pService=0x08068628 > scd=0x00000008 > forwardDataPriority=0 > minBuffersRequired=10 > benefitOfMoreBuffers=1 > reverseDataBufferSize=4102 > bufferCount=12 > remoteSocket=1 > maxForwardDatalen=2046 > maxReverseDatalen=2046 > countForwardData=2 > countReverseData=2 > countReverseBuffers=2 > countReverseBufferReturns=2 > lastReverseBuffer=0x0806DA38 > currentForwardBuffer=0x00000000 > currentGrabbedCredit=-1 > currentGrabbedTransaction=-1 > ---------------- > pMlcTransport=0x08069300 > pCommandChannel=0x08069538 > disableCreditCommands=0 > pForwardCreditRequestTimer=0x08069990 > pForwardCreditRequestMsg=0x08069960 > pReverseCreditHeartbeatTimer=0x080699F8 > pReverseCreditHeartbeatMsg=0x080699C8 > musherFirstCreditRequestDelay=2 > musherNextCreditRequestDelay=5 > gusherFirstCreditRequestDelay=5 > gusherNextCreditRequestDelay=10 > miserFirstCreditRequestDelay=0 > miserNextCreditRequestDelay=2 > gusherPiggybackCreditCount=1 > gusherCreditCount=2 > miserCreditRequestCount=2 > workaroundReverseCreditLoss=0 > maxForwardPacketSize=2052 > maxReversePacketSize=2052 > forwardCreditRequest=16 > forwardMaxOutstandingCredit=65535 > forwardCredit: current=1, initial=0, low=0, high=1, max=65535 > lastCreditRequestGotUsNowhere=0 > reverseMaxOutstandingCredit=65535 > reverseBuffersPerPacket=1 > uncreditedBuffers=0 > reverseCreditToGrant=0 > reverseCredit: current=12, initial=12, low=11, high=12, max=65535 > countSendPiggybackCredit=0 > countHandlePiggybackCredit=0 > countSendCredit=3 > countHandleCredit=3 > countHandleCreditAfterCreditRequest=0 > countSendCreditRequest=0 > countHandleCreditRequest=0 > countSendEmptyCreditRequestReply=0 > countHandleEmptyCreditRequestReply=0 > isGusher=1 > > > ------------------------------------------------------- > SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media > 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 > Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. > http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 > > _______________________________________________ > hpoj-devel mailing list > hpo...@li... > https://lists.sourceforge.net/lists/listinfo/hpoj-devel |
|
From: Hal V. <ha...@th...> - 2004-08-12 00:22:28
|
On Wednesday 11 August 2004 11:47 am, Hal Vaughan wrote: > I bought a HP 5510 last night and was up most of the night trying to get it > to work. (I need to have a printer working ASAP and am close to returning > this and getting a Brother 1440 laserprinter because it just won't work.) > > I am using Libranet, so when I hooked up the printer, I used apt-get to > install hpoj and hpijs. (I haven't seen it specifically stated, but I > assume I need both of these, hpoj to scan and hpijs to print -- is that > right?). I am using a 2.4.21 kernel. The hpijs version is 1.5. > > Originally when I installed hpoj (again, with apt-get), ptal-init asked me > all the questions, and within a few minutes I was able to use the scanner. > Considering the last time I had tried a scanner on Linux was over 3 years > ago, and it was damn near impossible to get it to work, I was excited. > > Then I tried to install the printer. I used the KDE control panel and > pulled up the printer screen to install the printer in CUPS (if you haven't > used it, it has a few more features than the web control panel for CUPS). > The first time I did this, I admit I didn't read the instructions. I tried > to install it as the 1st USB printer, and got messages that > usb:/dev/usb/lp0 did not exist. I deleted the printer from CUPS, restarted > CUPS, and re-installed (this time, in the printer list, CUPS specified > ptal:mlc:usb:hp5510 --I changed the name to hp5510 for brevity). It > installed and I tried to print a test page. I got the dialog that said > CUPS sent the test page successfully, I pressed Okay to continue, > configured the printer, and waited. No test page. > > I have uninstalled and reinstalled this a number of times. I am getting > the status display (on the web control panel for CUPS) Printer State: > stopped, accepting jobs. > > I've tried ptal-print and it cannot connect to the printer. I tried > ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP and I get a dump > (included at the end of this, in case it helps). I tried ptal-connect > mlc:usb:hp5510 -service echo and I cannot connect. > > It seems I can scan (some programs seem to have trouble, but the SANE gui > frontend allowed me to scan an image in perfectly). I can use scanimage > --list-devices and it shows up. If I scanimage --test, I get a successful > report. I don't know if this printer has an echo service, so I don't know > if ptal-connect mlc:usb:hp5510 -service echo is a sign of the problem or > not. > > I really want to get this working, since it would solve my > scanner/fax/printer/copier needs with one shot and because I like HP > products (they usually have good Linux support and are reliable), but I > have to be practical. I cannot waste a lot of time on this. I have to > have a printer working today, and I have to get back to my other work, so > any help is GREATLY appreciated. > > Thanks! > > Hal I can't believe how much time I spent on this. I finally found out that the stable version of hpoj (the driver for HP officejets) is .8x. In short, when removed both hpijs (both hpoj and hpijs are needed for an HP all-in-one), then re-installed with apt-get install hpoj=9.??? (whatever -- the latest shown w/ apt-cahce showpkg) and did the same with hpijs, it installed and worked perfectly. Now if I can only get Firefox to print to this (which is the default printer, but Firefox doesn't seem to know that!), I'll be one cappy hamper. Hal > Output from ptal-connect mlc:usb:hp5510 -service PTAL-MLCD-DUMP: > > ptal-connect: connecting to device "mlc:usb:hp5510"... successful. > > ExMgr: > pid=13637 > gDebugFlag=0 > pBufferPool: available#=2, size=4102, requested#=230, allocated#=3 > noFork=0 > stayActivated=0 > noDrain=0 > forceMlcDot4=0 > noDot4=0 > noPmlMultiplexing=0 > sleepBeforeOpen=0 > initialized=1 > fd=5: read=1, write=0 > fd=8: read=1, write=0 > fd=9: read=1, write=0 > fdCount=10 > exContext=2 > exState=2 > exActivateCount=1 > exCloseCount=0 > exCloseReason=0x0000 > exReactivateFlag=0 > tryDot4=1 > tryMlc=1 > transportMode=2=1284.4 > miser=0 > argcOriginal=22 > argvOriginal: "mlc:usb:hp5510" "-devidmatch" "MDL:officejet 5500 series;" > "-devidmatch" "SN:MY44CF101396;" "-device" "/dev/usb/lp0" "/dev/usb/lp1" > "/dev/usb/lp10" "/dev/usb/lp11" "/dev/usb/lp12" "/dev/usb/lp13" > "/dev/usb/lp14" "/dev/usb/lp15" "/dev/usb/lp2" "/dev/usb/lp3" > "/dev/usb/lp4" "/dev/usb/lp5" "/dev/usb/lp6" "/dev/usb/lp7" "/dev/usb/lp8" > "/dev/usb/lp9" argc=0 > fdNull=4 > pFreeMsgPool: depth=2 > pPendingMsgQueue: depth=0 > pActiveTimerQueue: depth=0 > pPeriodicTimerQueue: depth=1 > select timeout: sec=0, usec=500000, infinite=0 > consoleAllowRemote=0 > consoleOldStdin=6 > consoleOldStdout=7 > consoleIsRemote=0 > socketSuffix=<usb:hp5510> > socketAliasSuffix=<> > socketName=</var/run/ptal-mlcd/usb:hp5510> > socketAliasName=<> > socketFd=5 > pmlTransportSession=8 > pmlCurrentSession=-1 > pmlLastSession=24 > llioPossibleName[0]=</dev/usb/lp0> > llioPossibleName[1]=</dev/usb/lp1> > llioPossibleName[2]=</dev/usb/lp10> > llioPossibleName[3]=</dev/usb/lp11> > llioPossibleName[4]=</dev/usb/lp12> > llioPossibleName[5]=</dev/usb/lp13> > llioPossibleName[6]=</dev/usb/lp14> > llioPossibleName[7]=</dev/usb/lp15> > llioPossibleName[8]=</dev/usb/lp2> > llioPossibleName[9]=</dev/usb/lp3> > llioPossibleName[10]=</dev/usb/lp4> > llioPossibleName[11]=</dev/usb/lp5> > llioPossibleName[12]=</dev/usb/lp6> > llioPossibleName[13]=</dev/usb/lp7> > llioPossibleName[14]=</dev/usb/lp8> > llioPossibleName[15]=</dev/usb/lp9> > llioPossibleNameCount=16 > llioName=</dev/usb/lp0> > llioOverrideDeviceID=<> > llioMatchDeviceID[0]=<MDL:officejet 5500 series;> > llioMatchDeviceID[1]=<SN:MY44CF101396;> > llioMatchDeviceIDCount=2 > llioFd=9 > llioDummyFd=-1 > llioPollState=2 > llioLastHitTime=1092238335 > llioForwardBdrQueue: depth=0 > llioDeviceID=<MFG:hp;MDL:officejet 5500 > series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0 >380008000020020002c1480062c2500062;Z:007;> > llioSavedDeviceID=<MFG:hp;MDL:officejet 5500 > series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY44CF101396;S:0 >380008000020020002c1480062c2500062;Z:007;> llioBusAddress=2 > llioDeviceAddress=7 > llioVendorID=0x03F0 > llioProductID=0x3A11 > llioCurrentProtocol=2 > llioSupportedProtocols=0x04 > > Transport: > this=0x08069300 > port=0 > pMgr=0x08068628 > pPhysicalPort=0x08068628 > forwardTransactionCounter: current=128, initial=128, low=126, high=128, > max=128 > channelCount=17 > channelArray=0x080694F0 > channelArray[0]=0x08069538 > channelArray[1]=0x08069830 > channelArray[2]=0x08069A30 > channelArray[3]=0x08069C30 > channelArray[4]=0x08069E30 > channelArray[5]=0x0806A030 > channelArray[6]=0x0806A230 > channelArray[7]=0x0806A430 > channelArray[8]=0x0806A630 > channelArray[9]=0x0806A830 > channelArray[10]=0x0806AA30 > channelArray[11]=0x0806AC30 > channelArray[12]=0x0806AE30 > channelArray[13]=0x0806B030 > channelArray[14]=0x0806B230 > channelArray[15]=0x0806B430 > channelArray[16]=0x0806B630 > overheadBufferCount=0 > pNextTransport=0x00000000 > pForwardDataTimer=0x080693C8 (count=0) > pForwardDataTimeoutMsg=0x08069398 > reverseDataBufferCount=180 > reverseDataBufferSize=4102 > maxForwardBdrsPerTransaction=4 > nextChannelToAllocate=17 > nextBlockedChannel=-1 > lookupQueue: depth=0, peek=0x00000000 > ---------------- > pForwardHeaderPool=0x08069408 > mlcChannelArray=0x080694F0 > pCommandChannel=0x08069538 > grcState=0 > reverseDataStopped=0 > tryDot4=1 > tryPreDot4=0 > tryMlc=1 > requestedRevision=0x20 > revision=0x20 > maxRemoteSockets=32 > > Command channel: > this=0x08069538 > port=0 > channel=0 > localSocket=0 > pTransport=0x08069300 > pMgr=0x08068628 > pPhysicalPort=0x08068628 > openingAnySetFlags=0x0010 > closingAnySetFlags=0x0124 > flags=0x0003 > countOpen=0 > countOpenFailure=0 > pService=0x00000000 > scd=0x00000000 > forwardDataPriority=0 > minBuffersRequired=0 > benefitOfMoreBuffers=0 > reverseDataBufferSize=4102 > bufferCount=3 > remoteSocket=0 > maxForwardDatalen=58 > maxReverseDatalen=58 > countForwardData=38 > countReverseData=38 > countReverseBuffers=38 > countReverseBufferReturns=38 > lastReverseBuffer=0x00000000 > currentForwardBuffer=0x00000000 > currentGrabbedCredit=-1 > currentGrabbedTransaction=-1 > ---------------- > pMlcTransport=0x08069300 > pCommandChannel=0x08069538 > disableCreditCommands=1 > pForwardCreditRequestTimer=0x080696D0 > pForwardCreditRequestMsg=0x080696A0 > pReverseCreditHeartbeatTimer=0x08069738 > pReverseCreditHeartbeatMsg=0x08069708 > musherFirstCreditRequestDelay=2 > musherNextCreditRequestDelay=5 > gusherFirstCreditRequestDelay=5 > gusherNextCreditRequestDelay=10 > miserFirstCreditRequestDelay=0 > miserNextCreditRequestDelay=2 > gusherPiggybackCreditCount=1 > gusherCreditCount=2 > miserCreditRequestCount=2 > workaroundReverseCreditLoss=0 > maxForwardPacketSize=64 > maxReversePacketSize=64 > forwardCreditRequest=16 > forwardMaxOutstandingCredit=1 > forwardCredit: current=1, initial=1, low=0, high=2, max=65535 > lastCreditRequestGotUsNowhere=0 > reverseMaxOutstandingCredit=1 > reverseBuffersPerPacket=1 > uncreditedBuffers=0 > reverseCreditToGrant=2 > reverseCredit: current=1, initial=1, low=0, high=2, max=65535 > countSendPiggybackCredit=38 > countHandlePiggybackCredit=38 > countSendCredit=0 > countHandleCredit=0 > countHandleCreditAfterCreditRequest=0 > countSendCreditRequest=0 > countHandleCreditRequest=0 > countSendEmptyCreditRequestReply=0 > countHandleEmptyCreditRequestReply=0 > isGusher=1 > ---------------- > pForwardCommandPool=0x08069770 > pForwardNonconsumingQueue=0x08069790 > pForwardReplyQueue=0x080697A0 > pForwardRequestQueue=0x080697B0 > forwardRequestCredit: current=1, initial=1, low=0, high=1, max=65535 > pCommandReplyTimer=0x080697F0 (count=0) > pCommandReplyTimeoutMsg=0x080697C0 > allowErrorPackets=1 > lastPsid=-1 > lastSsid=-1 > > Session 0: type=command > state=1 > fd=8 > scdlink=-1 > pLookup=0x08068DE8 > outstandingForwardBdrCount=1 > pReverseBdrQueue: depth=0 > tcd=0x00000000 > pCommandBdr=0x0806DA38 > pmlTrapsRegistered=0 > bitbucketSocket=0 > > Session 8: type=transport > state=6 > fd=10 > scdlink=-1 > pLookup=0x080690E8 > outstandingForwardBdrCount=0 > pReverseBdrQueue: depth=0 > tcd=0x08069830 > pCommandBdr=0x00000000 > pmlTrapsRegistered=0 > bitbucketSocket=0 > > Transport channel for session 8: > this=0x08069830 > port=0 > channel=1 > localSocket=128 > pTransport=0x08069300 > pMgr=0x08068628 > pPhysicalPort=0x08068628 > openingAnySetFlags=0x0010 > closingAnySetFlags=0x0124 > flags=0x0003 > countOpen=1 > countOpenFailure=0 > pService=0x08068628 > scd=0x00000008 > forwardDataPriority=0 > minBuffersRequired=10 > benefitOfMoreBuffers=1 > reverseDataBufferSize=4102 > bufferCount=12 > remoteSocket=1 > maxForwardDatalen=2046 > maxReverseDatalen=2046 > countForwardData=2 > countReverseData=2 > countReverseBuffers=2 > countReverseBufferReturns=2 > lastReverseBuffer=0x0806DA38 > currentForwardBuffer=0x00000000 > currentGrabbedCredit=-1 > currentGrabbedTransaction=-1 > ---------------- > pMlcTransport=0x08069300 > pCommandChannel=0x08069538 > disableCreditCommands=0 > pForwardCreditRequestTimer=0x08069990 > pForwardCreditRequestMsg=0x08069960 > pReverseCreditHeartbeatTimer=0x080699F8 > pReverseCreditHeartbeatMsg=0x080699C8 > musherFirstCreditRequestDelay=2 > musherNextCreditRequestDelay=5 > gusherFirstCreditRequestDelay=5 > gusherNextCreditRequestDelay=10 > miserFirstCreditRequestDelay=0 > miserNextCreditRequestDelay=2 > gusherPiggybackCreditCount=1 > gusherCreditCount=2 > miserCreditRequestCount=2 > workaroundReverseCreditLoss=0 > maxForwardPacketSize=2052 > maxReversePacketSize=2052 > forwardCreditRequest=16 > forwardMaxOutstandingCredit=65535 > forwardCredit: current=1, initial=0, low=0, high=1, max=65535 > lastCreditRequestGotUsNowhere=0 > reverseMaxOutstandingCredit=65535 > reverseBuffersPerPacket=1 > uncreditedBuffers=0 > reverseCreditToGrant=0 > reverseCredit: current=12, initial=12, low=11, high=12, max=65535 > countSendPiggybackCredit=0 > countHandlePiggybackCredit=0 > countSendCredit=3 > countHandleCredit=3 > countHandleCreditAfterCreditRequest=0 > countSendCreditRequest=0 > countHandleCreditRequest=0 > countSendEmptyCreditRequestReply=0 > countHandleEmptyCreditRequestReply=0 > isGusher=1 > > > ------------------------------------------------------- > SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media > 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 > Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. > http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 > > _______________________________________________ > hpoj-devel mailing list > hpo...@li... > https://lists.sourceforge.net/lists/listinfo/hpoj-devel |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X