Menu
▾
▴
hpoj-devel
|
From: Der B. <der...@ho...> - 2004-04-30 16:42:49
|
Hello,
I recently purchased a OfficeJet V40 (USB). The device is correctly listed
in /proc/bus/usb/devices, but when I run "ptal-init setup", it finds no
device. The probe for /dev/usb/lp0 takes about 15 seconds; the ones after
that takes less than one second each. None of the probes is successful.
The computer that the OfficeJet is connected to is running Debian Woody and
the 2.6.5 kernel. The version of HPOJ is 0.8-11. Here are the first few
lines from syslog after invoking ptal-init:
Apr 30 18:24:24 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>,
pid=27048, errno=111 ptal-mlcd successfully initialized.
Apr 30 18:24:39 playa ptal-mlcd: ERROR at
transport/ExMlcCommandChannel.cpp:243, dev=<usb:probe>, pid=27048, errno=11
Reply timer popped on port=0, count=1!
Apr 30 18:24:39 playa ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:probe>,
pid=27048, errno=25 exClose(reason=0x3002)
Apr 30 18:24:40 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>,
pid=27072, errno=111 ptal-mlcd successfully initialized.
Apr 30 18:24:41 playa ptal-mlcd: ERROR at ExMgr.cpp:2332, dev=<usb:probe>,
pid=27072, errno=19 Couldn't find device!
Apr 30 18:24:41 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>,
pid=27080, errno=111 ptal-mlcd successfully initialized.
Should I try:
- compiling the latest version of HPOJ (0.91) since I have 0.8 installed, or
- going back from kernel 2.6.5 to 2.6.2 since the latest kernels seem to
have USB issues, or
- is there anything else I may have overlooked?
Thanks,
Peter
_________________________________________________________________
Check out the coupons and bargains on MSN Offers! http://youroffers.msn.com
|
|
From: Der B. <der...@ho...> - 2004-05-01 12:32:36
|
Hello,
I recently purchased a OfficeJet V40 (USB). The device is correctly listed
in /proc/bus/usb/devices, but when I run "ptal-init setup", it finds no
device. The probe for /dev/usb/lp0 takes about 15 seconds; the ones after
that takes less than one second each. None of the probes is successful.
The computer that the OfficeJet is connected to is running Debian Woody and
the 2.6.5 kernel. The version of HPOJ is 0.8-11. Here are the first few
lines from syslog after invoking ptal-init:
Apr 30 18:24:24 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>,
pid=27048, errno=111 ptal-mlcd successfully initialized.
Apr 30 18:24:39 playa ptal-mlcd: ERROR at
transport/ExMlcCommandChannel.cpp:243, dev=<usb:probe>, pid=27048, errno=11
Reply timer popped on port=0, count=1!
Apr 30 18:24:39 playa ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:probe>,
pid=27048, errno=25 exClose(reason=0x3002)
Apr 30 18:24:40 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>,
pid=27072, errno=111 ptal-mlcd successfully initialized.
Apr 30 18:24:41 playa ptal-mlcd: ERROR at ExMgr.cpp:2332, dev=<usb:probe>,
pid=27072, errno=19 Couldn't find device!
Apr 30 18:24:41 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>,
pid=27080, errno=111 ptal-mlcd successfully initialized.
Should I try:
- compiling the latest version of HPOJ (0.91) since I have 0.8 installed, or
- going back from kernel 2.6.5 to 2.6.2 since the latest kernels seem to
have USB issues, or
- is there anything else I may have overlooked?
Thanks,
Peter
_________________________________________________________________
Express yourself with the new version of MSN Messenger! Download today -
it's FREE! http://messenger.msn.com/go/onm00200471ave/direct/01/
|
|
From: Cory M. <cor...@hp...> - 2004-05-04 17:24:27
|
On Sat, 2004-05-01 at 05:23, Der Benutzer wrote: > Hello, > > I recently purchased a OfficeJet V40 (USB). The device is correctly listed > in /proc/bus/usb/devices, but when I run "ptal-init setup", it finds no > device. The probe for /dev/usb/lp0 takes about 15 seconds; the ones after > that takes less than one second each. None of the probes is successful. > The computer that the OfficeJet is connected to is running Debian Woody and > the 2.6.5 kernel. The version of HPOJ is 0.8-11. Here are the first few > lines from syslog after invoking ptal-init: > > Apr 30 18:24:24 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27048, errno=111 ptal-mlcd successfully initialized. > Apr 30 18:24:39 playa ptal-mlcd: ERROR at > transport/ExMlcCommandChannel.cpp:243, dev=<usb:probe>, pid=27048, errno=11 > Reply timer popped on port=0, count=1! > Apr 30 18:24:39 playa ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:probe>, > pid=27048, errno=25 exClose(reason=0x3002) > Apr 30 18:24:40 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27072, errno=111 ptal-mlcd successfully initialized. > Apr 30 18:24:41 playa ptal-mlcd: ERROR at ExMgr.cpp:2332, dev=<usb:probe>, > pid=27072, errno=19 Couldn't find device! > Apr 30 18:24:41 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27080, errno=111 ptal-mlcd successfully initialized. > > Should I try: > - compiling the latest version of HPOJ (0.91) since I have 0.8 installed, or Yes! The newer version has lots of fixes. Be sure to install libusb-devel first! > - going back from kernel 2.6.5 to 2.6.2 since the latest kernels seem to > have USB issues, or > - is there anything else I may have overlooked? I'm running 2.6.5 on two machines here with out any issues... Cory hp linux printing team > Thanks, > > Peter > > _________________________________________________________________ > Express yourself with the new version of MSN Messenger! Download today - > it's FREE! http://messenger.msn.com/go/onm00200471ave/direct/01/ > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: Oracle 10g > Get certified on the hottest thing ever to hit the market... Oracle 10g. > Take an Oracle 10g class now, and we'll give you the exam FREE. > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click > > _______________________________________________ > hpoj-devel mailing list > hpo...@li... > https://lists.sourceforge.net/lists/listinfo/hpoj-devel -- Cory Meisch <cor...@hp...> HP Vancouver Linux Printing Team (360) 212-7009 |
|
From: Laurence O. <lau...@or...> - 2004-05-01 17:18:21
|
On Fri, 2004-04-30 at 17:31, Der Benutzer wrote: > Hello, > > I recently purchased a OfficeJet V40 (USB). The device is correctly listed > in /proc/bus/usb/devices, but when I run "ptal-init setup", it finds no > device. The probe for /dev/usb/lp0 takes about 15 seconds; the ones after > that takes less than one second each. None of the probes is successful. > The computer that the OfficeJet is connected to is running Debian Woody and > the 2.6.5 kernel. The version of HPOJ is 0.8-11. Here are the first few > lines from syslog after invoking ptal-init: > > Apr 30 18:24:24 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27048, errno=111 ptal-mlcd successfully initialized. > Apr 30 18:24:39 playa ptal-mlcd: ERROR at > transport/ExMlcCommandChannel.cpp:243, dev=<usb:probe>, pid=27048, errno=11 > Reply timer popped on port=0, count=1! > Apr 30 18:24:39 playa ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:probe>, > pid=27048, errno=25 exClose(reason=0x3002) > Apr 30 18:24:40 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27072, errno=111 ptal-mlcd successfully initialized. > Apr 30 18:24:41 playa ptal-mlcd: ERROR at ExMgr.cpp:2332, dev=<usb:probe>, > pid=27072, errno=19 Couldn't find device! > Apr 30 18:24:41 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27080, errno=111 ptal-mlcd successfully initialized. > > Should I try: > - compiling the latest version of HPOJ (0.91) since I have 0.8 installed, or > - going back from kernel 2.6.5 to 2.6.2 since the latest kernels seem to > have USB issues, or > - is there anything else I may have overlooked? > Thanks, > > Peter > Hi Peter First I would try updating the HPOJ to 0.91, that seems to work ok on FC1. Laurence |
|
From: russbucket <rus...@ce...> - 2004-05-01 18:27:22
|
I just had problems with my HP OfficeJet G55 not printing. CUPS would see it but nothing printed. I was told to upgrade my hpoj to .91 and now everything is working (printer). My scanner function died several years ago so I have not been able to use the scan function. I run SuSE 9.0 "Der Benutzer" <der...@ho...> wrote in message news:BAY...@ho...... > Hello, > > I recently purchased a OfficeJet V40 (USB). The device is correctly listed > in /proc/bus/usb/devices, but when I run "ptal-init setup", it finds no > device. The probe for /dev/usb/lp0 takes about 15 seconds; the ones after > that takes less than one second each. None of the probes is successful. > The computer that the OfficeJet is connected to is running Debian Woody and > the 2.6.5 kernel. The version of HPOJ is 0.8-11. Here are the first few > lines from syslog after invoking ptal-init: > > Apr 30 18:24:24 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27048, errno=111 ptal-mlcd successfully initialized. > Apr 30 18:24:39 playa ptal-mlcd: ERROR at > transport/ExMlcCommandChannel.cpp:243, dev=<usb:probe>, pid=27048, errno=11 > Reply timer popped on port=0, count=1! > Apr 30 18:24:39 playa ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:probe>, > pid=27048, errno=25 exClose(reason=0x3002) > Apr 30 18:24:40 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27072, errno=111 ptal-mlcd successfully initialized. > Apr 30 18:24:41 playa ptal-mlcd: ERROR at ExMgr.cpp:2332, dev=<usb:probe>, > pid=27072, errno=19 Couldn't find device! > Apr 30 18:24:41 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > pid=27080, errno=111 ptal-mlcd successfully initialized. > > Should I try: > - compiling the latest version of HPOJ (0.91) since I have 0.8 installed, or > - going back from kernel 2.6.5 to 2.6.2 since the latest kernels seem to > have USB issues, or > - is there anything else I may have overlooked? > Thanks, > > Peter > > _________________________________________________________________ > Check out the coupons and bargains on MSN Offers! http://youroffers.msn.com > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: Oracle 10g > Get certified on the hottest thing ever to hit the market... Oracle 10g. > Take an Oracle 10g class now, and we'll give you the exam FREE. > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click |
|
From: Laurence O. <lau...@or...> - 2004-05-01 23:51:53
|
On Sat, 2004-05-01 at 19:32, russbucket wrote: > I just had problems with my HP OfficeJet G55 not printing. CUPS would see it > but nothing printed. I was told to upgrade my hpoj to .91 and now everything > is working (printer). My scanner function died several years ago so I have > not been able to use the scan function. I run SuSE 9.0 What programs have you tried with the scanner? Laurence > "Der Benutzer" <der...@ho...> wrote > in message news:BAY...@ho...... > > Hello, > > > > I recently purchased a OfficeJet V40 (USB). The device is correctly listed > > in /proc/bus/usb/devices, but when I run "ptal-init setup", it finds no > > device. The probe for /dev/usb/lp0 takes about 15 seconds; the ones after > > that takes less than one second each. None of the probes is successful. > > The computer that the OfficeJet is connected to is running Debian Woody > and > > the 2.6.5 kernel. The version of HPOJ is 0.8-11. Here are the first few > > lines from syslog after invoking ptal-init: > > > > Apr 30 18:24:24 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > > pid=27048, errno=111 ptal-mlcd successfully initialized. > > Apr 30 18:24:39 playa ptal-mlcd: ERROR at > > transport/ExMlcCommandChannel.cpp:243, dev=<usb:probe>, pid=27048, > errno=11 > > Reply timer popped on port=0, count=1! > > Apr 30 18:24:39 playa ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:probe>, > > pid=27048, errno=25 exClose(reason=0x3002) > > Apr 30 18:24:40 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > > pid=27072, errno=111 ptal-mlcd successfully initialized. > > Apr 30 18:24:41 playa ptal-mlcd: ERROR at ExMgr.cpp:2332, dev=<usb:probe>, > > pid=27072, errno=19 Couldn't find device! > > Apr 30 18:24:41 playa ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:probe>, > > pid=27080, errno=111 ptal-mlcd successfully initialized. > > > > Should I try: > > - compiling the latest version of HPOJ (0.91) since I have 0.8 installed, > or > > - going back from kernel 2.6.5 to 2.6.2 since the latest kernels seem to > > have USB issues, or > > - is there anything else I may have overlooked? > > Thanks, > > > > Peter > > > > _________________________________________________________________ > > Check out the coupons and bargains on MSN Offers! > http://youroffers.msn.com > > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by: Oracle 10g > > Get certified on the hottest thing ever to hit the market... Oracle 10g. > > Take an Oracle 10g class now, and we'll give you the exam FREE. > > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: Oracle 10g > Get certified on the hottest thing ever to hit the market... Oracle 10g. > Take an Oracle 10g class now, and we'll give you the exam FREE. > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click > > _______________________________________________ > hpoj-devel mailing list > hpo...@li... > https://lists.sourceforge.net/lists/listinfo/hpoj-devel |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X