---------- Forwarded message ----------
From: dwelch91 <dwelch91@gmail.com>
Date: Oct 27, 2007 1:11 PM
Subject: Re: [Hplip-help] scanimage -L not working
To: tlha.tlha@laposte.net

Try removing or commenting out all the SANE backends that you don't need and then try again. You can do this by editing the file: /etc/sane.d/dll.conf (comment out lines with a # character). Only leave the "net" and "hpaio" lines.

-Don



On 10/27/07, tlha.tlha@laposte.net <tlha.tlha@laposte.net > wrote:
scanimage -L stopped at "initializing backend `geniusvp2'"

Thierry

p722931@debiantl:/etc/sane.d$ scanimage -L
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18
[dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ...
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras
[dll] sane_init/read_config: reading dll.d/libsane-extras
[dll] add_backend: adding backend `epkowa'
[dll] add_backend: adding backend `geniusvp2'
[dll] add_backend: adding backend `hp_rts88xx'
[dll] add_backend: adding backend `hp3900'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `hpaio'
[dll] add_backend: `hpaio' is already there
[dll] sane_get_devices
[dll] load: searching backend `hpaio' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1 '
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] load: searching backend `hp3900' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane- hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp_rts88xx' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hp_rts88xx.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hp_rts88xx.so.1'
[dll] init: initializing backend `hp_rts88xx'
[dll] load: searching backend `geniusvp2' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-geniusvp2.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-geniusvp2.so.1'
[dll] init: initializing backend `geniusvp2'

__________________________________________________________________________
> Message du 27/10/07 20:38
> De : "dwelch91"
> A : "thierry LEMARE"
> Copie à : hplip-help@lists.sourceforge.net
> Objet : Re: [Hplip-help] scanimage -L not working
>
> Please try troubleshooting with these instructions:
>
> http://hplip.sourceforge.net/troubleshooting/scanning.html
>
> -Don
>
>
>
> On 10/27/07, thierry LEMARE wrote:
> >
> > I havec a PC with debain etch 4.0r0 and an hp multi-fonction PSC2350.
> > I have installed hplip 2.7.10.
> > With debian sarge and hplip, everything worked.
> > But now I can print but scanning doesn't work.
> > # scanimage -L doesn't give any answer and I must terminate this command
> > with ctrl c.
> > hp-check doesnt give any error (exception on scanimage -L). See
> > hp-check.log below.
> >
> > What is wrong ?
> > Thanks for your help,
> >
> > Thierry
> > ______________________________
> > hp-check[29690]: info: :
> > Initializing. Please wait...
> > scheduler is running
> >
> > 1.2.7
> >
> > Linux debiantl 2.6.18-5-486 #1 Tue Oct 2 23:38:54 UTC 2007 i686
> > GNU/Linux
> >
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :---------------
> > hp-check[29690]: info: :| SYSTEM INFO |
> > hp-check[29690]: info: :---------------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mBasic system information:[0m
> > hp-check[29690]: info: :Linux debiantl 2.6.18-5-486 #1 Tue Oct 2
> > 23:38:54 UTC 2007 i686 GNU/Linux
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mDistribution:[0m
> > hp-check[29690]: info: :debian 4.0
> > hp-check[29690]: info: :[01m
> > HPOJ running?[0m
> > hp-check[29690]: info: :No, HPOJ is not running (OK).
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking Python version...[0m
> > hp-check[29690]: info: :OK, version 2.4.4 installed
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking PyQt version...[0m
> > hp-check[29690]: info: :OK, version 3.16 installed.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking SIP version...[0m
> > hp-check[29690]: info: :OK, Version 4.4.5 installed
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for CUPS...[0m
> > hp-check[29690]: info: :Status: scheduler is running
> > hp-check[29690]: info: :Version: 1.2.7
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for Reportlab...[0m
> > hp-check[29690]: info: :OK, version >= 2.0
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :----------------
> > hp-check[29690]: info: :| DEPENDENCIES |
> > hp-check[29690]: info: :----------------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: cups - Common Unix
> > Printing System...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: cups-devel- Common
> > Unix Printing System development files...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: gcc - GNU Project C
> > and C++ Compiler...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: GhostScript -
> > PostScript and PDF language interpreter and previewer...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: libcrypto - OpenSSL
> > cryptographic library...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: libjpeg - JPEG
> > library...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: libnetsnmp-devel -
> > SNMP networking library development files...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: libpthread - POSIX
> > threads library...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: libtool - Library
> > building support services...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: libusb - USB
> > library...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: make - GNU make
> > utility to maintain groups of programs...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: PIL - Python
> > Imaging Library (required for commandline scanning with hp-scan)...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: ppdev - Parallel
> > port support kernel module....[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: PyQt - Qt interface
> > for Python...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: python-devel -
> > Python development files...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: Python 2.3 or
> > greater - Required for fax functionality...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: Python 2.2 or
> > greater - Python programming language...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: Reportlab - PDF
> > library for Python...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: SANE - Scanning
> > library...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: SANE - Scanning
> > library development files...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: scanimage - Shell
> > scanning program...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for dependency: xsane - Graphical
> > scanner frontend for SANE...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :----------------------
> > hp-check[29690]: info: :| HPLIP INSTALLATION |
> > hp-check[29690]: info: :----------------------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mCurrently installed HPLIP version...[0m
> > hp-check[29690]: info: :HPLIP 2.7.10 currently installed in
> > '/usr/share/hplip'.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mCurrent contents of '/etc/hp/hplip.conf'
> > file:[0m
> > hp-check[29690]: info: :# hplip.conf. Generated from hplip.conf.in by
> > configure.
> >
> > [hpssd]
> > # Note: hpssd does not support dynamic ports
> > # Port 2207 is the IANA assigned port for hpssd
> > port=2207
> >
> > [hplip]
> > version= 2.7.10
> >
> > [dirs]
> > home=/usr/share/hplip
> > run=/var/run
> > ppd=/usr/share/ppd/hpijs/HP
> > ppdbase=/usr/share/ppd/hpijs
> > doc=/usr/share/doc/hplip- 2.7.10
> > icon=/usr/share/applications
> > cupsbackend=/usr/lib/cups/backend
> > foomatic=/usr/share/foomatic
> >
> > # Following values are determined at configure time and cannot be
> > changed.
> > [configure]
> > network-build=yes
> > pp-build=no
> > gui-build=yes
> > scanner-build=yes
> > fax-build=yes
> > cups11-build=no
> > doc-build=yes
> > shadow-build=no
> > foomatic-xml-install=no
> > foomatic-ppd-install=yes
> > internal-tag= 2.7.10.11
> >
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :----------------------
> > hp-check[29690]: info: :| INSTALLED PRINTERS |
> > hp-check[29690]: info: :----------------------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mPSC_2350[0m
> > hp-check[29690]: info: :[01m--------[0m
> > hp-check[29690]: info: :Type: Printer
> > hp-check[29690]: info: :Installed in HPLIP?: Yes, using the hp: CUPS
> > backend.
> > hp-check[29690]: info: :Device URI:
> > hp:/usb/PSC_2350_series?serial=MY5BCF431MKJ
> > hp-check[29690]: info: :PPD: /etc/cups/ppd/PSC_2350.ppd
> > hp-check[29690]: info: :PPD Description: HP PSC 2350 Foomatic/hpijs
> > (recommended)
> > hp-check[29690]: info: :Printer status: printer PSC_2350 is idle.
> > enabled since sam 27 oct 2007 14:27:06 CEST
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :----------------------
> > hp-check[29690]: info: :| SANE CONFIGURATION |
> > hp-check[29690]: info: :----------------------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01m'hpaio' in '/etc/sane.d/dll.conf'...[0m
> > hp-check[29690]: info: :OK, found. SANE backend 'hpaio' is properly set
> > up.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking output of 'scanimage -L'...[0m
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :---------------------
> > hp-check[29690]: info: :| PYTHON EXTENSIONS |
> > hp-check[29690]: info: :---------------------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking 'cupsext' CUPS extension...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking 'pcardext' Photocard
> > extension...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking 'hpmudext' I/O extension...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking 'scanext' SANE scanning
> > extension...[0m
> > hp-check[29690]: info: :OK, found.
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :-----------------
> > hp-check[29690]: info: :| USB I/O SETUP |
> > hp-check[29690]: info: :-----------------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[01mChecking for permissions of USB attached
> > printers...[0m
> > hp-check[29690]: info: :HP Device 0x4911 at 001:006:
> > hp-check[29690]: info: : Device URI:
> > hp:/usb/PSC_2350_series?serial=MY5BCF431MKJ
> > hp-check[29690]: info: : Device node: /dev/bus/usb/001/006
> > hp-check[29690]: info: : Mode: 0666
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :-----------
> > hp-check[29690]: info: :| SUMMARY |
> > hp-check[29690]: info: :-----------
> > hp-check[29690]: info: :
> > hp-check[29690]: info: :[32;01mNo errors or warnings.[0m
> >
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Splunk Inc.
> > Still grepping through log files to find problems? Stop.
> > Now Search log events and configuration files using AJAX and a browser.
> > Download your FREE copy of Splunk now >> http://get.splunk.com/
> > _______________________________________________
> > HPLIP-Help mailing list
> > HPLIP-Help@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/hplip-help
> >
>



Créez votre adresse électronique prénom.nom@laposte.net
1 Go d'espace de stockage, anti-spam et anti-virus intégrés.