[Hp5400backend-devel] (no subject)

[ACCART J. <big...@fr...>]

Hi everybody,

You'll quickly see that I'm french so I apologize now for all mistakes
I'll do. ;)

It is very nice developping drivers like you do. Thx a lot.

I spend all the day trying making work my HP 5400C. My kernel seems to
know my scanner but sane don't. :(
See :

dmesg
[root@Tux sane.d]# dmesg
hub.c: new USB device 00:1d.1-2, assigned address 4
scanner.c: USB scanner device (0x03f0/0x1005) now attached to scanner0

[root@Tux sane.d]# lsusb
Bus 002 Device 004: ID 03f0:1005 Hewlett-Packard 
[root@Tux sane.d]# sane-find-scanner -q
found USB scanner (vendor=0x03f0, product=0x1005) at /dev/usb/scanner0
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1005 [HP
Scanjet 5400C Series]) at libusb:002:004

[root@Tux sane.d]# scanimage -L 
No scanners were identified. 
(xsane don't work too)

[root@Tux sane.d]# scanimage -d hp5400:/dev/usb/scanner0 >> tmp.scn
scanimage: open of device hp5400:/dev/usb/scanner0 failed: Operation not
supported

I tried hp5400.conf with /dev/usb/scanner0 and with usb 0x03F0 0x1005
dll.conf contains the hp5400 line

I have a Mandrake 9.2 and installed  sane-backends-1.0.14. I tried the
beta1 backend and the result is the same.

I have also read
http://sourceforge.net/mailarchive/forum.php?thread_id=1924996&forum_id=24635 and followed the intrusions but it doesn't still work.

Do you have any idea?
-- 

Julius