[Hp3300backend-devel] usb problem?

[Joshua N P. <jpr...@po...>]

I have a ScanJet 3400C.  I am running Linux 2.6.7 i386.  This is the
first time I am trying to use my scanner since I upgraded to 2.6.

There seems to be a problem with USB.  When I insert the USB
connector, the syslog reports:

Sep  4 10:21:07 emit kernel: ohci_hcd 0000:00:02.0: remote wakeup
Sep  4 10:21:07 emit kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.ports=
tatus [2] =3D 0x00010101 CSC PPS CCS
Sep  4 10:21:07 emit kernel: hub 1-0:1.0: port 2, status 0101, change 0001,=
 12 Mb/s
Sep  4 10:21:07 emit kernel: hub 1-0:1.0: debounce: port 2: delay 100ms sta=
ble 4 status 0x101
Sep  4 10:21:07 emit kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.ports=
tatus [2] =3D 0x00100103 PRSC PPS PES CCS
Sep  4 10:21:07 emit kernel: usb 1-2: new full speed USB device using addre=
ss 5
Sep  4 10:21:07 emit kernel: usb 1-2: new device strings: Mfr=3D10, Product=
=3D11, SerialNumber=3D12
Sep  4 10:21:07 emit kernel: usb 1-2: default language 0x0409
Sep  4 10:21:12 emit kernel: usb 1-2: control timeout on ep0in
Sep  4 10:21:22 emit last message repeated 2 times
Sep  4 10:21:27 emit kernel: usb 1-2: control timeout on ep0out
Sep  4 10:21:27 emit kernel: usb 1-2: can't set config #1, error -110
Sep  4 10:21:27 emit kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.ports=
tatus [2] =3D 0x00100103 PRSC PPS PES CCS
Sep  4 10:21:27 emit kernel: usb 1-2: new full speed USB device using addre=
ss 6
Sep  4 10:21:27 emit kernel: usb 1-2: new device strings: Mfr=3D10, Product=
=3D11, SerialNumber=3D12
Sep  4 10:21:27 emit kernel: usb 1-2: default language 0x0409
Sep  4 10:21:33 emit kernel: usb 1-2: control timeout on ep0in
Sep  4 10:21:43 emit last message repeated 2 times
Sep  4 10:21:48 emit kernel: usb 1-2: control timeout on ep0out
Sep  4 10:21:48 emit kernel: usb 1-2: can't set config #1, error -110

The scanner never appears in /proc/bus/usb/devices.  However, the
scanner is fine because when I plug into Knoppix 3.3 (kernel 2.4.22)
then it DOES appear in /proc/bus/usb/devices.

Is this a USB bug?  Where should I report the problem?

--=20
A new cognitive theory of emotion, http://openheartlogic.org