Bryan,
Thanks for the reply -- this is the information I needed. I just discovered
section 2.17.3 of the HL7 2.4 standard :).
On another note, I am also interested in contributing to the project. If
interested, let me know how to proceed.
Phil
----- Original Message -----
From: "Tripp, Bryan" <Bry...@uh...>
To: "'Phillip E. Trewhella'" <pt...@tr...>;
<hl7...@li...>
Sent: Wednesday, May 28, 2003 1:29 PM
Subject: RE: [HAPI-devel] Missing ADT in Generated 2.4 Model?
> > Hi Phil,
> >
> > > 0.3 release is missing some ADT messages (such as A04).
> >
> > The A04 trigger uses the A01 message structure, so you would
> > just code against the ADT_A01 class.
> >
> > If you are receiving messages, the parser doesn't have a
> > place to look up which structures are shared by which
> > triggers, so MSH-9-3 must be populated. For A04, MSH-9
> > should be "ADT^A04^ADT_A01".
> >
> > Hope that helps.
> >
> > Bryan
> >
>
>
> This e-mail may contain confidential and/or privileged information
> for the sole use of the intended recipient. Any review or distribution
> by anyone other than the person for whom it was originally intended is
> strictly
> prohibited. If you have received this e-mail in error, please contact the
> sender and
> delete all copies. Opinions, conclusions or other information contained in
> this e-mail may not be that of the organization.
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: eBay
> Get office equipment for less on eBay!
> http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
> _______________________________________________
> Hl7api-devel mailing list
> Hl7...@li...
> https://lists.sourceforge.net/lists/listinfo/hl7api-devel
>
|
