Hardware

Hardware notes; focusing on what needs to be done:

NAND
size = 32 'MiB' (u-boot display)
Type = NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit)

NOR Flash
Size = 512 kB (u-boot display)

Wireless:
wifi0: Atheros 5416 Owl emulation: mem=0x18000000, irq=22 hw_base=0xb8000000

some GPIO info:
<4>[ 25.540000] Config DANUBE FXO reset using GPIO-10
<4>[ 25.540000] Config DANUBE FXO interrupt using GPIO-1
<4>[ 25.540000] Config DANUBE FXO Chip Select using GPIO-9

USB GPIO 13

Original Bootlog:

<4>[ 0.000000] PORTA2: detected HW revision 7
<4>[ 0.000000]
<4>[ 0.000000] Applying Patch for CPU1 IRQ Issue
<4>[ 0.000000] memsize=64M
<4>[ 0.000000] Reserving memory for CP1 @0xa3f00000
<4>[ 0.000000] memsize=63M
<4>[ 0.000000] CPU revision is: 00019641
<4>[ 0.000000] Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 16kB 4-way, linesize 32 bytes.
<4>[ 0.000000] Linux version 2.4.21openrg-rmk1 #4 Thu Apr 2 13:03:40 IDT 2009
<4>[ 0.000000] Determined physical RAM map:
<4>[ 0.000000] memory: 00100000 @ 03f00000 (reserved)
<4>[ 0.000000] User-defined physical RAM map:
<4>[ 0.000000] memory: 03f00000 @ 00000000 (usable)
<4>[ 0.000000] On node 0 totalpages: 16128
<4>[ 0.000000] zone(0): 16128 pages.
<4>[ 0.000000] zone(1): 0 pages.
<4>[ 0.000000] zone(2): 0 pages.
<4>[ 0.000000] Kernel command line: mem=64512K
<4>[ 0.000000] mips_counter_frequency:166666667
<4>[ 0.000000] r4k_offset: 00196e6a(1666666)
<4>[ 0.000000] Calibrating delay loop... 222.00 BogoMIPS
<6>[ 0.240000] Memory: 51256k/64512k available (2371k kernel code, 13256k reserved, 9608k data, 8k init, 0k highmem)
<6>[ 1.090000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 1.090000] Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 1.090000] Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>[ 1.090000] Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>[ 1.090000] Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>[ 1.090000] Checking for 'wait' instruction... unavailable.
<4>[ 1.090000] POSIX conformance testing by UNIFIX
<4>[ 1.100000] PCI: Probing PCI hardware on host bus 0.
<4>[ 1.100000] Autoconfig PCI channel 0x802a9180
<4>[ 1.100000] Scanning bus 00, I/O 0x1ae00000:0x1b000001, Mem 0x18000000:0x1a000001
<4>[ 1.100000] 00:0e.0 Class 0200: 168c:ff1d (rev 01)
<4>[ 1.100000] Mem at 0x18000000 [size=0x10000]
<6>[ 1.100000] Linux NET4.0 for Linux 2.4
<6>[ 1.100000] Based upon Swansea University Computer Society NET3.039
<4>[ 1.100000] Initializing RT netlink socket
<4>[ 1.100000] Starting kswapd
<6>[ 1.100000] Journalled Block Device driver loaded
<4>[ 1.100000] fuse init (API version 7.5)
<6>[ 1.100000] Initializing Cryptographic API
<6>[ 1.100000] loop: loaded (max 8 devices)
<6>[ 1.100000] SCSI subsystem driver Revision: 1.00
<6>[ 1.100000] md: raid0 personality registered as nr 2
<6>[ 1.100000] md: raid1 personality registered as nr 3
<6>[ 1.100000] md: raid5 personality registered as nr 4
<6>[ 1.100000] raid5: measuring checksumming speed
<4>[ 1.150000] 8regs : 225.200 MB/sec
<4>[ 1.200000] 32regs : 286.800 MB/sec
<4>[ 1.200000] raid5: using function: 32regs (286.800 MB/sec)
<6>[ 1.200000] md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>[ 1.200000] md: Autodetecting RAID arrays.
<6>[ 1.200000] md: autorun ...
<6>[ 1.200000] md: ... autorun DONE.
<6>[ 1.200000] NET4: Linux TCP/IP 1.0 for NET4.0
<6>[ 1.200000] IP Protocols: ICMP, UDP, TCP, IGMP
<6>[ 1.200000] IP: routing cache hash table of 512 buckets, 4Kbytes
<6>[ 1.200000] TCP: Hash tables configured (established 4096 bind 8192)
<6>[ 1.200000] IPv4 over IPv4 tunneling driver
<6>[ 1.200000] GRE over IPv4 tunneling driver
<6>[ 1.200000] NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>[ 1.200000] IPv6 v0.8 (usagi-stable-4.1, 20030214) for NET4.0
<6>[ 1.200000] IPv6 over IPv4 tunneling driver
<1>[ 1.200000] 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com
<1>[ 1.200000] All bugs added by David S. Miller davem@redhat.com
<6>[ 1.200000] usb.c: registered new driver usbdevfs
<6>[ 1.200000] usb.c: registered new driver hub
<6>[ 1.200000] Initializing USB Mass Storage driver...
<6>[ 1.200000] usb.c: registered new driver usb-storage
<6>[ 1.200000] USB Mass Storage support registered.
<6>[ 1.200000] cgu: misc_register on minor = 63
<4>[ 1.200000] ppe: ATM init succeeded (firmware version 1.1.0.2.1.13)
<4>[ 1.200000] Infineon DEU initialization.
<6>[ 1.200000] deu_init(): calling ifxdeu_init_des()
<4>[ 1.200000] ifxdeu des initialize!
<6>[ 1.200000] deu_init(): calling ifxdeu_init_aes()
<4>[ 1.200000] ifxdeu aes initialize!
<1>[ 1.200000] ifxdeu nitialized OK. Device Major : 254
<4>[ 1.200000] danube MAC driver loaded!
<6>[ 1.200000] gptu: totally 6 16-bit timers/counters
<6>[ 1.200000] gptu: misc_register on minor 62
<6>[ 1.200000] gptu: succeeded to request irq 118
<6>[ 1.200000] gptu: succeeded to request irq 119
<6>[ 1.200000] gptu: succeeded to request irq 120
<6>[ 1.200000] gptu: succeeded to request irq 121
<6>[ 1.200000] gptu: succeeded to request irq 122
<6>[ 1.200000] gptu: succeeded to request irq 123
<6>[ 1.200000] DANUBE MIPS24KEc MPS mailbox driver, Version 1.2.6
<6>[ 1.200000] (c) Copyright 2006, Infineon Technologies AG
<4>[ 1.200000] ifx_mps_init_gpt_danube() - attaching to rising edge...
<4>[ 1.200000] ifx_mps_init_gpt_danube() - calibration done, waited 62 loops!
<6>[ 1.200000] IFX_MPS: using proc fs
<6>[ 1.210000] NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit)
<6>[ 1.210000] Scanning device for bad blocks
<5>[ 1.260000] Creating 3 MTD partitions on "Danube Nand Controller":
<5>[ 1.260000] 0x00000000-0x02000000 : "OpenRG Images"
<5>[ 1.260000] 0x01e00000-0x02000000 : "Dect configuration"
<5>[ 1.260000] 0x00000000-0x00004000 : "Atheros EEPROM"
<4>[ 1.260000] Init NAND controller succeeded!
<1>[ 1.260000] oamk: init_module() called.
<1>[ 1.270000] Opening oam kernel socket
<1>[ 1.270000] oamk: init_module() returned.
<4>[ 1.270000] Danube Port Initialization
<4>[ 1.270000] ttyS0 at MEM 0xbe100400 (irq = 2) is a IFX_ASC
<4>[ 1.270000] ttyS1 at MEM 0xbe100c00 (irq = 9) is a IFX_ASC
<4>[ 1.280000] VFS: Mounted root (tmpfs filesystem).
<4>[ 1.280000] Mount of initial cramfs successful
<6>[ 1.490000] Freeing init cramfs memory: 64k freed
<6>[ 1.490000] Freeing unused kernel memory: 8k freed
<4>[ 1.490000] Mounting cramfs image at 'cramfs'
<6>[ 1.490000] klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.99
<4>[ 2.150000] Algorithmics/MIPS FPU Emulator v1.5
<4>[ 6.080000] Danube MEI version:1.00.09
<4>[ 6.080000] Danube MEI MIB version:0.90.04
<7>[ 6.140000] mib_poll_init: Starting mib_poll...
<7>[ 6.240000] adsl_mib_poll: Inside mib poll loop ...
<4>[ 7.200000] Loading license 27b32d1bd167c7b5b96d2bbcc29f318d838bc6844712cfe1d10442762c9a506f3036fbf3e00e190cfe9456043a9ae4fb972b876fffed17b576a146f89e6a3111c94f32611b221145371bb7f5b3398c0de42b7cffe847cecc617866872263ef.SHC
<4>[ 7.200000] loading license key: SHC
<4>[ 7.250000] loading license key: SHC
<6>[ 8.130000] JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
<6>[ 8.570000] ath_hal: 0.9.14.25 (AR5416, REGOPS_FUNC)
<6>[ 9.080000] wlan: 0.8.4.2 (Atheros/multi-bss)
<6>[ 9.130000] ath_rate_atheros: Version 2.0.1
<4>[ 9.130000] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
<6>[ 9.180000] ath_dfs: Version 2.0.0
<4>[ 9.180000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
<6>[ 9.290000] wlan: mac acl policy registered
<6>[ 9.670000] ath_pci: 0.9.4.5 (Atheros/multi-bss)
<6>[ 9.670000] ath_pci: CR-LSDK-1.3.1.115
<6>[ 9.680000] Changelist :0 Date: 0
<4>[ 9.690000] Chan Freq RegPwr HT CTL CTL_U CTL_L DFS
<4>[ 9.690000] 1 2412n 20 HT20 1 0 1 N
<4>[ 9.690000] 1 2412n 20 HT40 1 0 1 N
<4>[ 9.690000] 2 2417n 20 HT40 1 0 1 N
<4>[ 9.690000] 3 2422n 20 HT40 1 1 1 N
<4>[ 9.690000] 4 2427n 20 HT40 1 1 1 N
<4>[ 9.690000] 5 2432n 20 HT40 1 1 1 N
<4>[ 9.690000] 6 2437n 20 HT40 1 1 1 N
<4>[ 9.690000] 7 2442n 20 HT40 1 1 1 N
<4>[ 9.690000] 8 2447n 20 HT40 1 1 1 N
<4>[ 9.690000] 9 2452n 20 HT40 1 1 1 N
<4>[ 9.690000] 10 2457n 20 HT40 1 1 1 N
<4>[ 9.690000] 11 2462n 20 HT40 1 1 1 N
<4>[ 9.690000] 12 2467n 20 HT40 1 1 0 N
<4>[ 9.690000] 13 2472n 20 HT40 1 1 0 N
<4>[ 9.700000] dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
<4>[ 9.700000] DFS min filter rssiThresh = 21
<4>[ 9.700000] DFS max pulse dur = 131 ticks
<4>[ 9.740000] wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 9.740000] wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 9.740000] wifi0: mac 31.1 phy 11.0 radio 13.0
<4>[ 9.740000] wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>[ 9.740000] wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>[ 9.740000] wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>[ 9.740000] wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>[ 9.740000] wifi0: Use hw queue 8 for CAB traffic
<4>[ 9.740000] wifi0: Use hw queue 9 for beacons
<4>[ 9.740000] wifi0: Use hw queue 7 for UAPSD
<6>[ 9.740000] wifi0: Atheros 5416 Owl emulation: mem=0x18000000, irq=22 hw_base=0xb8000000
<6>[ 24.640000] RATELIMIT: 2 messages of type IPSec kernel packet reported 23 second(s) ago
<4>[ 24.640000] ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0
<4>[ 24.850000] IPV4 device driver registered
<4>[ 25.120000] IFX TAPI, version 3.6.1.11, (c) 2007 Infineon Technologies AG
IFX VMMC device driver, version 1.2.1.9, (c) 2007 Infineon Technologies AG
<4>[ 25.430000]
<4>[ 25.540000] 73M1966 Driver, Rev. 2.2.1, (c) 2007 Teridian Semiconductor Corp.
<4>[ 25.540000] Config DANUBE FXO reset using GPIO-10
<4>[ 25.540000] Config DANUBE FXO interrupt using GPIO-1
<4>[ 25.540000] Config DANUBE FXO Chip Select using GPIO-9
<4>[ 25.540000] Config DANUBE FS
<4>[ 25.550000] Config DANUBE PCLK
<4>[ 25.570000]
<4>[ 25.570000]
<4>[ 25.570000] 73M1966 TAPI CTL, version 1.3.7, (c) 2007 Teridian Semiconductor Corp.
<4>[ 25.570000]
<4>[ 25.570000] m1966_tapi_ctl_init: CHRDEV registration completed successfully
<6>[ 25.920000] dwc3884-hcd: irq 54, addr be101000
<6>[ 25.920000] usb.c: new USB bus registered, assigned bus number 1
<6>[ 26.050000] hub.c: USB hub found
<6>[ 26.050000] hub.c: 1 port detected
<7>[ 26.050000] dwc3884-hcd.c:1089: set_port_feature(c034d440, 0x8, 1)
<7>[ 26.050000] dwc3884-hcd.c:1099: USB_PORT_FEAT_POWER
<4>[ 27.590000] Vinetic: Using BBD file UK_BT_FXS.BIN
<4>[ 28.690000] ok!
<4>[ 28.690000] Version 11.3.1.1.0 up and running...
<4>[ 28.840000]
<4>[ 28.840000] m1966_tapi_open: dev_major:[221], dev_minor:[0]
<4>[ 28.840000] m1966_tapi_open: Open Tapi DAA Driver, successful, device: 0
<4>[ 28.840000] m1966_process_ctl: COUNTRY:UK
<4>[ 28.840000] FXO RESET 0->1
<4>[ 30.370000] VINETIC chip capabilities:
<4>[ 30.370000] Type: 0 Specific: 0 Description: INFINEON TECHNOLOGIES
<4>[ 30.370000] Type: 1 Specific: 6 Description: VMMC
<4>[ 30.370000] Type: 2 Specific: 0 Description: POTS
<4>[ 30.370000] Type: 2 Specific: 1 Description: PSTN
<4>[ 30.370000] Type: 11 Specific: 6 Description: DEVICE TYPE
<4>[ 30.370000] Type: 10 Specific: 258 Description: DEVICE VERSION
<4>[ 30.370000] Type: 4 Specific: 0 Description: DSP
<4>[ 30.370000] Type: 3 Specific: 12 Description: G.726 16 kbps
<4>[ 30.370000] Type: 3 Specific: 13 Description: G.726 24 kbps
<4>[ 30.370000] Type: 3 Specific: 14 Description: G.726 32 kbps
<4>[ 30.370000] Type: 3 Specific: 15 Description: G.726 40 kbps
<4>[ 30.370000] Type: 3 Specific: 8 Description: u-LAW
<4>[ 30.370000] Type: 3 Specific: 9 Description: A-LAW
<4>[ 30.370000] Type: 3 Specific: 1 Description: G.723 6.3kbps
<4>[ 30.370000] Type: 3 Specific: 2 Description: G.723 5.3kbps
<4>[ 30.370000] Type: 3 Specific: 7 Description: G.729
<4>[ 30.370000] Type: 3