HC6800EM3 Activity
English Examples Projects for HC6800EM3 MCU devkit
Status: Pre-Alpha
Brought to you by:
mgruber
Activity for HC6800EM3
-
Mathias Gruber posted a comment on a wiki page
Presumably you've received the 8051-compatible MCU. Download the CD from this project. Use this example: Part 3 x51 Source Code/1. LED's/1. LED Blinking/C Version. Then follow this Tutorial: Part 1 Tutorials/51 Firmware Download Instructions.pdf to flash it to the MCU. THis is a good starting point. For real programming you have to carefully check each example. Most of the examples have Chinese comments, use Google translate as help. Basic digital electronic knowledge is always required, so read...
-
Adam Babasule posted a comment on a wiki page
please can anyone help mw with a guide on how to use the micocomputer(HC6800)
-
Jiga board MSP430FR2476TP
-
Jiga board MSP430F2416TPM Updates
-
Jiga board MSP430F2416TPM
-
Detailed hardware design and output files for JLPCB fabrication order.
-
Moved project to STM32F103CB
-
Added a Jtag primitive sequencer
-
Code cleanup
-
- More commands migrated
-
- Improved results with a MSP430Xv2
-
- Refactoring of funclets according to MCU architecture
-
- Massive bit-bang timing improvements to limit ARM speed to MSP JTAG max TCLK speed
-
- Added DMA class template
-
* Refactoring of Timer and SPI templates
-
- Renamed ChipInfo to ChipProfile
-
- Improved identification based on mspdebug features.
-
- Pretty decent Chip identification
-
- stable ChipInfo.h information scripts
-
- Started ChipInfo.h information scripts
-
- Extractor for the official MSP430 Chip DB (published in MSP430_DLL_Developer_Package_Rev_3_15_1_1)
-
File names matcjhing class names.
-
Combined two classes -- a layer level used in mspdebug that is not needed here.
-
A promissing state for the Flash read routines
-
- Moved Jtag TAP code into a class
-
Sync of bmt versions on projects 01 and 02
-
Speed improvement by using an FT232 and higher Baud rate
-
fixes, fixes
-
Inline optimizations
-
Added help menu
-
Black Magic MSPDebug in a Working state
-
New UART class layout for template library
-
- BlackMagic MSPDebug
-
- Updates on the uart.h
-
- BlackMagic MSPDebug added
-
Frozen first port of BMP430
-
- Missing solution file
-
- Added BMP430 project (this is a simple checkpoint)
-
- Lots of fixes on bmt library
-
- Created bmt library as a static library (libbmt.a)
-
- Some minor tuning for the benchmark project.
-
Phase 2: Simple code checkpoint
-
Start of Phase 2: base files
-
- Bare Metal Library (1st version)
-
Restructure to initiate the bmt (bare metal template) library
-
- Benchmarks with new MSP430 GCC 9.3.1
-
Removed BSP (now part of VisualGDB)
-
Project 1 complete
-
- Updates on Proj 1
-
- Updates to the template class library
-
Building a C++ class template for low power applications tuned for HC6800EM3
-
- Updated DVD lists
-
- More benchmarking
-
- More flashing instructions (for ARM)
-
- Added STM32F103C8 target
-
- Fixed path with spaces; they were causing issues in gdb
-
- Fixed path with spaces; they were causing issues in gdb
-
Started Benchmark tool for different MCUs
-
Updates for supported MCU in CodeBlocks
-
KiCad project for MSP430G2955
-
SiavoshKC posted a comment on a wiki page
My prechin doesn't have usual AD/Da IC (PCF8591). Instead it has two other chips. h2046 and LM358. Does anyone knows why?
-
New MSP430G2995 Daughterboard
-
- Latest changes
-
Alexander Dikiy posted a comment on discussion General Discussion
Thanks, I'll try.
-
This requires the Visual C redistributables to be installed, but I am not not sure which version. This is a software piece that came in Chinese and I made a translation directly in the binary file, which, for obvious reasons, is very limited. I recommend to use the "stc-isp-15xx-v6.86E.exe" instead.
-
This requires the Visual C redistributables to be installed, but I am not not sure which version. This is a software piece that came in Chinese. I recommend to use the "stc-isp-15xx-v6.86E.exe" instead.
-
Yeah, one of my target was a direct replacement of the "original" chinese DVD. I am dropping some contents that are easily found online, like the datasheets, and replace by links to reduce the contents. The first releases removed the illegal contents that came with the "original" piece, and replace by open alternatives.
-
No, not to my knowledge. Seems that no part uses VCC/GND, at the same pins as a 8051. A daughterboard would be required, as for the STM32 part.
-
skygunner posted a comment on discussion General Discussion
Hi, Thanks for the great work to bring all of this to the people who needs it. Just want to ask if this kit is compatible with PIC mcu? Or just for 51/STC/AVR/STM? Cheers,
-
If it's a big archive file, people won't be able to check what's inside unless download the whole of it. Cheers,
-
-Updated install instructions
-
-Reorganization
-
-Simple updates
-
-Renamed files with whitespaces
-
-Renamed files with whitespaces
-
Updated DVD builder (in progress)
-
Updated DVD builder (in progress)
-
- Fixed lots of simple setup issues for the examples
-
- Codeblocks settings for official Microchip AVR compiler
-
- Reorganization
-
-New folder structure for tutorials
-
Added/updated tutorials
-
Home
-
arduino_3_ptb
-
arduino_3_ptb
-
arduino_2b_ptb
-
arduino_2b_ptb
-
Home
-
Home
-
arduino_2_ptb
-
arduino_2_ptb
-
arduino_2_ptb
-
Home
-
arduino_1_ptb
-
arduino_1_ptb
-
verifying_ptb
-
detailed_view_ptb
-
51_flash_ptb
-
51_flash
-
Home
1 >