Re: [Hamlib-developer] Yaesu FTX-1

[Michael M. <cmo...@gm...>]

I figured out the issue.  I had to adjust FTX1_POST_WRITE_DELAY from 2 to 5

> On Aug 3, 2025, at 11:38 AM, Michael Morgan <cmo...@gm...> wrote:
> 
> I got my radio on Friday and just got around to tinkering with it today.  I’m not sure if someone else is working on this, but I saw the initial code was committed.  Initially when connecting to the rig I would get frequency but couldn’t change the frequency.  I found the issue with that.  But now for some reason it keeps just hanging at times.  Look at this debug - 4053ms when WSJT is setting the frequency.  I am using WSJT to test connection to a rigctld instance.  It don’t always do that just sometimes.  But often enough it is problematic. - Michael, AA5SH
> 
> write_block(): TX 3 bytes
> 0000    46 41 3b                                            FA;             
> read_string_generic(): RX 12 characters, direct=1
> 0000    46 41 30 31 38 31 30 30 30 35 35 3b                 FA018100055;    
> newcat_get_cmd: read count = 12, ret_data = FA018100055;
> *****5:newcat.c(11436):newcat_get_cmd returning(0) 
> newcat_get_freq: freq = 18100055 Hz for vfo VFOA
> ****4:newcat.c(1508):newcat_get_freq returning(0) 
> rig_get_band called
> ***3:rig_get_freq: elapsed=10ms
> rig_lock: client lock disengaged
> ***3:rig.c(2752):rig_get_freq returning(0) 
> newcat.c(1150)newcat_set_freq: checking VFOA for band change 
> newcat_band_index: freq=1.81e+07, band=6
> newcat_band_index: freq=1.81001e+07, band=6
> newcat_set_freq: VFO_A band changing=0
> newcat_valid_command BS
> newcat.c(8271):newcat_valid_command returning2(1) 
> newcat_set_freq: is_ft991=0, CACHE(rig)->split=0, vfo=VFOA
> newcat_set_freq:1398 cmd_str = FA018100000;
> ***3:newcat.c(11695):newcat_set_cmd entered
> cmd_str = FA018100000;
> ****4:newcat.c(11452):newcat_set_cmd_validate entered
> newcat_set_cmd_validate: priv->cmd_str=FA018100000;
> write_block(): TX 12 bytes
> 0000    46 41 30 31 38 31 30 30 30 30 30 3b                 FA018100000;    
> write_block(): TX 3 bytes
> 0000    46 41 3b                                            FA;             
> ****4:newcat.c(11630):newcat_set_cmd_validate returning(0) 
> newcat_set_cmd: cmd_validate OK
> ***3:newcat.c(11712):newcat_set_cmd returning(0) 
> newcat_band_index: freq=1.81e+07, band=6
> newcat_band_index: freq=1.81001e+07, band=6
> newcat_band_index: freq=1.81e+07, band=6
> newcat_band_index: freq=1.81001e+07, band=6
> newcat_set_freq: band changing? old=6, new=6
> **2:newcat.c(1424):newcat_set_freq returning(0) 
> rig_set_freq: vfo=VFOA, save=VFOA
> *1:rig_set_freq: elapsed=4053ms
> 
> 
>